Skip to content
GullySales

Blow moulding companies · Website

Build a site where a brand owner can match a bottle to a pack in a few clicks.

A website for a blow moulder is a catalogue and a proof of capability, organised so a packaging buyer can match a bottle, understand the mould arrangement and send a specification. GullySales works on the page structure, the specification layout and the enquiry form.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For blow moulding companies

Where it usually goes wrong, and what we would do.

  • “Buyers want specifications beside photographs”

    A picture of a bottle without capacity, weight and neck finish forces a call. Place the figures next to the image, in the same order on every page, so a buyer can compare shapes without opening a PDF.

  • “Capability is hard to prove from a distance”

    A buyer in another state cannot see your machines. Photographs of the plant, the mould store and the inspection table, with plain captions, show a working unit and not a trading desk.

  • “The form asks too much or too little”

    A form with five fields of contact details and nothing about the bottle wastes the first reply. Asking for capacity, neck finish, material and expected lot lets the first answer be useful.

  • “Phone visitors need their own layout”

    Buyers open the site from a phone between meetings. Large tables that need sideways scrolling lose them, so specifications must read well on a small screen.

What we do

What we deliver for blow moulding companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A bottle family structure

    Pages for each shape family with specification tables, photographs and the packs each suits.

    Result: A buyer can reach their bottle in few clicks.

  2. A capability page

    The machines, moulds held, inspection routine and packing, shown with real photographs.

    Result: A visitor sees what the unit can run.

  3. A mould and ownership page

    Plain terms on mould ownership, trial samples and how the cost is shared.

    Result: A buyer finds the answer before asking.

  4. A specification enquiry form

    A form that collects the bottle details and the buyer's pack, and writes into the enquiry record.

    Result: Each enquiry arrives with enough detail for a useful reply.

  5. Mobile checks

    Pages tested on small screens, with tables that fit and buttons that can be pressed.

    Result: Specifications are readable on a phone.

  6. Document downloads

    A catalogue and a short company profile that match the pages.

    Result: The files and the site give the same figures.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The questions a visitor brings to a bottle maker's site, and the page that replies.

bottle neck finish and closure compatibility
Each bottle page lists the neck finish and the closure that fits, so a buyer can match before asking.
blow moulding machine capacity
A capability page naming the machine types, bottle size range and the materials you run. Add photographs of the floor.
who owns the mould
A mould and ownership page stating your policy in plain words and what the buyer receives. It answers a question buyers fear to ask.
download bottle specification sheet
A downloads area with one sheet per bottle family, showing capacity, weight and material.
sample request for a plastic bottle
A short form asking product, capacity, neck and volume. It routes stock and custom requests to different people.

Who it is for

This is written for these blow moulding companies.

  • HDPE bottle and jerry can makers
  • Extrusion blow moulders for lubricant and edible oil packs
  • Pharma syrup and tablet container makers
  • Agrochemical and pesticide bottle makers
  • Household chemical and home-care bottle makers
  • Drum and large container moulders
  • PET stretch blow moulders for water and soft drink bottles
  • Cosmetic and personal-care bottle makers

Before you decide

When this may not be the right fit.

  • Your bottle specifications are held in different people's heads, so the site would be filled with soft words.
  • You are unsure whether you will keep the mould policy, and a page would commit you to it.
  • You want a cart for bottles, when each order needs a spec match and a sample first.

Before you decide

Agree the work. Know how to judge it.

Websites for blow moulding companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from blow moulding companies. Anything missing is noted in the written scope, with who will supply it.

Photographs of every bottle in the range
Provide a front and side picture of each bottle against a plain background. Without them the catalogue is plain tables, which buyers find hard to compare. Pictures should be taken in daylight with the signboard, base and neck visible, and with the bottle upright and clean.
A machine and capacity list
Supply the presses, ranges and capacities for the capability page. If you prefer not to publish capacity, say so, and we describe the range of products the presses can serve.
Quality and material certificates
Share the certificates you hold, exactly as issued. We quote only what they support. If you are unsure of their scope, check with the issuing body. Quote them as issued, and if a certificate is near expiry, tell us, since the page must not outlive it.
Domain and hosting access
Tell us who holds them and give access. Without it, we build on a temporary address and launch waits. If the domain is held by a former web builder, a written request from you releases it.
Your policy on custom moulds
State minimum lots, who owns tooling and what you will not make. The page repeats it. If undecided, the page invites a conversation. A short paragraph is enough, and it can mention the typical lot sizes you work with.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the present site as a packaging buyer

    We open your site as a brand's packaging manager would, looking for a bottle that matches their pack, and note where we give up. You tell us what the site says that is out of date. The result is a list of what to keep, change and remove. The notes are shared with you before anything is redesigned.

  2. 2

    Gather drawings, photographs and certificates

    We collect the specification for each bottle family, clear photographs, the material and quality certificates you hold and the details of your equipment. You supply or locate them. Missing items are listed because the build depends on them. We list any certificate or drawing you cannot find, so that you can decide whether to leave that claim off.

  3. 3

    Draw the family structure of the catalogue

    We sketch how the bottles are grouped: by use, size and material, so a buyer can narrow down in a few clicks. You approve the structure. The aim is that a buyer can match a bottle to a pack without ringing you. The structure is tested by asking someone outside the plant to find a bottle for a described pack.

  4. 4

    Write the capability and mould pages

    We draft the capability page from the machine list and a floor walk, and the mould page that explains ownership and process. Your engineer reads each for accuracy. The pages say only what the plant can show. The pages state what you make and do not claim what you do not, as buyers check.

  5. 5

    Build the specification enquiry form

    We design a short form asking for capacity, neck, material, product, quantity and an attachment for a drawing. We test it by sending entries and following them to the person who answers. You decide who owns the replies. Fields that discourage buyers, such as a required company registration number, are removed unless you need them.

  6. 6

    Test on a phone and publish

    We check the catalogue pages and downloads on a phone, correct tables that do not fit the screen, and after your approval publish with redirects for old addresses. After launch we compare enquiries with the old site's figures noted before. Redirects keep old links from breaking, which protects any search standing the old pages had.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we publish prices on the site?
Bottle prices move with resin cost and lot size, so publish none or a range only if your owner agrees. Say what shapes you stock and how a quote is made, and let the form collect what you need to price.
Do we need a whole new website?
Not always. We review the current site first and decide whether to restructure it or add the missing pages, since the cheaper route is enough.
What goes on the capability page?
The machines by type, the size range of bottles they make, the resins you run and the checks at the plant, each with a photograph. A buyer cannot visit before enquiring, so the page stands in for the visit.
How should the site handle a request for a bottle we do not make?
Say plainly which shapes and sizes you cover and offer the custom route only if you take moulds. A buyer who finds a clear no leaves politely, and one who finds a vague yes wastes your time.
Can buyers download drawings from the site?
Stock bottle drawings can be offered as downloads, and packaging managers expect them. Custom mould drawings belong to the customer and stay private. We set the downloads as a short document list on each family page, with the drawing and specification sheet, and ask you to confirm that each file shows only what you are willing to share. A download link counts as an enquiry when the form asks for a name first, if you choose that. A stock bottle with a fixed price can still be shown with a line that the figure depends on lot size and is confirmed on request.
Should the site list the brands we already supply?
Only those who have agreed in writing. A list of well-known customers is strong proof, and a list without consent is a breach of trust. If few have agreed, describe the kinds of product you fill instead, such as lubricant packs or pesticide bottles, without names. We also leave out any brand that is a competitor of a current customer, since they may object to being listed alongside. We then read the replies together after a period of use, so the wording on the page can change.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.