Heat treatment companies · Website
Build a site that answers a metallurgist's first questions before they call.
A website for a heat treater is the place where a buyer checks your treatments, furnaces and testing before sending a part. GullySales works on the structure, wording and enquiry form so the site holds the facts an engineer and a purchase manager look for.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Also for heat treatment companies
- SEO for heat treatment companies
- Local SEO for heat treatment shops
- Lead generation for heat treatment companies
- Social media for heat treatment companies
- Content marketing for heat treatment companies
- Buyer personas for heat treatment companies
- CRM for heat treatment companies
- Follow-up systems for heat treatment companies
Sales and marketing for heat treatment companies, the overview.
Last updated 14 Nov 2026.
For heat treatment companies
Where it usually goes wrong, and what we would do.
“A buyer checks the site before the first call”
A quality engineer who has heard your name opens the site to confirm furnaces and testing. If the facts are missing, the engineer assumes the shop is basic and the call does not happen.
“A brochure site hides the details”
Pages full of general claims about quality and experience tell a metallurgist nothing. Steel grades, section limits, furnace types and the checks you run are what they read for.
“The form is too thin or too heavy”
A form with only name and phone brings vague calls. One that demands a long technical sheet is abandoned. The right middle asks for grade, hardness target and quantity.
“Old pages contradict the current shop”
A site that lists a furnace you sold or omits a new vacuum unit misleads buyers. Nobody owns updates, so the site drifts from the shop floor.
What we do
What we deliver for heat treatment companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A site structure by treatment
A home page, a page for each treatment, a furnace and testing page, part-family notes and a contact page.
Result: A buyer reaches the treatment they need in one step.
A furnace and testing page
A clear listing of furnaces, load limits, quench media, testers and lab links, checked with your supervisor.
Result: The page an engineer opens first.
A trade-specific enquiry form
Fields for grade, target hardness, section, quantity and distortion concerns, linked to the register.
Result: Enquiries arrive ready to quote.
Mobile and speed checks
Testing on a phone with tap-to-call and WhatsApp buttons.
Result: A shop-floor visitor can reach you in one tap.
An update owner and routine
A named person responsible for changes to furnaces, treatments and contacts.
Result: The site matches the shop.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
What engineers type before landing on a heat treater's site, and the page they need.
- [shop name] furnaces and testing
- The furnace and testing page: furnace types, load limits, quench media, testers and the report supplied with a lot.
- gas nitriding job work
- A treatment page with grades, case depth ranges, surface hardness read and the enquiry form fields for it.
- heat treatment shop contact
- A contact page with the estate, gate description, tap-to-call and a WhatsApp button, checked on a phone.
- how to send a die for hardening
- A page explaining the details to send, how pickup works and what a quote needs, so the first call is short.
- vendor approval documents heat treatment
- A downloadable vendor pack listing furnaces, tests, sample reports and certificate formats, for a quality engineer to file.
- heat treatment for gear blanks
- A part-family page naming the carburising route, the case depth checks and the typical blank sizes handled.
Who it is for
This is written for these heat treatment companies.
- Hardening and tempering shops for tools, dies and moulds
- Case hardening and carburising for gears and shafts
- Nitriding and surface hardening units
- Vacuum heat treatment providers
- Induction hardening specialists
- Annealing and stress relieving for fabricators and castings
- Heat treatment for forgings and fasteners
- In-house heat treatment units that take outside work
Before you decide
When this may not be the right fit.
- Your furnaces and test equipment are changing, and a page would be wrong within the year.
- Nobody has been named to update the site, and a furnace page would drift from the shop floor.
- You have not decided whether to show rates, names or drawings, and the pages would stall on those choices.
Before you decide
Agree the work. Know how to judge it.
Website for heat treatment companies: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from heat treatment companies. Anything missing is noted in the written scope, with who will supply it.
- Domain and hosting logins
- Bring the registrar and hosting details through a safe route. If a former developer holds them, say so early. Without them we cannot launch the new site or redirect old addresses, and buyers who saved the old link meet an error page.
- Furnace and testing details
- Provide the list of furnaces with sizes and load limits, and the tests carried out on site. A plant sheet will do. Without it, the furnace page repeats generic text, which gives a buyer no reason to prefer your shop over the next one in the search results.
- Photographs of furnaces and the test room
- Take clear pictures of the bay, furnaces, loading area and test room, with no customer part, marking or drawing visible. A phone camera is acceptable. Without them the site shows stock images that tell a buyer nothing.
- A decision on rates and customer names
- Decide whether the site shows rates, ranges or none, and whether any customer is named. Only you can decide, and a customer's permission is needed for a name. Without a decision, we show neither, and the page invites a buyer to send the drawing for a quotation, which is the usual way a trade of this kind prices.
- A named person to keep the site current
- Choose who tells us or updates the site when a furnace is added or a process stops. If nobody is named, old pages again contradict the shop, and a buyer who arrives for a process you have stopped offering leaves with a poor view of the rest.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the current site as a purchase manager
We open the site on a phone and a computer as a buyer checking a new vendor would, and note what is missing: the processes, the furnace sizes, the tests, a clear way to send a drawing. You tell us what is out of date, such as a furnace that was sold or a test that is now done elsewhere. The scope that follows is based on that reading, and a page that cannot be made true is removed and not repaired.
- 2
Collect the furnace and testing facts
A brochure site hides the details a buyer wants. With the plant head we gather the furnace types, load limits, processes and tests, and a photograph of each area. You approve what is stated about capacity. The pages carry only what is true.
- 3
Draw the structure by treatment
The site is laid out by treatment, such as hardening and tempering, case hardening, nitriding, annealing and vacuum treatment, with a furnace and testing page and a contact page. You decide which treatments to show. We remove old pages that contradict the shop as it is now, and redirect their addresses to the nearest current page, so that a link from an old directory still lands on a working page.
- 4
Design the enquiry form for a drawing
The form is neither too thin nor too heavy. It asks for the part drawing or photograph, steel grade, weight, process and hardness or case depth, and whether a report is needed, and it accepts a photograph taken on a phone. We test it with sample enquiries from a tool room and a forge. You name who reads each one and who covers when that person is away, so no drawing sits unread.
- 5
Test on a phone and a slow connection
We read each page on a small phone and a slow connection, check the call button, the form and the speed, and correct what fails. You review a private test site before launch and mark what is wrong, from an unclear sentence to a button that is hard to press with a glove. We also check that the page says what a buyer should send, and that the form confirms receipt.
- 6
Hand over an update routine
After launch we agree who updates the site and when a page is checked against the shop, so that a page never describes a furnace the shop no longer has, such as after a new furnace or a new test. We compare visits and enquiries with the figures from the old site, treatment by treatment, and you decide which page to extend next. We promise no increase in either.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Can the old site be repaired, or must we start again?
Should the site show our rates?
Can we show customer names?
Should the site show our rates?
Can we show customer names?
Should the site display certifications we hold?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for heat treatment companies
Related work to consider.
Closest to this: search and visibility
Also for heat treatment companies
Or start from the overview: sales and marketing for heat treatment companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.