HMC machining companies · Lead generation
Find the few plants that buy large machined castings, and reach the right role.
Lead generation for an HMC shop means finding the named plants, and the sourcing or vendor development role inside each, that buy housings, valve bodies and casings of your size. GullySales builds the list, the first message and the follow-up for each account, and you keep the technical conversation.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What lead generation means
Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.
Plan the next part of the work
Last updated 21 Nov 2026.
For HMC machining companies
Where it usually goes wrong, and what we would do.
“A lead here is a plant and a role, not an enquiry form”
A form fill is rare for a gearbox housing. The real lead is a vendor development manager at a plant whose current machinist is stretched, and nobody at your shop knows that manager's name yet. Generation starts with finding the name, the part and the supplier gap.
“The owner approaches three plants and stops”
Production pulls the owner back to the shop floor, so the approaches end after the first few replies. The remaining plants stay unvisited for years. A list with a stage beside each name keeps the work moving when the owner is busy.
“Buyers move when a vendor slips, not when a brochure arrives”
A sourcing head looks for a second source after a late delivery or a rejected lot. Your message lands well only if it is already in their inbox and says plainly which pallet size and which castings you take.
“A lead that visits and goes quiet is still a lead”
After a plant visit the buyer's quality team asks nothing for a while. Silence is not a no. Each such account needs a dated next step, such as a sample report or an offer of a trial lot.
What we do
What we deliver for HMC machining companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Researched target list
Plants that buy large machined castings, with the role to approach, the parts they buy and the vendor they use now where that is public.
Result: You hold a written list of named plants with a stage beside each.
First message and capability sheet
A short message for sourcing roles and a one-page sheet listing pallet size, axes, CMM range and the largest casting you machine.
Result: A sourcing head can forward one sheet to a quality manager.
Second-source trial offer
A letter proposing a trial lot on a non-critical part, so the buyer can inspect your work without risking a key housing.
Result: The letter names the trial part and what the buyer will inspect.
Foundry referral note
A note for foundries whose customers ask for finished machining, stating the casting sizes and weights your pallets take.
Result: A foundry can pass your note to a customer without rewriting it.
Lead stage sheet
A sheet that records each account as researched, approached, replied, visited, first article or approved.
Result: Every named plant shows a stage and a dated next step.
How the result is measured
- Relevant enquiries by source
- Duplicate and unsuitable enquiries
- Time to the first response
- Accepted enquiries reaching an agreed next step
Recorded as a baseline before work starts, so every later report has an honest comparison.
What to capture or send
Record the plant, the role and the part before the lead is called warm.
- Plant and unit
- Name the exact plant, not only the group. A tractor maker or valve company buys housings from each unit separately, so the record has to say which one.
- Role and name
- Vendor development, sourcing head, quality manager or design engineer, with the name where known. Decides who gets the message and who gets the sample report.
- Part family and pallet size
- The housing, block or casing named, with the pallet size it needs. Lets you say at once whether your machine list fits the part.
- Current vendor gap
- Late deliveries or rejected lots, if the buyer mentioned them. Shows when a second source would be welcome and what to say.
- Next dated step
- A plant visit, a sample report or a trial lot, with a date beside it. Stops a quiet account from drifting out of sight.
Who it is for
This is written for these HMC machining companies.
- Tractor and farm equipment housing machinists
- Commercial vehicle gearbox and axle housing shops
- Valve body and pump casing machining units
- Compressor and engine block machining shops
- Wind and power transmission casting machinists
- Construction equipment and mining component suppliers
- Railway component machining vendors
- Contract HMC shops working for several foundries
Before you decide
When this may not be the right fit.
- Your machine list does not cover the pallet sizes of the plants you picked, so more introductions would only meet a polite no
- No one at the shop can host a plant visit or issue a first article report, so a reply from a buyer would find nothing ready
Before you decide
Agree the work. Know how to judge it.
Lead generation for HMC machining shops: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.
Make the scope clear
Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.
Check the work in use
Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.
Know when to change course
If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from HMC machining companies. Anything missing is noted in the written scope, with who will supply it.
- Your machine list with pallet and travel sizes
- A single sheet naming each horizontal machining centre, pallet size, axis travel, maximum part weight and the controller. A printed brochure is fine if it is accurate. Without it we cannot say which parts your shop takes, and the first message would claim too much or too little.
- Customer list and what you machine for each
- The names of customers you may mention internally, and the parts you supply them, marked clearly where a name must stay private. We use it to find plants like them. If confidentiality blocks it, we work from part families instead of names, and the list is built more slowly.
- A sample inspection report you may share
- A first article or final inspection report from the CMM with the customer's name and part number removed. It shows the buyer what you measure. If none can be redacted, we describe your inspection capability in words and say the report is shown on request.
- The production head's time for drawing questions
- One person who can answer a casting drawing question on the day it arrives. They need not be fast, but they must be named. If nobody can answer, a keen plant waits and the lead goes cold, so we would reduce the number of plants contacted.
How it works
How the lead generation work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
List the parts your pallets were built for
We start on the shop floor with the owner and the production head, listing the housings, valve bodies and casings your horizontal machines run best, with the largest and smallest part and the tolerances held. You tell us which jobs you would gladly run again. From this we write the part families that decide which plants are worth approaching, and we drop plants whose parts your pallets cannot take.
- 2
Draw up named plants and the roles in them
Using the customer list, supplier meet contacts and foundry introductions, we build a list of named plants, each with the sourcing head, vendor development manager or quality manager we should reach. You mark plants you will not approach and those where a relative or friend can introduce you. The list is capped at a number you can actually visit, and each plant gets a one-line reason it was chosen.
- 3
Write the first message with the machine list
We draft the first message and a one-page capability sheet from your machine list, pallet sizes, inspection range and the parts families, adding a casting drawing the plant could send. Your production head corrects every figure. You decide whether a second-source trial lot is offered and on what terms. What exists after this step is a message that reads like a vendor, not an advertisement.
- 4
Send to five plants and read what returns
Before the whole list is used, we send the message to five plants, by the route you choose: a direct email, a foundry contact or a request at an industry meet. We note who replies, who asks a drawing question and who stays silent. Your production head answers technical replies. Anything in the message that drew confusion is rewritten before the next group is approached.
- 5
Compare plants approached with visits arranged
We keep one sheet showing each plant, the person reached, the stage and the next dated step, as recorded from the start. After the first round, you see how many plants replied, how many asked for a visit and how many sent a casting drawing. Against the baseline of enquiries recorded before the work, you decide which parts families and which plants to pursue, and which to drop.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
How many plants should we target at one time?
Do we need a lead generation website for this?
What if a plant already has a trusted HMC vendor?
What if a plant already has a trusted HMC vendor?
Should we offer a trial lot to a plant that has not asked?
What do we do when a plant replies with a request we cannot meet?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for HMC machining companies
Related work to consider.
Closest to this: leads and follow-up
Also for HMC machining companies
Or start from the overview: sales and marketing for HMC machining companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.