Skip to content
GullySales

HMC machining companies · CRM

Keep every plant, role, part and next step in one place the owner can read.

A CRM for an HMC shop is a simple record of each target plant, the people in it, the parts discussed and the next dated step. GullySales sets up the fields and the habit around a tool in ordinary use in India, so a long sale does not depend on the owner's memory.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For HMC machining companies

Where it usually goes wrong, and what we would do.

  • “A sale that takes months outlives anyone's memory”

    The owner remembers the plant visit but not that the quality manager asked for a sample report. Three months later the thread is cold. A record with the date and the promise stops the account going quiet by accident.

  • “The unit is the account, with several people inside”

    A plant holds a sourcing head, a quality manager and an engineer, each at a different stage. A contact list flattens that. The record needs the plant as the parent and each role beneath it with its own notes.

  • “Parts and drawings need a place of their own”

    The conversation is about a particular housing or valve body, with a weight, a material and a drawing status. If that detail lives in email, the next person cannot find it. Record the part against the account.

  • “Spreadsheets break when two people edit”

    A shop starts in a sheet, and it works for a while. Once the owner and a sales engineer both update it, versions collide. Move to a shared tool when a second person starts to use the list.

What we do

What we deliver for HMC machining companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Account and role fields

    A set of fields for plant, role, parts, stage, last contact and next step, kept short enough to fill in.

    Result: Each account shows its stage and next step at a glance.

  2. Stage definitions

    Written definitions for researched, approached, replied, visited, first article and approved, so everyone uses the words the same way.

    Result: Two people describe the same account with the same stage.

  3. Tool set-up

    A shared CRM set up with your fields, imports of your existing lists and a simple view for the owner.

    Result: The owner opens one screen and sees every named plant.

  4. Entry habit

    A short routine for logging a call, a visit or a promise on the same day.

    Result: Every promise to a buyer has a date against it.

  5. Part and quote log

    A way to record the parts discussed with each plant, the quote status and the reason for any loss.

    Result: You can see which parts each plant has asked about.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields that let the owner see every plant, role and part at a glance.

Plant, unit and group
Entered by whoever opens the account. Lets the owner see which units of one group are already approached and which are untouched.
Contact role and name
Filled when a name is learned. Lets a message reach the right person and shows which roles at the plant are still unknown.
Part family and pallet size
Entered from the drawing or enquiry. Lets you match the part to your machine list and spot repeat parts.
Stage of the sale
Target, introduced, visited, sample, quote, trial lot or running. Lets the owner see which accounts are stuck and which are moving.
Next step and date
Set at the end of every contact. Lets the owner open the sheet and see what is due without asking anyone.

Who it is for

This is written for these HMC machining companies.

  • Tractor and farm equipment housing machinists
  • Commercial vehicle gearbox and axle housing shops
  • Valve body and pump casing machining units
  • Compressor and engine block machining shops
  • Wind and power transmission casting machinists
  • Construction equipment and mining component suppliers
  • Railway component machining vendors
  • Contract HMC shops working for several foundries

Before you decide

When this may not be the right fit.

  • Nobody at the shop will enter a record after a call, so a CRM would sit empty and the owner would still rely on memory
  • You have not yet fixed what each stage of the sale means, and the record would have stages that mean different things to different people

Before you decide

Agree the work. Know how to judge it.

CRM for HMC machining shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from HMC machining companies. Anything missing is noted in the written scope, with who will supply it.

Your live and past quotes with dates
A folder or sheet showing quotes sent, to which plant, for which part and when. Even a rough list will do. Without it the pipeline starts empty and the long sale begins without history.
A list of plants and people you know
Every plant you have dealt with or approached, with names and roles, drawn from phone contacts, visiting cards and email. Missing data is acceptable. Without a list we cannot import, and the first weeks are spent typing.
A decision on who enters the notes
Name the person who writes down each call and visit, whether the owner, the sales lead or an assistant. Without one, the record depends on memory again and the habit fails.
A shared folder for drawings
A folder with controlled access, where drawings and quotes are stored by plant. The CRM links to it. If drawings are scattered on personal phones, we ask for them to be moved first.
A view on who may see which accounts
A decision on whether the whole team sees all accounts or only their own. Drawings may be confidential. Without a decision, we limit access to the owner and sales lead.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one account from first call to purchase order

    We sit with the owner and the sales lead and trace one recent account from the first contact to the purchase order: who was met, which drawings changed hands, which quote went out and when the first article was approved. You say where it nearly stalled. These stages become the pipeline the record will hold.

  2. 2

    Write the account and role fields

    We agree the fields: plant, location, parts discussed, each person met with role, the last contact, the next dated step and the reason for the stage. Any field no one will fill is struck off by you. A plant record carries several people, so the design starts from the account, not from a single contact.

  3. 3

    Choose a tool the owner will open

    We compare a few tools in ordinary use in India, including a plain shared spreadsheet, against what your team does. You decide. We recommend the lightest tool that holds several people under one account. The tool is tried on three real accounts before you buy anything.

  4. 4

    Load live accounts with parts and quote log

    We enter the plants currently in play, with the people, the parts discussed and the quote history, from your emails and notes. Drawings stay in a folder, linked from the record, not stored inside it. The sales lead checks each entry against what actually happened.

  5. 5

    Run it with the owner at the next call

    For the next set of calls and visits, the owner and sales lead enter the notes straight after, and we watch what is skipped. Fields that are not filled are removed or simplified. Stage definitions are tightened where two people read them differently. The record is accepted when the owner stops keeping a separate list.

  6. 6

    Read stalled accounts against the record

    After a period of use, we look at which accounts have no dated next step and which stage holds the largest pile of quotes. Against the account list recorded at the start, you see which plants went quiet. Ownership of the record is written down, and you decide who maintains it.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM should an HMC shop use?
One your team will actually open. Several tools in ordinary use in India suit a small account list. The choice matters less than the fields and the habit of updating them the same day.
Do we need this for only a handful of accounts?
A handful of large accounts is exactly where a lost follow-up costs most. The record can be light, but each account needs a stage, a role map and a dated next step.
Should quotes and drawings sit inside the CRM?
Keep a link and a short log in the CRM, not the drawings themselves. Drawings are the customer's confidential work and need tighter access than a sales record. The log notes the part, the quote date and the file's location, so the owner finds it without opening the file.
Should quotes and drawings sit inside the CRM?
Keep a link and a short log in the CRM, not the drawings themselves. Drawings are confidential and need tighter access than a sales record. The log notes the part, the quote date and the file's location, so the owner finds it without opening the file.
Who in the shop should be allowed to edit account records?
Only the people who meet plants: the owner, the sales lead and anyone who visits. A production head may read the record to prepare for a visit but need not edit. Fewer editors keep the stage definitions steady and the notes honest. We set the permissions during set-up and write them in a half-page note, so a new person added later is given the right access from the start and not full access by default.
What happens to the record if the sales lead leaves?
The shop keeps the record because the shop owns the account and the logins. Before the sales lead leaves, the next dated step on every live account is checked and any plant not yet entered is added. The owner then reassigns the accounts and introduces the new person to each plant. This is the case the record is built for, since a long sale otherwise leaves with the person who remembered it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.