Skip to content
GullySales

EV charging equipment manufacturers · CRM

Record each site, committee and fleet so the next call starts where the last stopped.

A CRM for a charger maker is a shared record of each site, buyer type, quote and conversation, from first enquiry to commissioning. GullySales sets up the fields, stages and rules so a society that went quiet or a fleet awaiting a trial is never lost.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For EV charging equipment manufacturers

Where it usually goes wrong, and what we would do.

  • “The buyer is a site, not a name”

    A society, a depot or a mall has a load, a parking count and a meter. Keeping those facts against the contact makes every later call sharper. A record that holds only a phone number sends the engineer back to ask the same questions.

  • “Committees need a log of the last question”

    A society meets, raises a point and meets again. If the salesperson who took the point leaves or forgets, the next call restarts the conversation. A line in the record on what was asked and promised keeps the file alive.

  • “Direct and partner routes collide”

    An installer and the maker's own team can quote the same society. Without a field for the route, the buyer receives two prices and trusts neither. The record needs to show who holds the quote.

  • “Installation and service belong in the same record”

    An order does not end the relationship. Commissioning date, warranty start and service visits matter to the next buyer asking for references. A record that stops at the sale cannot answer service questions.

What we do

What we deliver for EV charging equipment manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Fields for a charger sale

    Sanctioned load, parking count, meter distance, vehicle types, unit type and buyer type on every record.

    Result: Any salesperson can read a site without calling the contact.

  2. Stages that fit the sale

    Enquiry, site visit, quote, committee or approval, order, installation and service as separate stages.

    Result: You can see where each deal is waiting.

  3. A route field

    A required field marking direct, partner or white-label for each deal.

    Result: One buyer is never quoted by two parties unnoticed.

  4. A last-question note

    A mandatory line on the last question asked and the reply promised after each conversation.

    Result: The next person to call knows what was promised.

  5. Source and order tracing

    Enquiry source linked through quote to order, with installation status.

    Result: You can see which sources produced installed sites.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

What a charger maker should record on each site so nobody asks the buyer the same thing twice.

Site name and type
The sales engineer enters society, depot, mall, fuel station or office. It groups enquiries by buyer so marketing can see which type brings the orders.
Sanctioned load and bay count
The engineer records both after the first call or visit. It lets the quote be built without asking again and flags sites that need a utility upgrade first.
Decision chain and last question
The salesperson notes who decides and the last question raised, such as meter ownership. It tells the next caller where the committee stands.
Route to market
Mark direct, installer or operator. It stops two partners quoting the same site and shows which route closes.
Quote version and validity
The salesperson logs each quote and its expiry, since component prices move. It flags the quotes that have lapsed without a reply.
Installed units and service history
The service lead adds serial numbers and visits after commissioning. It supports warranty claims and lets you offer an extra unit to a satisfied site.

Who it is for

This is written for these EV charging equipment manufacturers.

  • AC charger makers for homes, societies and offices
  • DC fast charger makers for highways and fleets
  • Two-wheeler and three-wheeler charger makers
  • Bus and commercial fleet charging makers
  • Battery swapping station builders
  • Charger makers with their own software and app
  • White-label suppliers of chargers to operators
  • Suppliers of charging cables and connectors

Before you decide

When this may not be the right fit.

  • Engineers and sales keep separate records and neither will share them, so the CRM would hold half the story
  • You sell only through one distributor who owns the customer, and you would hold nobody's details

Before you decide

Agree the work. Know how to judge it.

CRM for EV charger makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from EV charging equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.

A list of current open deals
A sheet or notebook list of every open deal, with the site, buyer, unit and last contact. It is the first data entered. If the list is incomplete, the record starts thin, and the team will need extra time to add what is missing.
Access to your current tool
Admin access to whatever holds the leads now: a spreadsheet, a mail account, an existing CRM or a messaging export. We read it before any change. Without access, we rely on a manual entry, which carries more errors.
A service engineer at the tracing
The person who handles faults and maintenance, present when the order is traced, since service belongs in the same record. Without them the stages end at installation, and later service calls sit elsewhere.
Your rule for competing routes
A decision on who owns a lead when a direct enquiry and an installer's report arrive for the same site. We can set up either rule, but only you can choose. If undecided, the record flags the clash and a manager decides each time.
Serial numbers of installed units
A register of installed chargers with serial number, site and date of installation, if one exists. It lets the record support service. If the register is missing, we create the field and your team fills it from now on.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one order from enquiry to commissioning

    We take a recently installed site and follow it through your company: who took the enquiry, who visited, who quoted, who approved, who installed and who handles service. Your sales head and a service engineer fill the gaps. The tracing shows the points where the record is lost today, and these become the fields and stages.

  2. 2

    Fix the fields for a site and a committee

    A charger sale is made to a site, so we define fields for the site address, parking layout, supply, buyer type, committee members, quoted unit and last question asked. You decide which fields are compulsory. The fields are written in your team's words, and the list is short enough that people will fill it in.

  3. 3

    Set the stages and the route field

    We agree stages that match the sale: enquiry, site visit, quotation, committee review, trial or approval, order, installation and service. A route field records whether the lead came direct, through a dealer or through an installer. You decide who owns each stage, and the rule for a deal claimed by two routes.

  4. 4

    Load a sample of live deals in a test

    Before anyone relies on it, we load a set of current and closed deals into a test copy and check that each can be placed in a stage and found by site, committee or route. Your sales engineers try to use it on a real call. Mistakes in the fields are corrected before the live switch.

  5. 5

    Teach the team on their own deals

    We sit with each salesperson and enter their own open deals, including the note on the last question a committee asked. You tell us who may edit and who may only read. Partner installers get their own limited access if you agree. After this step the team's deals are in the record, not in notebooks.

  6. 6

    Compare the record with the old figures

    After the team has used the record, we compare enquiries, quotes, orders and lost deals with the figures kept before the change. You can see which routes bring orders and where deals stall. We then adjust stages or fields where people are skipping them. The record is judged by whether it is used, not by promises.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need new software?
Not always. If your current tool can hold these fields and stages, GullySales sets it up there. A spreadsheet is a starting point for a small team. What matters is that every site has one record and every conversation is noted.
Who should update the record?
The person who has the conversation, straight after it. A record updated by a manager from memory later loses the detail. GullySales agrees the minimum fields with your team so updating takes little effort.
Can the CRM record serial numbers of installed chargers?
Yes, as a field on the site or a linked asset list. A serial tied to a site and an install date makes warranty and service calls simpler to settle. Agree who enters it and when, so the list is not left until a fault.
How do partner installers use the CRM?
Give installers a limited view or a form that feeds their site details to you, and keep your own pricing and other partners' sites out of it. Decide who owns a buyer before the first quote, and record it.
Can the CRM warn us when a quotation has expired?
Yes. We add a field for the quotation's validity and a rule that lists any quotation past its date for the owner of the deal to review. The record only reminds; your salesperson decides whether to renew, revise or close it. Because the validity date lives in the deal, a society that came back after a long committee gap is found at once, with the price and unit it was quoted. Check with your own adviser how long a quotation should stay open given your pricing.
How do we keep a CRM from becoming a chore for the field engineers?
Keep the compulsory fields few and enter them where the work happens. We design the record so an engineer can add a site visit note from a phone in one short entry, using the words they already write, and so the manager can see the result without a request. Fields that nobody reads are removed at the test stage. Your sales head also decides which entries are checked, so the effort goes to the notes that decide deals.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.