Skip to content
GullySales

Commercial refrigeration companies · Sales process

Turn a site visit and a quotation into an order, one step at a time.

A sales process for a commercial refrigeration company is the set of steps from the first enquiry to the handover of an installed room, with a named person and a record at each step. GullySales writes the steps in your trade's words and trains the team to follow them.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A technician demonstrates a commercial cold room

What sales process means

A sales process is the fixed sequence of steps, such as enquiry, site visit, quote and order, that every deal is expected to pass through in the same order. GullySales writes this sequence down for your business and checks that every salesperson actually follows it.

Plan the next part of the work

Last updated 21 Nov 2026.

For commercial refrigeration companies

Where it usually goes wrong, and what we would do.

  • “The quote goes out before the need is understood”

    A price for a ten by ten room is wrong if the buyer actually stores twice the stock, and the buyer goes elsewhere.

  • “The visit is one engineer's opinion”

    Without a checklist, each visit covers different things, and the quotation misses power, access or drainage.

  • “The handover ends the relationship”

    After the commissioning the invoice is sent and nobody explains how to use the room, so the first fault is blamed on you.

What we do

What we deliver for commercial refrigeration companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A written sale from enquiry to handover

    Each step named, who does it and what must be recorded before moving on.

    Result: The team sells the same way each time.

  2. A site visit checklist

    Size, power, access, floor, drainage, load, temperature range and the buyer's time frame.

    Result: The quotation starts from facts.

  3. Quotation and follow-up rules

    The format, who approves it and the dates for calling the buyer back.

    Result: No quotation is left unanswered.

  4. Objection answers

    Short, honest replies on price, brand, warranty and a competitor's lower rate.

    Result: The team handles comparison calmly.

  5. Handover and first-service routine

    A walk-through with the customer, a written guide and a scheduled first check.

    Result: The relationship continues after commissioning.

  6. Win and loss notes

    A reason recorded for every order won and every one lost.

    Result: You learn why buyers choose or leave.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

These are the steps a cold room or chiller order goes through, written the way the trade says them.

Enquiry
Take the name, site, equipment and need, and note the source. Reply the same day with the questions you need answered, not with a price.
Site visit and survey
Measure the space, check power and access, and ask what will be stored, how much and at what temperature. Record the answers and photos.
Quotation
Send a drawing or sketch, the specification and a price that shows what is included. Record the version, the amount and who will decide.
Follow-up and comparison
Call after the buyer has had time to read it. Ask what the buyer is comparing and offer to explain the differences; record what they say.
Order and advance
Confirm the specification, the payment terms and the date in writing. Record who signed and the advance received.
Installation and handover
Commission the unit, show the customer the controls, explain what to avoid and record the first service date.

Who it is for

This is written for these commercial refrigeration companies.

  • Cold room and walk-in cooler builders
  • Display chillers, visi coolers and deep freezer makers
  • Ice plant and ice cube machine suppliers
  • Blast freezer and processing line refrigeration contractors
  • Bulk milk cooler and dairy refrigeration firms
  • Supermarket and cold chain retail refrigeration firms
  • Refrigeration service and AMC companies
  • Banana ripening chamber and controlled atmosphere builders

Before you decide

When this may not be the right fit.

  • You quote the same standard display chiller from stock and the sale is closed at the counter, so a staged process adds steps nobody needs
  • The engineer who visits sites has no authority to discuss scope or price, so the steps would stall at the first handover

Before you decide

Agree the work. Know how to judge it.

Sales process for commercial refrigeration companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial refrigeration companies. Anything missing is noted in the written scope, with who will supply it.

Three won quotations and three lost ones
Pick six real quotations, with the equipment, the price and what the buyer said afterwards. Copies are acceptable and prices stay with you. Without them, the sequence is written from general knowledge, and we cannot show your team where their own deals went wrong.
A day with the sales engineer on site
One site visit with the engineer with the greatest number of quotations needs to be set aside for us. Any ordinary visit is acceptable. Without it, the checklist is written from how engineers say they work, which differs from what they do under pressure at a customer's premises.
Your standard terms and payment stages
The usual payment stages, warranty terms and what the quotation includes must be known to us. A printed sample is acceptable. If they differ by customer, tell us the rule. Without it, the quotation rule cannot be written and each engineer continues to quote on a different footing.
The owner's rule for discounts
Decide who may offer a reduced price and up to what point before approval. A simple rule on paper is acceptable. If nothing is decided, the sequence will include a step where every discount goes to the proprietor, which slows the sale and tires everyone.
The people who will follow the sequence
List the sales engineers, the coordinator and any partner who quotes. A short name list is acceptable. Without the list, training reaches whoever happens to be in the office, and the engineer with the greatest number of quotations is the one who is missed.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sit in on a site visit

    We go with your sales engineer to a real site visit and, if possible, to the meeting where the quotation is discussed. We note what is asked, what is measured, what the buyer says about the budget and who else appears. This shows how a sale actually runs in your firm today, before we write anything.

  2. 2

    Write the sequence in your own trade's words

    From those visits and from your won and lost quotations, we draft the sequence: first call, qualifying questions, site visit, drawing, quotation, follow-up, order, installation and handover. Each step gets a name, an owner and the single record that proves it happened. The proprietor corrects the draft until it matches how you want to work.

  3. 3

    Build the checklist the engineer carries on site

    With your senior engineer, we turn the site visit into a one-page checklist: the product stored, the room dimensions, the power supply, the door position, access for the panels and the questions on the budget. The engineer tries it on a live visit and tells us what is missing. We revise until it is used without being told.

  4. 4

    Agree what a quotation must contain before it leaves

    We write the rule for what goes in the quotation: the equipment named, what is included and left out, the payment stages, and the next date. A second person reads it before it is sent. The proprietor decides which quotations need approval and which the engineer may send alone.

  5. 5

    Train the team using your own lost quotations

    We run a session with the sales engineers and the coordinator using three quotations you lost and one you won. Each person walks it through the sequence and says where a different step would have changed the conversation. The objection answers are rehearsed in your own words and kept short.

  6. 6

    Compare sales with the starting record

    After the team has used the sequence for a spell, we compare the visits made, quotations sent, orders and the reasons for losses with the figures we took before. The proprietor and the engineers tell us which steps they skip. We decide whether to simplify the step or insist on it.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should do which step?
The salesperson or owner handles enquiry, quotation and follow-up, while an engineer does the survey and handover. Write down who owns each step so a quotation does not wait on someone else's diary.
When should we send the quotation?
After the survey, not before. A price given on a phone call is a guess, and an incorrect one costs you the order or the margin. Give a range if you must, and say clearly that the firm figure follows the visit.
What do we do with a buyer who only wants the lowest price?
Ask what the buyer is comparing and offer to compare line by line. If the other firm omits panel thickness or service, show it. Some buyers still choose the cheapest, and you can decline to cut the specification.
Is there a step we should add that others skip?
A written handover with a first-service date. It costs a visit, and it turns the order into the start of an AMC rather than the end of a relationship. Firms leave it out because the room is working and the invoice is paid.
Do we need to change how our engineers quote?
Only where the quotation leaves out something a buyer will ask about later. Your engineers know the equipment, so we do not change how they size a room or choose a compressor. We add the points that protect the sale: a written record of what the buyer said about the budget, a clear list of what is included and left out, and a date for the next contact. The bulk of the change is in what is recorded and when. We try the quotation rule on live jobs with your engineers, and they tell us which points slow them down before it is made standard.
How should we treat a buyer who asks for three quotations?
Treat it as normal and plan for it. A buyer comparing three firms is serious, and the work is to make your quotation easy to compare and hard to misunderstand. Offer to explain the quotation in person, state exactly what is included and what is not, and ask what the other firms have quoted for in terms of equipment, not price. Record the competitors the buyer names and the reason the order went elsewhere if it does. After several such cases, those reasons show whether you are losing on price, on response or on clarity.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.