Skip to content
GullySales

Bathroom fitting manufacturers · Follow up systems

Make sure no sample set, quote or plumber demonstration goes quiet after the first visit.

A follow-up system for a bathroom fitting maker is the set of reminders and messages that move a dealer, builder or designer from first contact to an order. GullySales writes the steps, the messages and the log so a quiet lead is noticed before it is lost.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Bathroom fittings including a basin, tap and shower

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For bathroom fitting manufacturers

Where it usually goes wrong, and what we would do.

  • “Sample sets go out and silence follows”

    A finish board reaches a designer's studio and nobody calls. The designer files it. A reminder tied to the dispatch, with a question about the finish, turns an object on a shelf into a conversation.

  • “Quotes to builders age without notice”

    A set-wise quote is sent to a project office and the project moves on. A dated follow-up that asks about the stage of the show flat keeps your quote alive when a purchase decision arrives.

  • “Plumbers forget the demonstration”

    A plumber who attended a session at a dealer counter is warm for a few visits and then drifts. A call that asks how the sample set fitted, and offers spares, keeps the brand on the list.

  • “Dealers go quiet after the first order”

    A new dealer orders, sells slowly and stops reordering without saying why. A check on which finishes moved and which sit on the shelf lets you fix the stock before the dealer drops the range.

What we do

What we deliver for bathroom fitting manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up calendar by buyer

    A set of steps for each of dealer, plumber, builder and designer, with what is said at each contact.

    Result: Every buyer type has a written next step after the first contact.

  2. Message templates

    Short messages for sample dispatch, quote follow-up, demonstration thanks and reorder checks, in plain English and local languages.

    Result: Your team sends a consistent message instead of writing one each time.

  3. Reminder set-up

    Reminders in your CRM or phone tied to the date a sample or quote leaves.

    Result: A manager can open a list of follow-ups due and see who owns each.

  4. Dormant dealer list

    A list of dealers who ordered once and have not reordered, with a call script for each.

    Result: The sales team knows which dealers to revisit first.

  5. Outcome log

    A column recording why a lead moved on, stalled or ordered.

    Result: Reasons are collected so the next quarter's steps can change.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Messages and moments that keep a trade lead alive.

Call after a sample set arrives
Ask whether the designer or dealer has shown it to the client, and note the finish they liked.
Quote follow-up to a builder
A message that restates the set contents and price, with the delivery schedule they asked for.
Plumber demonstration reminder
A thank-you note after a demonstration, with the dealer's name where they can buy the product.
Dormant dealer call
Ask what is selling and what is stuck on the shelf. Record the reason for a slow month.
Claim status update to a dealer
A short message when a warranty claim moves, so the dealer is never the last to know.

Who it is for

This is written for these bathroom fitting manufacturers.

  • Brass tap and mixer manufacturers
  • Stainless steel bathroom fitting makers
  • Shower, shower panel and rain shower producers
  • Concealed body, diverter and flush valve makers
  • Health faucet, jet spray and accessory makers
  • CP and PVD finish specialists supplying designer ranges
  • Hospital and hotel fitting suppliers
  • Regional makers supplying plumbers and dealers in one area

Before you decide

When this may not be the right fit.

  • Your sample sets go out without a record of who received them, so a follow-up call would not know what to ask.
  • No one owns the quote to a builder, and a message from the wrong person would confuse the purchase officer.
  • You have not set a rule for when to stop calling a lead that has gone silent.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for bathroom fitting manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from bathroom fitting manufacturers. Anything missing is noted in the written scope, with who will supply it.

Sample dispatch and quote records
Bring the dispatch register for sample sets and the quote file, even in paper form. We trace outcomes from them. Without these, we cannot see where follow-up breaks and the first calendar is built blind. If the register is a ledger, a photograph of the pages is enough for us to trace what happened to each entry. Include the dates of dispatch, where available, so ageing quotes can be spotted at a glance.
Names of the people who will chase
List the staff and what each can promise, such as discounts or visits. They must be willing to use the calendar. If the owner alone can approve discounts, we write the messages without one. Mention who may offer a visit, a sample or a better term, because follow-up that promises what staff cannot give does harm. Include any discount limits that apply to each person, so a reminder never invites an offer that cannot be honoured.
A rule for how long a quote stays open
Decide when a quote lapses and what happens to the price. Builders need to know. If the rule is unwritten, follow-up messages avoid dates, and buyers assume nothing expires. Builders need to know whether a price holds until the project clears, so state your practice even if the answer is it depends. Add the practice for repeat project buyers, who need a different rhythm of contact from dealers.
Your position on dormant dealers
Say whether you want to win back dealers who stopped ordering and what you will offer. A message needs a reason to call. Without a position, the dormant list is built but not used. If you prefer not to chase, say so, and we write the list as a reminder for the next order, not a plea to return. Say if you want a reminder only for some buyers, and we leave the rest to your own judgement.
A shared place to see the day's calls
Choose the sheet, tool or whiteboard the team will look at each morning. It should already be in use. If a new place is imposed, it is abandoned in a few weeks, so we fit into what exists. A shared sheet works; the point is that everyone looks at the same place, and it stays the place after we leave.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace the last twenty sample sets and quotes

    We take the latest sample sets and quotes you sent and find out what happened to each: who called back, when and with what result. You tell us which went silent. This shows where the chase breaks, and gives the starting figures we read against. We write down the date sent, the date of the last contact and the answer given, so each case is a short story we can read.

  2. 2

    Set who chases which buyer

    With your sales head we decide that one person owns dealer follow-up, another builder quotes and a third plumber visits. You name them. A follow-up that belongs to everyone is done by no one, so each name is written beside its task. The roles are written in a single line each, and a stand-in is named for days when the owner of a task is on tour.

  3. 3

    Write messages for each stage

    For every stage we draft the call opening and the WhatsApp text: after a sample set, after a quote, after a demonstration and after a first order. Your staff change the wording until it sounds natural. Nothing promises a price or a date you have not approved. The text for a quote names the specific finish and set, because a generic reminder is easy to ignore.

  4. 4

    Build the calendar and the reminders

    We place the reminders in the tool or sheet you already use, with each buyer's next step and owner. A salesperson opens it each morning and sees who needs a call. We test with real open quotes and fix the wording of any reminder that confuses. Reminders that cause confusion are rewritten, and any that nobody acts on within a few trials are removed.

  5. 5

    List dormant dealers and decide who calls them

    We pull the dealers who ordered before and have gone silent, and sort them by value and cause. You decide which ones the managing person phones personally. For others we write a gentler message that asks what changed. The managing person's calls go first to dealers who gave the largest orders, and the rest receive a note that asks a single question.

  6. 6

    Compare closed quotes with the earlier log

    We read the outcome log against the quotes and samples recorded before the system began: how many were answered, won, lost or left open. Your sales head tells us which messages worked. You decide which steps to keep and which to drop. We also look at the quotes that stalled and note at which stage, since a stall at the same stage points to the same cause.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many follow-ups are enough?
There is no fixed count. Follow up until the buyer says yes, no or not now, and then record which. Stop when asked, and keep the contact for a future launch.
Should follow-ups go by phone or WhatsApp?
Dealers and plumbers respond to a call or a short WhatsApp message; builders and designers also read email. Match the channel to the person and respect a request to stop.
What about leads from marketplaces?
Treat them the same way, but first sort dealers from retail buyers. A reply with the right dealer's name is a follow-up too.
What if a dealer says they are happy with another brand?
Ask what the dealer would need before adding yours alongside, such as a finish they lack or a faster spare. Record the answer and return when you have it. A dealer can carry two brands, and you need not replace the first.
How do we avoid pestering a dealer?
We limit follow-up to moments where you have something to say: a sample set arriving, a quote ageing, a new finish or a claim closed. Each message carries a reason and a next step. A dealer who asks to stop is marked in the record and not contacted again by anyone in your team, which keeps your name clean in the market. If a dealer says that another brand serves them well, we thank them, note the reason and leave a single door open, such as a new finish or a better spares service.
Should the owner call the large builders?
For the largest project buyers, yes, because a call from the owner shows that the order matters. We mark those accounts in the calendar so the owner sees them, and the sales team handles the rest. You choose which accounts qualify, and we adjust the list as projects close or new ones open. The log of closed and lost quotes keeps their reasons, so the same lost reason is not met by the same reply twice. We also keep a note of what each lost dealer said, so the sales head sees patterns across towns and can act on them.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.