Skip to content
GullySales

Marble processors · Follow up systems

Turn a card with a rate on it into a call, a photograph and a decision.

A follow-up system for a marble processor is a set routine for what happens after a yard visit or a quote: who calls, what is sent and when the next call falls due. GullySales builds the routine, the messages and the record so no visitor leaves without a dated next step.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A supervisor shows granite and marble slabs to an architect

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For marble processors

Where it usually goes wrong, and what we would do.

  • “The first message decides the second call”

    A message with photographs of the exact slabs the family stood in front of is remembered. A generic message is ignored. The yard needs the stone noted at the counter to send the right photographs.

  • “Quotes get stuck while the family compares”

    A family holds three rates and a mason's opinion. A call that asks what is missing from the quote, such as stairs or sills, moves the decision, while a call that asks 'have you decided' does not.

  • “The mason needs a follow-up of their own”

    After a job the mason wants to hear that the lot was right, the bill was accurate and a repeat order is welcome. A call to the mason keeps the next floor with the yard.

  • “Lost orders teach if the reason is written”

    A family that chose another yard will say why if asked kindly. Price, stone, credit or delivery each point to a change the yard can make, but only if it is recorded.

What we do

What we deliver for marble processors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Post-visit message set

    Short messages with photographs of the slabs a visitor liked, sent on the day agreed at the counter.

    Result: Each visitor has a message due and sent against their name.

  2. Quote follow-up steps

    A call plan for each quote: who calls, what to ask and how to record the answer.

    Result: Open quotes show a next call date, not a blank.

  3. Mason aftercare call

    A call after each job to the mason, asking about lot, delivery and any problem.

    Result: Each completed job has a mason call recorded.

  4. Lost-order question

    A polite question to ask a buyer who went elsewhere, and a place to record the reason.

    Result: Reasons for lost orders are in the record and can be counted.

  5. Seasonal reminder to earlier enquirers

    A message before Diwali and the housewarming months to people who enquired earlier, with current stock.

    Result: Earlier enquirers hear from the yard when they are likely to be planning.

  6. Daily call list

    A list for the owner of calls due that day, drawn from the record.

    Result: The owner or staff know whom to call without searching.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Decide what the family gets after they leave the stack.

Message after the visit
Send the same evening a photograph of the slab they liked, with the stone name and lot. It lets the family discuss at home with something to look at.
Quote sent, family comparing
Follow up with a new fact, such as the lot is being held or a matching piece is in stock. Avoid a call that only asks if they have decided.
Mason aftercare call
Ring the mason a day after delivery to ask how the slab cut. The answer protects the next order and the relationship.
Order lost
Ask the family once why they chose elsewhere and write the answer down. It teaches the owner more than a polite goodbye.
Early enquirer, building season returns
Ring families who enquired earlier when their stage of building moves on. They may have been waiting for the walls to be ready.

Who it is for

This is written for these marble processors.

  • Indian marble processors working with white, beige and green stone
  • Importers and processors of Italian, Turkish and Spanish marble
  • Marble floor and staircase contractors who own a cutting yard
  • Temple and idol marble workshops buying from processors
  • Marble dealers with a polishing and edge-cutting line
  • Processors supplying bathroom, vanity and wall cladding work
  • Inlay and decorative marble unit owners
  • Wholesale marble traders selling to retail yards in smaller towns

Before you decide

When this may not be the right fit.

  • The yard keeps no record of who visited, so the follow-up would have no list to work from.
  • Quotes go out with no lot recorded, and a follow-up would promise a shade the yard cannot match.
  • The owner wants every family called until they decide, which would drive families to the next yard.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for marble processors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from marble processors. Anything missing is noted in the written scope, with who will supply it.

Open quotations with the date sent
List every quotation still open with the stone, the customer and the date. The routine begins there. Without the dates, we cannot tell which are fresh and which have gone cold.
A person who owns the call list
Name the person who works through the call list on working days. A list belonging to everyone is read by no one. If you cannot name one, we shorten the list so it can be handled alongside the counter.
Past reasons customers gave for choosing elsewhere
Recall what customers said when they went to another yard: rate, distance, credit, stone. Even a few remarks help, such as a family that chose a nearer yard for the sake of a quick delivery or one that wanted a stone you did not hold. Without them, the lost-order question has no baseline, and we cannot judge a pattern.
Rules for what the yard will offer
Decide what the yard will offer to a family comparing quotes: a second look at the stack, a sample cut, a visit to a laid floor. Each needs your approval. Without it, staff improvise and offers differ.
The calendar of local building seasons
Tell us the times of year when floors are laid in your area, such as before festivals or after the rains. The reminder to earlier enquirers follows it. If you cannot say, we send none and you add it later.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace what happens after a visitor leaves

    We follow three recent visitors from the counter to the outcome, reading the quotation book and asking who called whom. We see where the chain broke: a note not written, a call forgotten, a quote not sent. You confirm what we found, and the points of loss become the places the routine must act.

  2. 2

    Write the first message after a visit

    The first message decides whether a second call is welcome. We write it with the counter staff: it names the stone the visitor liked, repeats the area to be covered and says what happens next. The counter reads it aloud to hear if it sounds like the yard. We adjust the wording to match.

  3. 3

    Set the steps for a quote that sits

    A family compares quotes at home for some time. We design the steps for a quote that has gone quiet: a message about the stone, a call that asks what they are comparing, and a sample offer. You decide how far the yard goes. Each step is marked in the record.

  4. 4

    Give the mason an aftercare call

    A mason who laid a floor should hear from the yard once the floor is done: how did the stone cut, were there breakages, what do they need next. We write the call and set who makes it. The mason's remarks go on their record.

  5. 5

    Ask the lost-order question and write it down

    When an order goes elsewhere, one person asks politely why and records the answer in the buyer's own words. We write the question and a place for it in the record. You read the answers with us, since they tell where the yard loses jobs.

  6. 6

    Review the call list against orders

    At the start we noted how many quotations became orders. Now we look at the call list, the quotes that turned into orders and the recorded reasons for losses. You decide which step to strengthen and which seasonal reminder to send to earlier enquirers.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How many follow-ups are too many?
Stop when the buyer asks you to, or when the order is clearly gone. Each message should add something, such as a photograph, a price for stairs or a lot update. Never send the same message twice.
Can staff follow up on WhatsApp?
Yes, with the buyer's agreement to be contacted there. Keep messages short, send photographs, and check the platform's current rules on business messaging before sending anything in bulk.
What if a family says they will call us?
Note the date you said you would check back, and tell them. 'I will send the photographs on Tuesday and ring Wednesday' is a polite plan a buyer can accept.
What if a family says they will call us?
Thank them, ask the single question that would help them decide, and note a date to make one more contact. Families compare several yards and a polite second message is expected. Mark their preference in the record so the next person does not repeat the question.
How do we avoid calling a family too much?
Agree at the visit when the family would like to hear from you, and write it down. Ring then, and ask one question about the stone. If they say they will call you, record that and let the date pass quietly before one polite message. Limit the steps in the routine, and stop when a family asks. The record shows who called last so nobody repeats the call.
What should the call to a mason after a floor ask?
Ask how the stone cut and laid, whether any pieces broke or mismatched, and whether the mason has another job coming where the yard could supply stone. Write the answers on the mason's record. If a piece broke, ask the mason to describe it so you can check the lot. The call is a courtesy and a source of information, and it should not turn into a sales pitch.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.