EV charging equipment manufacturers · Lead generation
Bring in site owners who have a parking area, a meter and a reason to buy.
Lead generation for a charger maker means drawing enquiries from people who own or run a site, not from people curious about electric vehicles. GullySales works on the site questions, the buyer-type pages and the capture points that separate a society secretary or fleet manager from a casual asker.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Also for EV charging equipment manufacturers
Sales and marketing for EV charging equipment manufacturers, the overview.
Plan the next part of the work
Last updated 21 Nov 2026.
For EV charging equipment manufacturers
Where it usually goes wrong, and what we would do.
“A request for a price is not yet an enquiry”
The buyer types a unit and asks for a rate. Load, parking count and the distance to the meter come later, after two calls. A form that asks for those three facts at the start turns a price request into a site lead the sales engineer can act on.
“Each buyer type searches in different words”
A secretary looks for apartment charging, a fleet manager for depot chargers, a dealer for showroom chargers. One general page serves none of them. Lead sources need a landing point written in the words of each buyer, with its own questions.
“Operators and installers send leads too”
An electrical contractor who recommends a unit, or an operator who wants white-label supply, is a lead source that never fills a web form. These conversations arrive by call or chat, and they reach the sales team only if somebody records the source.
“Curious askers crowd the sales inbox”
Students, single-car owners and comparison shoppers write in beside real site owners. Without a first screening question, the team spends an afternoon replying to someone who has no parking bay to equip.
What we do
What we deliver for EV charging equipment manufacturers.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A site enquiry form
Questions on sanctioned load, parking count, meter distance and vehicle types, with a plain reason for each question.
Result: Every new enquiry shows whether the sender owns a site.
Buyer-type entry pages
One page each for societies, fleets, dealerships, malls and fuel stations, with its own questions and answers.
Result: Each buyer type lands on words written for its own case.
A partner and installer intake
A short route for contractors and operators to register interest, tagged separately from direct enquiries.
Result: Partner leads appear in the list with their source named.
A screening reply
A first WhatsApp and email reply that asks the site questions and invites the right people to share a location pin.
Result: The sales engineer knows which enquiries deserve a site visit.
A source log
A record of where each enquiry began, matched against quotes sent and orders won.
Result: You can read which source produced orders, not only enquiries.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
What a charger maker should record from a site enquiry to tell an owner from a curious asker.
- Sanctioned electrical load
- Ask the buyer to read it from the electricity bill and note it. It tells your engineer whether the site can power the unit or needs a load increase from the utility first.
- Number of parking bays and their layout
- Record how many vehicles will charge and where the meter room is. A society with open bays and a far meter is a different quote from a basement with a nearby panel.
- Vehicle types to be charged
- Note two-wheelers, cars, auto-rickshaws or buses. It decides the connector, the power level and whether the AC or DC unit you offer fits at all.
- Who decides and who pays
- Write down whether it is a secretary acting for a committee, a fleet head with a board, or an owner. It sets how long the decision runs and what papers to send.
- Photo and location pin of the parking
- Ask the buyer to send both on chat. It lets the sales engineer judge cable runs and mounting before a visit, and filters out those who cannot show a site.
- Source of the enquiry
- Log whether it came from a partner installer, an operator, an event or a search. It shows which route delivers site owners and which brings curiosity.
Who it is for
This is written for these EV charging equipment manufacturers.
- AC charger makers for homes, societies and offices
- DC fast charger makers for highways and fleets
- Two-wheeler and three-wheeler charger makers
- Bus and commercial fleet charging makers
- Battery swapping station builders
- Charger makers with their own software and app
- White-label suppliers of chargers to operators
- Suppliers of charging cables and connectors
Before you decide
When this may not be the right fit.
- Your team cannot visit sites or take a site survey yet, so more enquiries would only be turned away
- You have not decided which buyer type you want first, so the form would bring in requests for units you do not make
Before you decide
Agree the work. Know how to judge it.
Lead generation for EV charger makers: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from EV charging equipment manufacturers. Anything missing is noted in the written scope, with who will supply it.
- The last enquiries, with outcomes marked
- A sheet or inbox export of recent enquiries, with a note beside each saying whether it became a visit, a quote or an order. We need it to separate site owners from curious askers using your own history. If outcomes are missing, the screening questions are drafted from your engineers' memory and will need more correction later.
- A technical person for one sitting
- An engineer who knows the supply, connector and installation requirements must spend time with us on the site questions. Sales alone cannot say which answers decide a quote. If nobody technical is available, the form asks only what a salesperson can judge, and more qualifying falls to calls.
- A list of partners and installers
- Names of the contractors, dealers and channel partners who send you enquiries, with what each is allowed to quote or promise. We use it to build the partner intake and the rules for who answers whom. Without it, partner enquiries are treated like direct ones and the same buyer may be answered twice.
- Access to the form and inbox
- Admin access to the website form, the sales inbox and any enquiry sheet your team uses. Read-only access is enough for the first look; editing rights are needed at launch. Without it, we cannot test the routes, and the source log has to be filled by hand.
- Your decision on home-charger askers
- A clear owner decision on whether you reply to people who want a single charger for a house, and with what. We cannot make that business choice for you. If it is left open, the screening reply stays neutral, and your team decides each case as it arrives.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the last enquiries in your inbox
We start with the enquiries your sales engineers already received, whatever the channel: emails, call notes, WhatsApp messages and dealer forwards. We sort them into site owners, installers, students and casual askers, and mark what each person said about parking, supply and vehicles. You tell us which of them became quotes. That sorting shows which questions separate a buyer from a browser.
- 2
Agree the site questions with your engineers
Your sales engineer and a technical person sit with us and decide which questions a site owner must answer before anyone quotes: parking layout, sanctioned load, distance from the meter, number of vehicles and who pays the electricity bill. You decide which answers are compulsory and which can wait for a visit. We turn the agreed list into the wording of the enquiry form.
- 3
Build one entry page for each buyer
A society secretary, a fleet manager and a dealership owner arrive with different worries, so each gets a page that opens with their own situation and points to the same form with their own wording. You review the pages for technical errors, and we check every sentence against your certificates and datasheets. Nothing goes live until your engineer has read the page.
- 4
Set up the installer and partner intake
Electrical contractors and channel partners send enquiries on behalf of a site owner, and the form must record both the sender and the site. We add a partner route that asks who the end buyer is and whether the partner has visited. You decide which partners get direct contact with your team and which are answered through the form.
- 5
Send test enquiries through every route
Before launch, we submit enquiries as a society secretary, a fleet manager, a partner and a casual asker, and follow each one to your inbox or sheet. We check that the screening reply goes out, that the source is recorded and that your sales engineer sees the site details without a phone call. Anything that arrives incomplete is fixed before real enquiries use the route.
- 6
Compare sources with the quotes issued
Once enquiries come in, we read the source log against the quotes your team issued and the orders that followed, using the figures noted in the first step as the starting point. You see which routes brought site owners and which brought only price requests. Together we decide where to add effort and which route to drop, without assuming any result in advance.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
How do we tell a real site owner from a casual asker?
Should leads from installers be treated like direct leads?
A buyer wants only a price in the first message. What do we do?
Do we take enquiries from people who want one home charger?
Who answers an enquiry in the first place, GullySales or our team?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
What if we are not happy with the work?
More for EV charging equipment manufacturers
Related work to consider.
Closest to this: leads and follow-up
Also for EV charging equipment manufacturers
Or start from the overview: sales and marketing for EV charging equipment manufacturers.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.