Skip to content
GullySales

Brick manufacturers · WhatsApp marketing

Run rate cards, load photos and delivery notices through WhatsApp.

WhatsApp marketing for a brick kiln means using the app contractors and masons already open every day for rate cards, stock photographs, order confirmations and delivery notices. GullySales sets up the business number, the messages and the rules for sending them.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A building materials team reviews blocks, pavers and roofing samples

What WhatsApp marketing means

WhatsApp marketing is sending updates, offers and reminders to customers on the app most Indian buyers already check daily. GullySales sets up business WhatsApp, writes the message templates and keeps the list consented and current.

Last updated 14 Nov 2026.

For brick manufacturers

Where it usually goes wrong, and what we would do.

  • “Contractors prefer a message to a call”

    A site engineer on a job cannot always take a call but can read a message later. A rate card, a photograph of the stock and a line giving the delivery date answer much of what the call would have covered.

  • “The delivery message is the most useful one”

    A single message to the buyer and the driver, naming the load, the vehicle, the expected arrival and who unloads, prevents the trucks that wait at a site that is not ready. It also leaves a written record of the dispatch.

  • “Broadcasting to everyone annoys the buyers you want”

    A message sent to a whole contact list about a rate that applies to one quantity wastes attention. Send each message to those who asked, who bought, or who agreed to hear from the kiln, and let anyone opt out.

What we do

What we deliver for brick manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A business number setup

    A WhatsApp Business number with the kiln's name, address, hours, brick types and a catalogue of grades and sizes.

    Result: A buyer who saves the number sees the kiln's name and what it sells.

  2. Standard reply messages

    Saved replies for rate enquiries, site-detail requests, advance details and directions to the yard.

    Result: The staff reply to a common question with one tap, in the same words.

  3. A delivery confirmation template

    A message for the buyer and driver on dispatch day giving load, vehicle, arrival and unloading contact.

    Result: Buyer and driver have the same written instruction for the load.

  4. Contact lists by buyer type

    Separate lists for developers, masons, owner-builders and agents, each with a record of agreement to receive messages.

    Result: A rate notice reaches only the group it was written for.

  5. A sending rulebook

    Written rules on who may send what, when to pause, how to honour a request to stop, and which of the platform's current rules to check.

    Result: Everyone at the kiln knows what may be sent and to whom.

How the result is measured

  • Messages delivered
  • Reply rate
  • Enquiries from WhatsApp

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What to send and save on the kiln's business number.

Rate card with the grade and the date
One message per brick type showing the rate basis and the date it was given. A buyer forwards it to a partner, so the date prevents old rates.
Photograph of the stack and a counted truck
Sent when a buyer asks to see the brick. It shows the grade and the count in one image.
Delivery notice with truck number and driver
Sent when the truck leaves the yard. The buyer or mason is ready at the gate and the load is counted on arrival.
Opt-in note for each contact
Saved when the buyer agrees to receive stock and firing updates. It marks who may receive a broadcast.
Site location pin
Saved against the buyer's record so the driver and the next order use the same drop point.

Who it is for

This is written for these brick manufacturers.

  • Red clay brick kilns firing in the dry season
  • Wire-cut and extruded brick units
  • Fly ash brick makers
  • Kilns selling mainly through local agents and dealers
  • Kilns supplying developers and contractors by contract
  • Producers of facing, hollow or perforated bricks
  • Smaller kilns near growing towns selling straight to masons
  • Units that also make tiles, roofing or other clay products

Before you decide

When this may not be the right fit.

  • Staff use their own phones for buyer chats, so the history leaves the kiln with each person.
  • You plan to message every number in a directory, who never asked to hear from you.
  • Nobody can reply to a chat on the day, which a delivery question expects.

Before you decide

Agree the work. Know how to judge it.

WhatsApp marketing for brick manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Describe how the contact list was collected, what people asked to receive, and which messages are currently sent. Include opt-outs and replies when reviewing campaign performance.

Make the scope clear

Agree the audience, message purpose, sending system, and response owner. Separate promotional communication from order or service updates, and check current platform requirements before launch.

Check the work in use

Test the message with a small appropriate audience before wider use. Check links, reply handling, opt-outs, and whether the response leads to a relevant conversation or order.

Know when to change course

Do not use an unexplained contact list as a shortcut to demand. If recipients do not expect the message, resolve the permission and relevance questions before sending.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from brick manufacturers. Anything missing is noted in the written scope, with who will supply it.

A number the kiln owns
The business profile needs a SIM in the kiln's name, or the owner's, that can receive a verification code. Keep the SIM active and the phone charged. Without one, chats stay on a personal phone and leave the kiln with whoever holds it when staff change. If the number is shared with the family, tell us, and we plan for a separate SIM before the profile is made.
The rate you will print on the card
Only the owner decides the rates and how long they hold, and a date must appear on the card. Tell us the rule for changing it. Without a decision, we leave rates off the card, and the first reply asks the buyer for site details so that a call can follow. A rate valid only for a given day and a given quantity should say so on the card, in the same words.
Past chats with buyers
Screenshots of recent chats, with names hidden, show what buyers ask and how staff reply today. Five or six chats are enough to start. Without them, the standard replies are guesses taken from other trades, and they sound like a company, not like the kiln. If staff would rather not share chats, a typed list of the common questions is a fair substitute.
A breakage policy in plain words
What the kiln does about bricks broken on arrival must be stated in the delivery message, and only the owner can set it. Give us the rule you already follow. If none exists, we ask you to decide before the template is used, because a vague promise leads to disputes at the gate. A rule such as a replacement of broken bricks above a limit, or a share of the loss, should be stated exactly as the kiln applies it.
A decision on staff phones
If staff will send messages from their own phones, the owner should know and agree, since buyers' numbers will then sit on personal handsets. We write the rule either way. Without one, the kiln cannot tell which messages were sent, and cannot find them when a dispute arises. A yes from the owner, written in a message, is enough for the record.

How it works

How the whatsapp marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the chats staff already have with buyers

    We look at the chats on the owner's and the yard's phones, with names hidden, to see what buyers ask first, what staff send back and where a buyer is left waiting. You tell us which chats became orders. The common questions become the standard replies, and the chats that stalled show what to fix. We also note which messages were sent from personal numbers.

  2. 2

    Move the kiln onto a business number

    We help you choose between the free WhatsApp Business app and a paid provider of the business interface, and a kiln with one or two people answering can begin with the app on a number the kiln owns. The profile gets the name, address, working days and brick types. Moving to a paid provider is considered only when the volume of chats outgrows the phone.

  3. 3

    Write the standard replies and the rate card

    We draft replies for the rate question, the sizes and grades, the delivery area and the advance, and a single rate card picture bearing the kiln's name. You edit them. The rate card carries the date it applies from, so that an old card forwarded by an agent is not mistaken for today's rate. Pictures of the card are saved at a size that opens fast on a weak connection.

  4. 4

    Design the delivery message

    We write the message sent when a truck is loaded and again on arrival, with the truck number, the quantity, the grade and who to call about breakage. You decide what the kiln will do about broken bricks and we write the rule in the message. The same template is used for every load, so buyers learn what to expect.

  5. 5

    Sort contacts and agree the sending rules

    We separate contacts into agents, contractors, masons and owner-builders, and agree who gets rate cards, who gets delivery notices and who gets nothing unless they ask. You decide whether staff may use their own phones. The rules fit on one page and are shared with everyone who sends a message for the kiln. Contacts are labelled inside the app so each group of buyers can be found when needed.

  6. 6

    Read chats against orders booked

    We count chats, rate requests and delivery messages against the starting figures and ask which chats led to a booked load. You tell us which buyers complained about messages, if any did. Replies that nobody used are removed, and the ones that brought orders are kept near the top of the list. We also check how long buyers waited for a reply, since silence during loading is the usual complaint.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is WhatsApp allowed for marketing messages?
Check the platform's current rules for business messaging, and send only to people who have agreed to hear from you. We build the lists on that basis.
Should we share rates on WhatsApp?
Share a rate card with a date and conditions, and a quote for a specific site on request. Rates move with firing, distance and quantity, so every figure needs a date.
Can staff use their own phones?
They can, but buyer chats then sit on personal phones. We prefer a shared business number, so the history stays with the kiln when a person leaves.
How should the delivery message handle breakage?
Ask the buyer to count and photograph the load at the gate and reply the same day, and say what you will do about breakage found. Bricks are brittle, and a count on arrival is the only fair basis to settle a loss.
Should rate cards go to agents and owners alike?
Send agents the card made for agents and owners the retail one, each marked with its own date. If the two rates are visible to the same person, an argument follows, so keep the lists separate.
Can we send the same rate card to everyone whose number we hold?
It is better to send it to those who have asked or dealt with you before, and to agents who work with your rates. A card sent to everyone annoys people who never asked and can lead to complaints or a blocked number. Check the platform's current rules on messaging, and keep a simple way for anyone to say stop and be taken off the list at once. For a first message to a new number, a short reply to someone who has written to you is safer than a forwarded card.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.