Skip to content
GullySales

Brick manufacturers · CRM

Keep every contractor, quote and advance in one place the whole kiln can open.

A CRM for a brick kiln is a record of every buyer, enquiry, quote, advance and delivery, so that nobody has to remember who asked for what. GullySales sets up a simple system the yard staff will actually use, starting from what you already keep in notebooks and phones.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A building materials team reviews blocks, pavers and roofing samples

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For brick manufacturers

Where it usually goes wrong, and what we would do.

  • “The second call should start where the first stopped”

    A contractor rings twice for a rate and the person who picks up has no record of the first. The buyer notices, and the kiln looks disorganised next to the one that remembers the quantity and the site.

  • “The notebook leaves with the person”

    Rates, advances and promised dates sit in the manager's diary or the owner's phone. When that person is away, or leaves, the order book goes with them and the kiln starts again.

  • “Advances and deliveries need a single trail”

    An advance taken, a lot reserved and a truck sent are three events on one order. When they are written in three places, the buyer is asked the same question again, and a dispute has no clear record.

What we do

What we deliver for brick manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A buyer and agent register

    Every contractor, developer, mason and agent with phone, site, past orders and the person at the kiln who handles them.

    Result: Searching a name or number brings up that buyer's full history.

  2. An enquiry and quote record

    A form for each enquiry with site, quantity, grade, rate quoted, date and next action, usable from a phone.

    Result: A repeat caller's earlier quote is on screen when the phone rings.

  3. An order and advance sheet

    A record linking each order to the advance received, the lot reserved and the planned dispatch date.

    Result: One entry shows the advance, the reserved lot and the dispatch plan for an order.

  4. A delivery log

    Truck, driver, load, dispatch time and the name of the person who received the bricks at the site.

    Result: Each delivery shows who received it, so any dispute starts from a record.

  5. Staff training on the system

    A session with the yard and office staff on entering a call as it ends and reading the day's follow-up list.

    Result: The people who answer the phone use the record without being reminded.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Fields a kiln's record needs for buyers, quotes, advances and loads.

Buyer type and site town
Entered by whoever takes the call. It lets you list every mason, contractor and developer by the town you serve them in.
Brick, grade and quantity quoted
Entered with the quote. The next call starts where the last one stopped, and no one quotes a different grade by mistake.
Advance taken and the firing it belongs to
Entered by the owner or the accounts person. It ties money to a lot and prevents a dispute about which firing the buyer's bricks came from.
Agent's name and the end buyer
Entered when known. It gives you a path to the buyer that does not run through the agent alone.
Delivery date, truck and breakage noted
Entered by the yard on dispatch and by the buyer on receipt. It shows where complaints come from.

Who it is for

This is written for these brick manufacturers.

  • Red clay brick kilns firing in the dry season
  • Wire-cut and extruded brick units
  • Fly ash brick makers
  • Kilns selling mainly through local agents and dealers
  • Kilns supplying developers and contractors by contract
  • Producers of facing, hollow or perforated bricks
  • Smaller kilns near growing towns selling straight to masons
  • Units that also make tiles, roofing or other clay products

Before you decide

When this may not be the right fit.

  • Nobody at the yard types into a phone, so loads would be entered a week late or not at all.
  • You have not agreed what counts as an advance and what counts as payment, so the record would argue with the books.
  • You want software to find buyers, when its first use is remembering the ones you have.

Before you decide

Agree the work. Know how to judge it.

CRM for brick manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from brick manufacturers. Anything missing is noted in the written scope, with who will supply it.

The account notebook and the order book
These books are the record the system replaces, and we must read them to design the registers properly. Photographs of the pages are enough. Without them, the registers begin empty, the history of repeat buyers is lost and the staff are left typing from memory for weeks. If pages are torn or water-stained, send what is readable and tell us what is missing, so we know the limits of the history.
Phone contacts of buyers and agents
The contacts on the owner's phone and the yard phone are the real buyer list, some of them saved by nickname or by town. Export them or send screenshots. Without them, the register has to be typed from the books, and agents saved only by nickname are missed entirely. Tell us also which numbers belong to the same buyer, so one person does not appear twice.
A list of live orders and advances
Open orders and advances are the first records entered, so give us the buyer, the quantity, the advance paid and the date promised for each. Without them, the system begins with no orders in it, and the staff go on using the notebook because it is the only place with the truth. A list on paper is fine, and it is the first test of whether the register can carry the kiln's real work.
A phone or computer at the yard
Yard staff need a device on which to enter data, and a shared phone is enough. If none exists, we design for the owner's phone and the office, and we say plainly that entries from the yard will then be delayed until someone sits down to make them. Note who will hold the device, since a phone passed between three people loses entries and confuses the record.
A named keeper of the register
One person must see that entries are made and gaps are chased, whether it is the owner, an accountant or a supervisor. Name that person now. Without one, entries lapse during the busy firing season, and the register stops matching what is happening in the yard. The keeper also decides when the old notebook stops being written in, which is the moment the register becomes the record.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one order from call to payment

    We take a recent order and follow it from the first call to the quoted rate, the advance, the firing slot, the loading and the final payment. At each point we note where the information was written down and who held it. You correct the path. The stages we record are the kiln's own, not a template borrowed from another trade.

  2. 2

    Gather the notebooks and phone contacts

    You hand over the account books, the loose sheets and the contacts on the owner's and the yard's phones. We list what each source holds and what is repeated across them. Nothing is thrown away or retyped yet. The sources decide which registers the system needs and what goes into it first. Duplicates are marked, not deleted, so that the owner can see which name belongs to which buyer.

  3. 3

    Set up the registers the yard will use

    We build a buyer and agent register, an enquiry and quote record, an order and advance sheet and a delivery log, with fields named in the words the yard already uses. You approve each field. Anything the staff will not fill in standing at the gate is removed, because a long form is a form left empty. We test each field by asking the yard staff to fill in a real call from memory.

  4. 4

    Move the live buyers and orders in

    We enter the open enquiries, orders and advances, and the agents with their towns, and ask you to check the first records for mistakes. The old notebook stays beside the system for a while. From then on, entries are made by the person who takes the call, so the register is never a second job. Records that are incomplete are flagged in a colour, so the gaps are visible from a distance.

  5. 5

    Train the people who answer the phone

    We sit with the owner and the yard staff and enter real calls together, showing each person only the screens they need. You tell us what feels slow or strange. A step that confuses people is changed in the system, not explained again, because a staff member who avoids the register defeats the purpose. We also agree who covers the phone when the owner is at the kiln or in the firing yard.

  6. 6

    Read the register against the old notebook

    After a stretch of orders we compare the register with the notebook and with the counts taken before the setup. You tell us which enquiries and advances the system caught that memory had missed. You then decide when the notebook is retired and who owns the data in the register. Anything the system missed is added, and what it caught is noted so you can judge its worth honestly.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a CRM too complex for a kiln?
Not if it starts as a simple sheet or app that records the buyer, the quantity and the next call. We build only what your staff will keep up with.
What tool should we use?
The one your staff will open every day. We look at what you already use, such as a spreadsheet or a phone app, before suggesting something new.
Who owns the data?
You do. Buyer details and rates stay your record, and we set the system up so that it is readable by the owner without our help.
Should the record hold the buyer's wall photographs?
Keep a link to the photograph and the owner's permission, not the file itself in a shared sheet. A photograph of a built wall is useful proof, but permission to use it must be recorded with it.
Can a spreadsheet do for a small kiln?
It can, if one person owns it and it has the same columns for every buyer. The risk is a notebook that leaves with the person, so settle the fields first and move to a tool when the yard needs to share the list.
Will the yard staff manage a system in English?
We set up the fields in the words your staff use, in English or the local language as they prefer, and keep each screen to a few entries. Training uses your own calls, so each person sees their own work and not a demonstration. If a screen still confuses someone, we simplify it. The aim is a register that staff can fill in standing at the gate with a phone in hand. If someone cannot read or type easily, we set up voice notes against a record so that they still contribute, and the keeper types them in.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.