Skip to content
GullySales

Commercial refrigeration companies · Referral marketing

Get the next cold room order from the people who already trust you.

Referral marketing for a commercial refrigeration company is the work of asking and thanking the people who send you buyers: past customers, contractors, equipment dealers and your own technicians. GullySales sets up the asking, the thanking and the record of who sent whom.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A technician demonstrates a commercial cold room

What referral marketing means

Referral marketing is asking an existing customer to recommend you to someone they know, usually with a reward for both sides. It differs from a loyalty scheme because it brings in a new customer rather than a repeat purchase. GullySales builds the ask and the reward into a point where a customer is already satisfied.

Last updated 14 Nov 2026.

For commercial refrigeration companies

Where it usually goes wrong, and what we would do.

  • “Referrals are never asked for”

    A dairy owner is happy with the milk cooler and would tell a neighbour, but nobody gives the owner the reason or the means.

  • “Contractors recommend whoever answers”

    A civil contractor picks a refrigeration firm for a project, and the one that replied first with a clear note gets the call.

  • “Nobody records where the order came from”

    A big order is put down to walk-in or luck, so the relationship that produced it is never thanked.

What we do

What we deliver for commercial refrigeration companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A list of likely referrers

    Customers, contractors, architects, dealers and consultants who meet your buyers, ranked by how frequently they come across a need.

    Result: You know who to ask.

  2. A one-page introduction note

    A short note about what you build, the size of site you serve and how to reach you.

    Result: The referrer has something to forward.

  3. A thank-you routine

    A call, a visit or a note when a referral becomes a customer, within what is proper for each person.

    Result: Referrers feel remembered.

  4. Source field in every enquiry

    A referrer name against each enquiry and order in the record.

    Result: You can see which relationships bring orders.

  5. A site visit invitation

    An offer for a satisfied customer to host an interested buyer at their working installation, if they are willing.

    Result: A new buyer sees the real thing.

  6. A rule for what you do not do

    Clear instructions on what not to promise, offer or ask for.

    Result: The programme does not damage trust.

How the result is measured

  • Referrals received
  • Referral conversion rate
  • Cost per referred customer

Recorded as a baseline before work starts, so every later report has an honest comparison.

How referrals work in this trade

Referrals here come from a handful of sources, and each needs a different kind of ask.

Past customers with working installations
Ask the owner whose cold room has run well to introduce one friend in the same trade. Offer to hold a short site visit, and record the name on the enquiry.
Civil and electrical contractors
They are asked for a refrigeration supplier on hotel, hospital and warehouse projects. Give them a one-page note, a drawing format and a prompt reply so they trust you with their client.
Equipment dealers and kitchen planners
They sell the kitchen and need a cold room partner. Agree who quotes and who services, in writing, before the first job so no customer is confused.
Bank and NBFC loan officers
They need a quotation, drawing and specification to process equipment loans. Supply a clean pack and check the bank's current requirements, without promising any approval.
Technicians and service staff
They see what customers are planning. Ask them to note an upcoming need on the visit report, and thank them for leads that become orders.
What never to do
Do not promise kickbacks to a consultant or a purchase officer, pay a customer's employee for an order or pressure a buyer to refer. Keep every payment on the invoice, visible to the owner.

Who it is for

This is written for these commercial refrigeration companies.

  • Cold room and walk-in cooler builders
  • Display chillers, visi coolers and deep freezer makers
  • Ice plant and ice cube machine suppliers
  • Blast freezer and processing line refrigeration contractors
  • Bulk milk cooler and dairy refrigeration firms
  • Supermarket and cold chain retail refrigeration firms
  • Refrigeration service and AMC companies
  • Banana ripening chamber and controlled atmosphere builders

Before you decide

When this may not be the right fit.

  • Your last few installations have open complaints on cooling or service, and asking those owners to recommend you would invite a hard answer
  • You do not yet record where each order came from, so you could not tell a referral from a walk-in

Before you decide

Agree the work. Know how to judge it.

Referral marketing for commercial refrigeration companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review repeat orders, inactive customers, and reasons for leaving. Separate a normal buying interval from a customer who stopped because of an unresolved problem.

Make the scope clear

Choose the customer group and the reason to contact them. Agree how complaints, renewal decisions, and additional offers are handled, including when a sales message is inappropriate.

Check the work in use

Track the response through to a retained or repeat order, with discounts and service costs visible. Record why the customer returned rather than crediting every repeat purchase to the campaign.

Know when to change course

If customers leave because delivery is unreliable, fix that before offering a loyalty reward. Repeated promotions can hide the cause without improving the experience.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial refrigeration companies. Anything missing is noted in the written scope, with who will supply it.

The list of contractors who build cold stores
Names of civil, electrical and interior contractors who work on sites needing cold rooms are your highest-value referrers. Names on paper are acceptable. Without them, the first group is made only from customers, and the people who meet the buyer before you do are missed.
A record of orders and their sources
Even rough notes on where past orders came from will do. A sheet with customer names and a source column is acceptable. If nothing exists, we reconstruct a few from memory with the engineers, and the starting position is marked as an estimate.
A decision about thanks and gifts
Decide whether you thank referrers with words, with a visit or with a small gift, and set the limit. A plain sentence from the proprietor is acceptable. Without a decision, thanks vary by person, and a referrer who was thanked less than another may stop sending buyers.
A customer willing to host a visit
One customer who agrees to let a prospect see a running cold room is worth more than a brochure. Verbal agreement is acceptable. Without a host, the introduction note offers only photographs, and a buyer who wants to see the room has nothing to see.
Names of customers who stayed for years
Long-standing customers who renewed their annual contract again and again are natural referrers, because they have seen your service over a long time. A list of five to ten names from the coordinator is acceptable. Without it, the first group of people we approach is made only of contractors, and the customers who can speak with the greatest credibility are left out of the plan.

How it works

How the referral marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List who has already sent you an order

    We go through your orders and ask the proprietor and the engineers where each came from. Contractors, consultants, dealers, bank officers and satisfied customers are all noted. You tell us whom you trust and whom you would rather not encourage. This becomes the first referrer list.

  2. 2

    Record the starting position for introductions

    Before any asking begins, we count how many enquiries in the last year were introductions, and from whom, using the enquiry sheet and your memory. Where it was not recorded, we say so. These figures are the point against which any change in referrals is later compared.

  3. 3

    Choose the first ten people to ask

    Together we choose the first group: a civil contractor who builds cold stores, an electrical contractor, two long-standing customers and a dealer. For each we write one line on why they would introduce you. The proprietor decides who is approached personally and who gets a message.

  4. 4

    Write the introduction note and the thank-you

    We draft a short note a referrer can forward, saying what you do, which sites you serve and how to reach you. We also write the thanks you send when an introduction is received, whether or not it becomes an order. You approve every word, and no cash or gift is attached unless you have decided it.

  5. 5

    Test the source field with one referrer

    The enquiry record gets a field for who introduced the buyer. We test it with one friendly contractor: they pass a name, your coordinator records it and the thanks is sent. Any step that is forgotten shows up in this small test, before the routine is repeated with the others.

  6. 6

    Review the introductions after the first asks

    After the first group has been approached, we count introductions received, quotations from them and orders, and compare these with the starting position. The proprietor tells us what the referrers said. We decide whether to widen the list or to improve what we ask.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 7, after the sale. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we pay customers for referrals?
A thank-you gift is fine, but a cash payment can create a conflict, particularly with employees of the buyer who may not be allowed to accept it. Ask your CA about the tax treatment, and prefer a service credit or a thank-you visit.
How do we know who sent a customer?
Ask at the first enquiry, every time, and write the name down. If the buyer says a friend, ask which friend. Add a source field to your sheet so referrers show up in the report.
Can we ask a contractor to recommend us?
Yes, and it is normal. Make the ask specific: tell them the project type you want, the size you can handle and the information you need. Be clear about how you will work with their client, and who handles which part.
How often can we ask a customer to refer someone?
Once after a good moment, such as a smooth handover or a fixed fault, and again only when something new happens. Repeated requests make a customer feel used. Ask at moments of success.
What should the thank-you contain when an introduction does not become an order?
It should thank the referrer for the introduction and tell them, in a sentence, what happened, without sharing the buyer's private details. A referrer who hears nothing assumes you ignored the buyer or lost the order, and may send no more. Say that you visited, quoted or could not help, and that you are grateful for the trust. If the buyer asked you to keep a quotation private, say only that the enquiry was handled. Keep the same courtesy whether the order was large or small, because the referrer judges you by how you treated the person they sent.
Can we ask our own technicians to bring in leads?
Yes, because technicians meet the next buyer at the customer's site: the neighbouring shop, the next plot, the manager who has a similar fault. Ask them to pass a name and a phone number to the coordinator, not to quote on the spot. Record the technician as the source and thank them in front of the team, in the way you have already decided. If you offer a reward, set the rule in advance and apply it to everyone. Check with your adviser if the reward is money, so that it is handled correctly in your accounts.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.