Heat treatment companies · Manufacturing
Your furnace records are the first thing a metallurgist asks to see.
A tool room owner has made a set of dies in alloy tool steel and needs them hardened to a stated range this week. A crack or distortion on a die that took a month to make is not affordable.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

In one paragraph
Heat treatment companies harden, temper, anneal, carburise or nitride metal parts in furnaces to give them the strength and hardness a drawing asks for. Marketing makes you the name that tool rooms, forges and component makers find. Sales turns a hardness specification into an approved furnace load, a test report and, once approved, repeat lots.
The owner calls a heat treater who has done similar steels, asks about furnace type and quench, and hands over the dies to the shop whose earlier lots came back straight and in range. Heat treatment is judged on what cannot be seen from outside: a part that cracks in service, a case that is too shallow, a batch with uneven hardness. Buyers therefore ask who else you treat for, what furnaces you run and what hardness and case depth records you provide. A shop that states its furnaces, steels and records openly gives the buyer something to weigh against a rate per kilogram.
Last updated 14 Nov 2026.
How buyers decide
How heat treatment companies are chosen.
Buyers are tool room owners, forge and fastener makers, machine shops and gear and shaft manufacturers. They find heat treaters by asking peers, searching by process and place, and returning to the shop that did the last good lot. They ask which processes are offered, such as hardening and tempering, case hardening, nitriding, annealing, stress relieving or vacuum treatment, the furnace sizes and load limits, and how long a lot sits in the queue.
Quality-conscious buyers add testing to the list: hardness, case depth, microstructure checks and certificates of treatment. In-house hardness testers and links to a metallurgical lab count for a lot. Auto and engineering OEMs ask for a trial lot and a visit before approving a vendor.
Once a shop proves it can hold hardness and avoid distortion on a customer's parts, the buyer sends the next lot to the same furnace. One failed batch can end that, which is why the buyer asks for records first.
The problem
What usually goes wrong for heat treatment companies.
Common situations to check against your own enquiry records.
“We are known only to a few tool rooms nearby”
Our work is steady but small, and we have no way of reaching forges, gear makers or auto suppliers who need larger lots.
“Buyers decide on price per kilogram”
They do not see the difference between a well-controlled furnace and a basic one until a part fails.
“We cannot easily show our testing”
Hardness checks, case depth records and certificates are done well but are not presented to a buyer who is comparing shops.
“Enquiries come with just a steel grade and a weight”
Missing details such as target hardness, section size and distortion limits make quoting uncertain.
“Vendor approval takes long and we hear nothing”
A trial lot goes in, a report comes back and the engineer never calls to confirm the next step.
“Furnace time is lumpy”
Some weeks the furnaces are full and in others they sit idle, because our customers' work arrives in bursts.
What we do
What we do for heat treatment companies.
Possible deliverables for heat treatment companies. Your written scope confirms what is included.
A page for each treatment
Pages for hardening, case hardening, nitriding, annealing, induction hardening and vacuum treatment, each listing the steel grades, section sizes and furnace types handled.
A furnace and testing sheet
A one-page sheet that lists your furnaces, load limits, quench media, hardness testers and links to an outside lab, prepared with your furnace supervisor.
A form that collects what the quote needs
Fields for steel grade, target hardness, section thickness, quantity and distortion concerns, with a WhatsApp template for the same.
Case notes on part families
Descriptions of dies, shafts, gears or fasteners, the treatment applied and what was checked, without naming customers who have not agreed.
Trial lot and approval tracker
A record of trial lots with test results and a note of who at the customer is waiting on what.
Local search and marketplace presence
A maintained Google Business Profile and IndiaMART listing for each treatment you offer.
How the result is measured
- Enquiries by source and treatment
- Enquiries with grade and hardness stated
- Trial lots started against regular lots won
- Share of furnace load from regular customers
- Repeat orders from approved parts
- Furnace loads by treatment type and by customer
Recorded as a baseline before work starts, so every later report has an honest comparison.
Every service, written for heat treatment companies
Each has its own page: what it involves for heat treatment companies, what you get, and what it is measured on.
- Lead generationBring in lots whose steel, hardness and section size suit your furnaces.
- SEOBe the shop a buyer finds when searching for a treatment by name.
- Local SEOAppear when a nearby tool room searches for hardening close to the shop.
- Social mediaShow the furnace floor and the checks, and let engineers see how you work.
- Content marketingWrite guides a metallurgist would send to a purchase manager.
- Buyer personasKnow who decides, who tests and who pays before you quote a lot.
- CRMKeep every enquiry, trial lot and repeat order in one record per customer.
- Follow-up systemsCall the engineer back after the trial lot, before the next shop does.
- WhatsAppHandle lot enquiries, drawings and test reports on the app your buyers already use.
- Digital marketingDecide which online channels deserve a furnace owner's time and which do not.
- WebsiteBuild a site that answers a metallurgist's first questions before they call.
- Sales processSales process for heat treatment companies defines the evidence for each next step.
- Sales managementSales management for heat treatment companies gives every open enquiry a responsible owner.
- Sales strategySales strategy for heat treatment companies starts with choosing which opportunities to pursue.
Worth a page and a campaign of their own
Hardening and tempering of tool steels · Case hardening and carburising · Nitriding for wear resistance · Vacuum hardening for distortion-sensitive parts · Induction hardening of shafts and gears · Annealing and stress relieving · Hardness and case depth reports · Trial lots for vendor approval · Pickup, loading and delivery for regular lots
Priority campaigns
Campaigns for what heat treatment companies most want to sell.
Each one planned around when your buyers decide, and measured against the baseline.
Tool room and die maker campaign
Search ads and a page for hardening tool steels and dies, written for tool room owners and aimed at your region.
Gear and shaft maker outreach
A note about carburising, induction hardening and distortion control to gear, shaft and transmission part makers.
Fabricator stress relieving campaign
A page and message for fabricators and pressure part makers about annealing and stress relieving of welded assemblies.
Nitriding awareness campaign
A short explainer and sample report for makers of moulds, extrusion tooling and wear parts.
Quiet furnace week outreach
A WhatsApp message to regular customers when a furnace has space, offering a loading slot.
Beyond search
Where we reach buyers of heat treatment companies, beyond Google.
Search matters, but it is rarely the only way this industry's buyers find a supplier.
Tool rooms and die and mould makers
A die that took a month to cut is sent to the shop the owner trusts. The introduction carries your furnace and testing sheet, and goes to the tool room owner.
Forges and fastener makers
Forged and fastener parts arrive in lots of thousands, which suits a batch furnace. Outreach goes to the production head who books the treatment.
Gear, shaft and auto component makers
For a gear or shaft the questions are case depth and how much the part moves in the quench. The pitch answers those two with your records.
Machine shops
A job-work machine shop with no furnace of its own sends every hardened part out. It wants one dependable shop and a quick way to ask whether a grade can be handled.
Fabricators and foundries
Welded frames and castings need stress relieving before machining so they hold size. The note speaks to the fabrication or foundry manager in those terms.
Why GullySales
Heat treatment companies need one firm that follows a trial lot to the regular furnace load.
A heat treater is choosing between a firm that brings enquiries and one that also builds what happens when a trial lot arrives at the furnace gate. GullySales treats the enquiry, the trial and the regular order as one chain, so the work does not stop at a phone call.
From the trial lot to the regular load
A tool room or fastener maker sends a small trial lot first, and a failed batch ends the relationship. The firm that brings the enquiry also builds how it is answered, how the trial lot is quoted and booked, and how an approved part becomes the next repeat order on your furnace.
Starting from grade, hardness and distortion
Your plan begins with what the buyer checks: grade, hardness, case depth, certificate of treatment and whether the parts come back straight. Tool room owners, machine shops and gear makers ask peers and search by treatment. Your pages answer those questions in that order, not with a generic list.
Counted in furnace loads and repeat lots
Before work begins your present enquiries, trial lots and loads by treatment type and customer are written down in your own counts. We then read the result against them: enquiries with grade and hardness stated, trial lots against regular lots won, and the share of furnace load from regular customers.
A written scope and no promised load
The scope, the fee and the pages to be built are on paper before the first proposal reaches a buyer. No enquiry, trial lot or furnace load is promised. If a treatment you offer is not worth marketing, or your furnace is already full, we say so plainly.
Sales and channel services
Choose the sales work your business needs.
Review the sales and channel catalogue in the context of heat treatment companies. Each page states what the service covers and when it is unsuitable. A specialist programme is not assumed to fit every industry.
210 services available.
Sales strategy and process (29)
- Account-based selling
- Appointment setting
- Bid or no-bid decision framework
- Business development strategy
- Competitive intelligence
- Dedicated sales team services
- Enterprise and solution selling
- Inside sales
- Institutional and government sales strategy
- Outbound sales prospecting
- Outsourced sales and business development
- Precast and construction materials tender-to-order programme (check programme fit)
- Pricing and packaging strategy
- Pricing waterfall and discount leakage analysis
- Product and service launch strategy
- Quotation and proposal follow-up
- Quotation management
- Retail sales conversion consulting
- RFP and tender management
- Sales audit
- Sales discount management
- Sales margin improvement
- Sales performance improvement
- Sales strategy and consulting
- Sales strategy, management and enablement
- Sales transformation consulting
- Sales turnaround consulting
- Technical presales and sales engineering support
- Win-loss analysis
Sales training and enablement (29)
- Capability statement writing
- Consultative selling implementation
- Field sales support
- Negotiation and closing support
- Negotiation training
- Objection handling training
- Product and service brochure copywriting
- Product one-pager writing
- Product specification sheet writing
- Proposal development
- Sales certification programme design
- Sales closing training
- Sales coaching
- Sales collateral development
- Sales competency assessment
- Sales discovery process design
- Sales enablement
- Sales leadership development
- Sales manager training
- Sales messaging, scripts and follow-up sequences
- Sales playbook development
- Sales presentation and demo improvement
- Sales presentation and demo script writing
- Sales team onboarding
- Sales team training programme
- Sales training and development
- Sales training needs assessment
- Value-based selling implementation
- WhatsApp sales process
CRM, sales operations and RevOps (46)
- Conversation intelligence
- CPQ consulting
- CRM administration and support
- CRM adoption and training
- CRM consulting and selection
- CRM data cleansing, deduplication and governance
- CRM data migration
- CRM implementation and customisation
- Deal desk services
- Deal risk assessment
- Engineering college admissions enquiry management (check programme fit)
- Enquiry response starter
- Field sales beat planning
- Hospital enquiry-to-appointment conversion programme (check programme fit)
- Lead capture and lifecycle management
- Lead database management
- Lead leakage analysis
- Lead qualification
- Lead response and follow-up
- Lead routing and assignment
- Lead scoring
- Lead-to-order process design
- Marketplace lead management programme
- Order booking process improvement
- Pipeline hygiene and governance
- Pipeline management
- Revenue and sales operations
- Revenue operations, CRM data and AI
- Revenue process documentation
- Revenue technology stack audit and architecture
- RFQ management
- Sales activity management
- Sales administrative support
- Sales approval workflow design
- Sales call auditing and conversation quality assessment
- Sales cycle optimisation
- Sales escalation process design
- Sales handoff process design
- Sales metrics and KPI development
- Sales process design and implementation
- Sales productivity improvement
- Sales to operations order handover design
- Sales workflow automation
- Stalled opportunity recovery
- Territory planning
- Truck and commercial vehicle dealer lead-to-booking programme (check programme fit)
Customer success and retention (42)
- Account management and key account growth
- Account whitespace and contract expansion analysis
- B2B customer reference programme
- Churn analysis and reduction
- Complaint and escalation management
- Customer adoption programmes
- Customer advocacy and proof marketing
- Customer advocacy programmes
- Customer case studies
- Customer education and knowledge base development
- Customer engagement campaigns
- Customer experience strategy and journey mapping
- Customer experience, success and retention
- Customer health scoring
- Customer lifecycle marketing
- Customer loyalty programmes
- Customer onboarding
- Customer onboarding implementation assurance
- Customer reactivation
- Customer referral campaign copywriting
- Customer referral programmes
- Customer renewal, re-engagement and upsell message writing
- Customer research and voice of customer
- Customer retention and reactivation campaigns
- Customer retention strategy
- Customer satisfaction, NPS and feedback programmes
- Customer segmentation
- Customer service strategy
- Customer success automation
- Customer success consulting
- Customer support process design
- Customer testimonials
- Customer welcome and onboarding content writing
- Digital customer journey design
- Helpdesk and contact centre setup
- Referral and loyalty campaign creative design
- Referral marketing
- Renewal management
- Repeat sales management
- Service recovery programmes
- Strategic account management
- Upselling and cross-selling
Fractional leadership and audits (22)
- Annual revenue planning
- Founder to sales team transition
- Founder-led sales advisory
- Fractional chief revenue officer (CRO)
- Fractional head of sales
- Interim sales leadership
- Management dashboards and reporting
- Quota and capacity planning
- Revenue analytics and intelligence
- Revenue growth audit
- Revenue leadership and management reviews
- Revenue model and monetisation strategy
- Revenue planning and fractional leadership
- Revenue target planning
- Sales compensation and incentive design
- Sales forecasting
- Sales management
- Sales organisation design
- Sales profitability analysis
- Sales recruitment and candidate assessment
- Sales review management
- Sales team structure and role definition
Dealers, distributors and partners (42)
- Channel governance and conflict management (check programme fit)
- Channel opportunity generation and follow-up (check programme fit)
- Channel partner engagement campaigns (check programme fit)
- Channel partner franchise and retail growth (check programme fit)
- Channel partner recruitment (check programme fit)
- Channel performance management (check programme fit)
- Channel sales strategy and route to market execution (check programme fit)
- Channel territory planning (check programme fit)
- Cloud marketplace listing and co-sell (check programme fit)
- Co-operative partner marketing (check programme fit)
- Dealer and distributor audits (check programme fit)
- Dealer and distributor programme (check programme fit)
- Dealer co-funded lead generation programmes (check programme fit)
- Dealer development (check programme fit)
- Dealer lead generation (check programme fit)
- Dealer network brand visibility (check programme fit)
- Dealer sell-through analytics (check programme fit)
- Distributor development (check programme fit)
- Distributor onboarding digital academy (check programme fit)
- Distributor sales force effectiveness (check programme fit)
- Export and international market development (check programme fit)
- Franchise development, recruitment and expansion (check programme fit)
- Industrial distributor dealer sell-through programme (check programme fit)
- Market development fund management (check programme fit)
- Outsourced dealer sales support (check programme fit)
- Partner compensation and incentive design (check programme fit)
- Partner enablement, training and certification (check programme fit)
- Partner onboarding (check programme fit)
- Partner portal and PRM implementation (check programme fit)
- Partner programme design (check programme fit)
- Partner relationship management (check programme fit)
- Partner segmentation and tiering (check programme fit)
- Partnership and co-marketing (check programme fit)
- Point-of-sale marketing (check programme fit)
- Referral partner programmes (check programme fit)
- Reseller programme development (check programme fit)
- Retail execution and merchandising (check programme fit)
- Retailer marketing (check programme fit)
- Route to market and distribution strategy (check programme fit)
- Secondary sales tracking (check programme fit)
- Trade and dealer marketing (check programme fit)
- Trade promotion planning (check programme fit)
A practical starting point · Heat treatment companies
Start with one buying journey.
Use a real enquiry to find the first useful change. You do not need to buy every service listed on this page.
- The record to review
- Start with a recent RFQ and the quotation it produced. Remove buyer identifiers, then retain the specification, quantity, delivery requirement, and reason the order moved forward or stopped.
- The buyer's question
- Check whether the buyer can establish technical fit before asking for a price. Purchasing, engineering, and the end user may need different evidence from the same product page.
- The handover to agree
- Give the technical question to someone who can answer it, and keep the commercial follow-up with a named owner. A vague request for a catalogue should not be treated as a qualified RFQ.
Who it is for
This is written for these heat treatment companies.
- Hardening and tempering shops for tools, dies and moulds
- Case hardening and carburising for gears and shafts
- Nitriding and surface hardening units
- Vacuum heat treatment providers
- Induction hardening specialists
- Annealing and stress relieving for fabricators and castings
- Heat treatment for forgings and fasteners
- In-house heat treatment units that take outside work
Before you decide
When this may not be the right fit.
- You want a guaranteed Google ranking or a guaranteed number of leads. Nobody honest can promise either.
- You need enquiries by next week and have nobody to answer them.
- You want posts and reach reported, not enquiries and orders.
How it works
How the work runs for heat treatment companies
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the job cards
Last year's job cards show the steels and lot sizes that filled your furnaces, the customers who sent them and the enquiries that did not become a lot.
- 2
Document the capability
A furnace and testing sheet and the case notes that can be shared.
- 3
Write each treatment page with your metallurgist
A page for each treatment is drafted from the furnace and testing sheet, then checked line by line by your metallurgist.
- 4
Reach the buyers
Outreach to tool rooms, forges and component makers, with search ads for urgent treatment searches.
- 5
Fill the quiet furnace weeks
A trial-lot tracker, a slot-offer template for quiet furnace weeks and a referral ask for approved customers.
Proof
Published examples of our work.
Each example names the client and the work delivered. Some examples come from related industries; use them to assess the method, not to predict your results.
SB Engineering
- Situation
- Buyers searching for laser cutting and sheet metal work in Bengaluru were finding other suppliers first, because the company did not rank for the terms its own customers type.
- What we did
- The site redesigned for mobile
- Search work on the buyer's terms
- Content that shows the work
- Social channels managed
- Result
- Website traffic rose 60% within six months, against a target of 50%.
- High-quality leads rose 45%, with a rise in conversion rates alongside them.
- Fifteen target keywords moved up the rankings, five of them into the top three positions.
Burhani Hydroline
- Situation
- The website was dated. Menus were hard to follow, pages were slow, and it did not work properly on a phone, which is where a buyer looks first.
- What we did
- Research before design
- Wireframes and prototypes
- The full product catalogue
- An online checkout
- Result
- No numbers were recorded for this engagement. The work is described in full in the case study.
Also worked with
Chord Road Hospital · Curtain Label · Difesa Security Services · Felicity Inn · Hands On CSR · Implevista · Kambar Group · Kalessi · Kerur Pain Clinic · LL Trust · Lucky Deals · Natural Gases · NavaShakthi Souhardha · NewCom Logistics · Proton Technical Services · Shakthi Foundation · Shakthi Group · Urbanest · Insyde Studio · Venkateshwara Laser Tech · Vivara Studios
Where this fits
Three pieces of sales work, in this order.
Start by finding where enquiries and orders are being lost. Agree the changes to your sales process, then decide who will manage the work and review the results.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions heat treatment companies ask before they call.
Not here? More answers, or ask on WhatsApp.
We rely on a handful of tool rooms. Can you widen that?
Will you make claims about hardness or part life?
How do we show quality without revealing customers?
Does heat treatment need ads?
Can you help with vendor approvals?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
Part of Manufacturing. See the other industries in the sector.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.