Skip to content
GullySales

CNC turning companies · WhatsApp marketing

Use WhatsApp for drawings, quotes and open lathe hours, with every chat recorded.

WhatsApp marketing for a CNC turning company is using the app where buyers already send drawings, to receive them, answer them and offer open capacity to buyers who have asked. GullySales works on the business number, the message templates and the record behind each chat.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What WhatsApp marketing means

WhatsApp marketing is sending updates, offers and reminders to customers on the app most Indian buyers already check daily. GullySales sets up business WhatsApp, writes the message templates and keeps the list consented and current.

Last updated 14 Nov 2026.

For CNC turning companies

Where it usually goes wrong, and what we would do.

  • “The drawing already arrives on WhatsApp”

    A purchase executive photographs a drawing or forwards a PDF to the owner's phone. Without a business number and a log, the quote depends on one person's memory, and the chat is gone when the phone is changed.

  • “A broadcast works for people who asked”

    Telling past enquirers that the lathes have room for brass or stainless work in certain diameters is useful to them. Messaging strangers from a bought list invites blocks and reports. Check the platform's current rules on opt-in and templates.

  • “A photograph on the gauge closes a doubt”

    A buyer wonders whether a thread class was held. A photograph of the part on the gauge, sent with the lot number, answers in one message and builds trust with the quality side.

  • “One number for the shop, not one per person”

    When a drawing goes to the phone of an employee who leaves, the account leaves too. The business number belongs to the shop, and the team replies from it.

What we do

What we deliver for CNC turning companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A business profile and part catalogue

    A WhatsApp Business profile listing materials, diameter range and industries, with the main part families set out as a catalogue.

    Result: A buyer sees what you cut before sending a drawing.

  2. A drawing intake flow

    A set greeting that asks for material, yearly quantity, tolerance and finish when a drawing arrives.

    Result: The buyer is asked once, not twice.

  3. A set of quick replies

    Saved replies for acknowledgement, bar rate validity, sample dispatch and inspection follow-up.

    Result: Replies are consistent whoever is at the phone.

  4. An opt-in list of enquirers and buyers

    A list of people who have agreed to hear from you, with the part family each cares about.

    Result: Broadcasts go only to people who asked.

  5. An open-capacity broadcast format

    A short message that lists the materials and diameters the lathes can take, sent to the opt-in list.

    Result: Spare lathe hours are offered first to known buyers.

  6. A chat-to-tracker log

    A rule that each drawing received in a chat is written on the quote tracker with its source.

    Result: No drawing exists only in a chat.

How the result is measured

  • Messages delivered
  • Reply rate
  • Enquiries from WhatsApp

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

The messages a turning shop should have ready on one business number.

Drawing intake reply
A saved message listing what to send with a drawing: material, annual volume, bar supply, threads and the date needed. It stops the estimator retyping the same questions.
Gauge photograph
A close photograph of the part on the gauge with the reading visible, sent when a buyer doubts a dimension. It settles the question without a visit.
Quote with its validity note
Send the rate with the bar rate date and the revision priced. It makes the quote easy to reopen and hard to dispute.
Open lathe hours message
A short broadcast to buyers who agreed, saying which machines and materials have room. Send it only when the capacity is real.
Dispatch message with lot photograph
A photograph of the packed lot, the count and the transporter. Ask the buyer to confirm receipt, which opens the next order.

Who it is for

This is written for these CNC turning companies.

  • Brass and copper turned parts makers for electrical and plumbing fittings
  • Auto ancillary turned component suppliers
  • Swiss-type and sliding head shops making small precision parts
  • Shafts, spindles and pins for pump and valve makers
  • Hydraulic and pneumatic fitting turners
  • Bar-fed high volume turning shops running call-off schedules
  • Turn-mill shops making complex parts in one setting
  • Job-work lathe shops serving other machining units

Before you decide

When this may not be the right fit.

  • Each person in the shop uses a personal number for buyers, and the owner will not agree on one shop number first
  • You hold no list of buyers who agreed to hear from you, and sending to every card collected at an exhibition risks complaints

Before you decide

Agree the work. Know how to judge it.

WhatsApp marketing for CNC turning shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Describe how the contact list was collected, what people asked to receive, and which messages are currently sent. Include opt-outs and replies when reviewing campaign performance.

Make the scope clear

Agree the audience, message purpose, sending system, and response owner. Separate promotional communication from order or service updates, and check current platform requirements before launch.

Check the work in use

Test the message with a small appropriate audience before wider use. Check links, reply handling, opt-outs, and whether the response leads to a relevant conversation or order.

Know when to change course

Do not use an unexplained contact list as a shortcut to demand. If recipients do not expect the message, resolve the permission and relevance questions before sending.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from CNC turning companies. Anything missing is noted in the written scope, with who will supply it.

One shop number, not several personal ones
Choose a number that belongs to the business. Buyers now message whoever they know, so conversations are spread over phones. Without one number, history leaves with each person, and no label can be applied across the shop.
A phone kept charged by the estimator
Assign the device that runs the Business app and say who holds it. If it goes home with one person and nobody covers, messages wait overnight. A second linked device can be arranged.
Contacts who asked to hear from you
List the buyers who messaged you or requested updates. A broadcast to people who did not agree harms the number. Without such a list we send no broadcast and rely on one-to-one replies.
Photographs of gauge checks and finished lots
Provide pictures of parts on the gauge, or lots in trays, in original size. A photograph on the gauge closes a doubt fast. If none exist, we plan a short shoot, and the catalogue starts small.
Your rule on confidential drawings in chat
Decide when a drawing may be sent back on WhatsApp for confirmation, and for which customers it may not. Some customers forbid it. Without a rule, each estimator chooses alone, and one slip can lose a customer. We write that rule into the saved replies so the estimator does not have to decide it fresh each time.

How it works

How the whatsapp marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the chats where drawings first arrived

    We go through recent threads in which a drawing was sent on WhatsApp, noting the first message, the estimator's questions and where the thread went cold. You exclude any thread that is private. These chats show what the quick replies must ask first. We also mark threads in which the buyer's first message was a photograph of a part and not a drawing.

  2. 2

    Choose the Business app or the API

    We explain both and ask how many people answer and how many chats arrive. A small turning shop needs only the Business app. You choose, and we write the reason down. The choice sets what we can automate and who can see the chats.

  3. 3

    Set up the profile and part catalogue

    We write the business profile with the unit address and a short line on materials and sizes, and build a catalogue of part families with photographs. You remove any part carrying a customer's mark. The catalogue answers a buyer before the call.

  4. 4

    Write the drawing intake flow and quick replies

    With the estimator we write the replies that ask for what is missing: drawing revision, material, annual volume and trial quantity. The estimator tests them on real chats and shortens any that feel stiff. Together they turn a bare drawing into a quote request. The replies also list the formats of file you can open, so the buyer does not send one that waits for conversion.

  5. 5

    Create the open-hours broadcast format

    We design a short broadcast for telling opted-in buyers about spare lathe hours. Only those who agreed receive it. You approve the wording each time, and every send is logged. If no one has opted in, we start the list first.

  6. 6

    Log chats to the tracker and read the result

    We set labels and a rule that each chat with a drawing is entered in the tracker with its source. Later we compare labelled chats with quotes sent. You tell us which chats led to orders, and the replies and list are trimmed to match.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is the Business app enough for a turning shop, or is the API needed?
A shop with one or two people replying can use the Business app. When several people answer, or messages must link to a CRM, a provider on the official API is needed. Compare providers' current pricing and Indian support before choosing.
Can we message buyers who gave a card at an exhibition?
Ask first. A short message that names where you met and asks permission to send capability updates is fair. Keep a record of the yes. Read the platform's present terms before broadcasting to exhibition contacts.
Should drawings be shared on WhatsApp at all?
Some buyers prefer it and some prefer email for confidential drawings. Agree the route with each buyer, and log the drawing against the quote whichever way it arrives.
Is sharing a drawing on WhatsApp a confidentiality risk for a turning shop?
It can be if a buyer's terms forbid it. Check the buyer's confidentiality terms first, keep each buyer's files in that buyer's chat only, and move to email when the buyer asks. Never forward a drawing to another contact.
Do drawings sent on WhatsApp put customer confidentiality at risk?
It can be, depending on the customer. Some buyers send drawings on WhatsApp themselves, but some contracts forbid forwarding or storing them outside agreed systems. We write your rule into the saved replies: what the estimator may send back and what must go by email or portal. Check with your own adviser if a contract includes a confidentiality clause, and ask the buyer which route they prefer.
Can the shop send open lathe hours to every contact?
No, only to people who agreed to hear from you. A broadcast to everyone damages the number and may lead to blocks. We build the list from buyers who messaged first or asked for updates, and we note when and how each agreed. Every broadcast carries a simple way to stop. Check the platform's current rules on business messages before the first send. Each broadcast is shown to you before it leaves, and every recipient is recorded in the tracker.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.