Skip to content
GullySales

Granite, marble and stone processors · Follow up systems

Chase the quotation until the buyer says yes, no or not this year.

A follow-up system for a stone processor is the set of calls, sample dispatches and reminders that carry a quotation from the day it is sent to a clear answer. GullySales works on the sequence, the reminders and the notes so that a rate sent for a large project does not sit unanswered.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A supervisor shows granite and marble slabs to an architect

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For granite, marble and stone processors

Where it usually goes wrong, and what we would do.

  • “A project quotation is sent once and then forgotten”

    The salesman sends a rate for a hotel lobby floor and moves on to the next call. The buyer is waiting for a second visit or a sample, and the supplier who calls again gets to quote against a decision that is still open.

  • “The decision-maker is not the person who enquired”

    The site engineer asks for the rate, the architect picks the stone and the owner signs the cheque. A follow-up that only calls the first contact never reaches the other two, so the notes need a name for each role.

  • “A sample sent and never discussed is a wasted board”

    A sample board reaches a studio and sits on a shelf. The call that asks whether the finish matched the drawing, and whether a full slab should be reserved, is where the board turns into a lot on hold.

  • “A hold on a slab expires without anyone noticing”

    A lot promised to one buyer blocks the same slab for the next. If the hold has no date and no reminder, a good lot stays idle and a second buyer is told it is unavailable.

What we do

What we deliver for granite, marble and stone processors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A quotation stage list

    Named stages from enquiry to sample sent, quotation sent, lot on hold, order confirmed and lost, with a plain rule for moving a quotation from one to the next.

    Result: Every open quotation sits at a stage anyone can read.

  2. A next-call date on every record

    A rule that no enquiry is closed without a dated next action, whether a call, a second sample or a visit to the yard.

    Result: No open quotation is left without a date for the next contact.

  3. Call notes by role

    A note format that records who enquired, who specifies the stone and who approves payment, with the last thing each said.

    Result: The next call speaks to the right person about the right worry.

  4. Sample follow-up script

    A short call plan for the days after a board or tile is dispatched: did it arrive, does the finish suit the drawing, should a slab be reserved.

    Result: Each sample leads to a conversation, not a silence.

  5. Hold and release list for slabs

    A sheet showing which lots are held for which buyer and until when, with a reminder to the salesman before the hold lapses.

    Result: A held lot is either confirmed or released on a known date.

  6. Lost-order reasons

    A short list of reasons recorded when a quotation is lost, such as rate, finish, delivery or another supplier.

    Result: You can read why orders went elsewhere across a season.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Log the moments after a quotation that decide whether a buyer says yes.

Quotation with lot and size
Record the stone, lot, size and rate in the same message that carries the quotation. A buyer comparing yards needs details that cannot be mistaken for another lot.
Decision-maker's name and role
Note whether the contact is the architect, the contractor or the owner. The person who asked for the rate may not be the one who approves the purchase.
Sample sent and its follow-up
Record the date a sample board went out and who received it. A sample that nobody discusses is a cost, and a call about it reopens the talk.
Slab hold and its expiry
Record who a slab is being held for and until when. A hold that lapses unnoticed sells to someone else, and the buyer hears it from the yard.
Reason for a lost quotation
Note price, shade, delivery or a rival's lot. Over time this shows whether to change the rate, the stock or the way the quotation is sent.

Who it is for

This is written for these granite, marble and stone processors.

  • Granite slab and tile processors
  • Marble processors and cutters
  • Kota stone, sandstone and limestone producers
  • Quartz and engineered stone fabricators
  • Countertop, kitchen and vanity fabricators
  • Monument, memorial and temple stone workshops
  • Stone craft, statue and carving units
  • Cobble, paving and garden stone suppliers
  • Block traders and quarry-linked processors
  • Export-oriented stone processors

Before you decide

When this may not be the right fit.

  • Salesmen keep all their notes in personal phones and will not share them, so a follow-up list would hold only what the owner saw.
  • Your slabs are not reserved for anyone, so a message promising a hold would sell the same piece twice.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for stone processors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from granite, marble and stone processors. Anything missing is noted in the written scope, with who will supply it.

Quotations from the last season
The sent quotations with date, buyer and stone. A photographed notebook is enough. They give us the baseline of quiet quotations. Without them, we start counting from today.
A list of slabs currently on hold
Every slab or lot held for a buyer, with the date placed. This is the first set of reminders. When there is no list, the first task of the routine is to make one.
Sample boards sent and not discussed
A list of samples that left the yard and were never followed up. Each is a call waiting to be made. With no list, the sample routine begins with the next board sent.
A person responsible for each quotation
The salesperson's name against every open quotation. Quotations without an owner are the ones that vanish. If ownership is unclear, the owner assigns them before we begin.
Your limit on follow-up calls
The owner decides how many times a buyer is contacted before the quotation is marked as quiet. This is a judgement about your buyers and cannot be set by us.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count the quotations that went quiet

    We open the quotation notebooks and the messages with your sales head and count the quotations sent in the last season that nobody followed up. We note the stone, the buyer type and the last contact. You agree the count. That figure is the baseline against which the new routine is judged later.

  2. 2

    Decide when a quotation counts as closed

    We write down the endings a quotation can have: ordered, lost to a rival, project postponed, no answer. You decide which of these needs a reason written down. Each has a plain name your team will use, so that a quotation is never just left open.

  3. 3

    Write the follow-up questions by role

    We draft the questions for the next call, matched to who is on the line: the architect who chose the stone, the contractor who signs the order, the purchase head who sets the rate. Your salespeople test them on a real call and say which ones sound forced. We shorten them until they feel natural.

  4. 4

    Set the sample and slab-hold reminders

    We add a reminder to ask about a sample board a few days after it leaves, and a reminder before a slab hold expires. You decide how long a hold lasts. The person who placed the hold is the person the reminder reaches, so it cannot belong to nobody.

  5. 5

    Run the routine with the team for real quotations

    The team follows the routine on live quotations while we watch the record. Where a reminder is ignored, we ask why, and change the reminder or the person. You attend the first review and decide whether to drop any step that costs more time than it earns.

  6. 6

    Compare lost-order reasons with the first count

    We set the quotations closed under the new routine against the quiet ones counted at the start, and read the reasons recorded for those lost. You see how many reached a decision and why buyers went elsewhere. You decide what to change in price, sample or speed of reply.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many times should we call after sending a quotation?
There is no fixed number. Call until the buyer gives a clear answer or a date to decide, then call on that date. Each call should carry something new, such as a sample, a photograph of the lot or a delivery plan.
Will repeated calls annoy architects?
Calls annoy when they only ask 'any update?'. A call that brings a new photograph, answers a question on finish or confirms a lot is available is useful to a specifier, and they remember the supplier who made it easy.
Our salesmen keep notes in their own phones. What is wrong with that?
When a salesman leaves or is away, the quotation and the history leave too. Keep every note in one shared sheet or CRM so another person can pick up the call with full context.
How do we manage a slab hold that is about to expire?
Record the expiry date beside the hold and call the buyer before it lapses, offering to extend or release. A hold that lapses unnoticed sells to someone else, and the buyer hears it from the yard. Releasing it openly protects the relationship.
What should a salesperson say when the architect asks for a better rate?
They should note the request, ask what the architect is comparing against, and bring the question to the owner or sales head, who decides on the discount. The follow-up record notes the comparison. A reply that only repeats the old rate ends the conversation, while one that asks about the rival's stone and lot keeps it open.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.