Skip to content
GullySales

Marble processors · CRM

Write down who stood in front of which stack, and what they said next.

A CRM for a marble processor is a single record of every visitor, mason, designer and builder, with the stone they liked and the next call due. GullySales sets up a simple CRM in a tool your staff will use, with fields that suit stone: lot, area, thickness and the mason involved.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A supervisor shows granite and marble slabs to an architect

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For marble processors

Where it usually goes wrong, and what we would do.

  • “The card in the visitor's pocket is the only record”

    A rate written on the back of a visiting card goes home with the buyer. The yard keeps nothing. A CRM entry made while the family is still in the yard keeps the name, the stone and the follow-up date.

  • “Masons need a profile, not a mention”

    A mason who brings work should have a record of jobs, stones preferred, agreed arrangement and the last call. Without it, the owner remembers only the loudest few.

  • “Lot and area belong in the record”

    A quote for a floor depends on the area, the stone and the lot. If these sit in separate notes, a later order for the same house starts from nothing.

  • “A system staff skip is worse than a notebook”

    If entering a visitor takes more than a minute at the counter, staff stop. The fields must be short, the tool must open on a phone, and the owner must read the record.

What we do

What we deliver for marble processors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. CRM set-up with stone fields

    Contact, source, stone liked, rooms, area, lot, quote value, next call and mason involved, in a tool your staff will use.

    Result: Each visit has an entry you can search by stone, mason or date.

  2. Mason and contractor records

    A profile for each mason with jobs, stones preferred, arrangement and call history.

    Result: You can see which masons have gone quiet and who is due a call.

  3. Quote stages

    Stages from visit to quote sent, follow-up made, order confirmed and delivered, with a reason noted when an order is lost.

    Result: The pipeline shows where enquiries stop.

  4. Counter entry routine

    A one-minute routine for staff to add a visitor before they leave, on a phone or tablet.

    Result: Every visitor in the day is in the record by closing.

  5. Import of existing contacts

    Masons, contractors and past customers moved from notebooks, phones and sheets into the CRM.

    Result: Your existing relationships sit in one place.

  6. Owner view

    A single screen of open quotes, calls due and masons to contact.

    Result: The owner starts the morning with a clear list.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Record the stone, the room and the person who decides.

Stone and lot viewed
The counter staff enter the stone and lot the visitor looked at. A later quote can then match the same shade.
Rooms and area quoted
The quoting person writes the rooms and floor area. It lets the owner see which enquiries are large jobs.
Decision maker and the mason's name
Counter staff note who decides and who will lay the floor. The mason's profile builds up from these entries.
Quote stage
Enquiry, quoted, sample taken, ordered or lost, updated by the quoting person. It gives the owner a view of what is open.
Reason an order was lost
The person who rang writes the family's reason in their words. It shows whether the problem is rate, stone or delivery.

Who it is for

This is written for these marble processors.

  • Indian marble processors working with white, beige and green stone
  • Importers and processors of Italian, Turkish and Spanish marble
  • Marble floor and staircase contractors who own a cutting yard
  • Temple and idol marble workshops buying from processors
  • Marble dealers with a polishing and edge-cutting line
  • Processors supplying bathroom, vanity and wall cladding work
  • Inlay and decorative marble unit owners
  • Wholesale marble traders selling to retail yards in smaller towns

Before you decide

When this may not be the right fit.

  • No one at the counter will enter a visitor's details, and a record kept by the owner alone would be missing most visits.
  • Your contacts are on visiting cards and several phones, and nobody has agreed to bring them into one list.
  • The yard has too few repeat buyers to need more than a notebook this year.

Before you decide

Agree the work. Know how to judge it.

CRM for marble processors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from marble processors. Anything missing is noted in the written scope, with who will supply it.

Visiting cards and counter diaries
Bring the cards and diaries as they are, even from a drawer, along with any slips the polishing section keeps with a name and a stone written on them. We read names, stones and notes from them. If they are lost, the record starts with new visitors only, and past customers are missed.
A list of masons with their phone numbers
Give us the names of masons and contractors who send work, with a note on the areas they work in. The record for each is built from it. Without it, they appear only as a name on a quotation.
A person at the counter who will keep it
Name the person who enters each visitor. We train them, and without one the record stays incomplete. If no one can be spared, we keep the fields to the few that fit between customers.
A rule on who sees customer details
Decide who may see names, numbers and quotes. A shared sheet can be copied by anyone who has it. We set access to your rule, and without one we limit it to the owner and the manager.
Your quote stages in your own words
Tell us what you call each stage: slab seen, quote sent, family comparing, order placed, lost. We use your words in the record. If you give none, we propose stages and you may find they do not match how the counter talks.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Collect the cards, diaries and phone lists

    We gather visiting cards, the counter diary, the quotation book and the phone contacts of the owner and the manager. We lay them out together and note which names appear in several. You tell us which source you trust for who is a real customer. That source becomes the base of the record.

  2. 2

    Pick a tool the counter will open

    We look at who will enter data, on what device and in what pauses between customers. You choose between a shared sheet and a simple CRM tool. When in doubt we choose the one the counter staff already know, because a record nobody opens is worse than the notebook.

  3. 3

    Set the fields around stone, lot and area

    We design the fields a yard needs: visitor, mason or contractor involved, stone, lot, thickness, area to be covered, quote stage and next call. We test the fields on three recent jobs. Any field the counter cannot fill between customers is removed.

  4. 4

    Give masons and contractors their own records

    A mason who has sent ten jobs deserves more than a mention on a visitor's line. We set up a record for each mason with the jobs they brought and the stones they lay. You decide how to mark a mason who is also a buyer, so the two are never mixed.

  5. 5

    Import contacts and begin the counter routine

    We enter the existing contacts together with the person who will keep the record, and mark old customers who have gone quiet. Then we rehearse the counter routine on live visitors: ask, note, set the next call. You decide what the owner sees on a single screen.

  6. 6

    Read the record against the earlier count

    At the start we noted how many open quotations the yard held and how many customers were active. Now we read the same figures from the record, with the quote stages and the quiet names. You decide what the manager checks and which fields to change.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM tool should we use?
One that your staff will open every day, on a phone, in your language. Some Indian yards start with a simple sheet or a low-cost CRM. We set up the one that fits your team, and we do not push a large system.
Who enters the data?
The person at the counter or on the call, while the visitor is still there. The owner reviews. If only one person can enter data, the record will be late and thin.
Is our customer data safe in a CRM?
Choose a tool that lets you control who sees what, keep phone numbers limited to staff who need them, and tell customers how you use their details. Check data rules with your own adviser.
Is our customer data safe in a CRM?
It is as safe as the account and the people who open it. Use a login for each user, remove access when staff leave, and keep the account in the yard's name. Families give you addresses and phone numbers, so share them with no one outside the yard.
Can the record store customers' addresses and site photographs?
It can store the site address and photographs of the area to be covered, because the job needs them. Keep only what the quote requires and share it with those who need it. Do not keep identity papers or payment details in a sheet. Ask the customer before you store anything beyond the job, and check with your own adviser if you are unsure of the rules.
What do we do with customers who have gone quiet?
Mark them as quiet with the date of the last contact and the stone they liked, and review the list with the manager. A call that mentions the stone they chose is better than a general message. If a customer has asked not to be contacted, mark that clearly so no one calls. The record keeps that instruction beside the name.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.