Skip to content
GullySales

MDF manufacturers · Website

Build a site where a factory finds the board, the test sheet and the sample button.

A website for an MDF manufacturer holds the boards, their uses, the technical pack and a route to request a sample or find a dealer. GullySales designs and builds the pages so a purchase head, a carpenter or an importer reaches what they need without a call.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A stockroom worker checks sheets of MDF, plywood and particle board

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For MDF manufacturers

Where it usually goes wrong, and what we would do.

  • “A rate card is not a website”

    A site that lists sizes and a phone number leaves the buyer to guess which board suits the job. Pages that explain the board, the use and the test answer the question before the first call.

  • “The quality person reads the site too”

    A factory purchase head forwards the link to the quality person, who looks for density, tolerance and test details. If those are missing, the board stalls at the forward.

  • “Mobile is the main screen”

    Workshop owners and dealers visit on a phone, at the counter or on site. Pages must load plainly, show the board clearly and make the sample form short to fill.

  • “A dealer locator closes the gap”

    A carpenter who likes a board needs to know who stocks it nearby. Without a clear dealer page, the enquiry goes to a competitor whose dealer is easy to find.

What we do

What we deliver for MDF manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Board and use pages

    A page per board and per job, with thickness range, finishing notes and a link to the guide.

    Result: Every board has a page a buyer can read and share.

  2. Technical download area

    Specification sheets and test notes, with key facts also written on the page.

    Result: A quality person can verify the board from the site.

  3. Sample request form

    A short form for board, thickness, use and address, feeding the shared record.

    Result: Each sample request arrives complete and logged.

  4. Dealer locator

    A page listing dealers by city with contact details they have approved.

    Result: A buyer finds a nearby dealer in a single step.

  5. Export page

    A section for importers with specifications, packing and sample plan.

    Result: An overseas buyer finds what they need to request a quote.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The pages an MDF buyer looks for before asking for a sample.

Board types and what each is for
One page per board with thickness, finish and use. A buyer from a kitchen firm lands on the board that fits the job.
Technical data sheet download
A sheet the quality person can attach to a file. Keep it as a page too, so search can read it.
Request a sample
A short form asking thickness, sheet size and delivery town. It is the main action on the site, so keep it above the fold.
Find a dealer near you
A locator by town or pincode. It sends the workshop buyer to the dealer and shows your network.
Plant and testing
Photographs of the line and the lab, with test methods. A buyer looking for a long-term supplier wants to see the plant.
Export enquiries
A page naming grades, port and documents. An importer decides whether to write after reading it.

Who it is for

This is written for these MDF manufacturers.

  • Plain MDF producers for furniture factories
  • Pre-laminated MDF and prelam board makers
  • HDHMR and moisture-resistant board producers
  • Fibreboard makers supplying door and moulding factories
  • Thin MDF and HDF producers for flooring and door skins
  • MDF units supplying packing, speaker and craft markets
  • Export-focused MDF manufacturers
  • MDF processors that offer cut-to-size and edge-banded panels

Before you decide

When this may not be the right fit.

  • Your range and rates change and nobody can update pages, so a new site would show stale boards within a short time.
  • The plant does not sell outside a small area, and a national site would invite enquiries you decline.
  • You have no data sheet or test report to publish, and a site of photographs alone looks the same as any dealer's.

Before you decide

Agree the work. Know how to judge it.

Website for MDF manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from MDF manufacturers. Anything missing is noted in the written scope, with who will supply it.

Current datasheets for every board
Dated sheets for each board you sell. Pages are written from them. Without a sheet, the board gets a short page without figures, which a quality person will distrust.
Domain and hosting logins
Access to the domain and hosting under your own email. Without it, we cannot publish, and the launch waits. We also need to know who last renewed the domain, since an expired domain takes the site and the email with it.
Photographs of boards, edges and plant
Clear pictures of faces, cut edges and the plant. If none exist, a shoot is planned and pages carry placeholders, which look unfinished to a buyer.
A confirmed list of dealers
Dealers who agree to be shown, with towns and contact. Without confirmations, the locator is empty and a buyer cannot find where to buy. Dealers who do not stock every grade should say which they hold, or the locator sends buyers on a wasted trip.
Your decision on showing rates
Whether any rate appears online. If undecided, the site shows none and asks for a sample or a call.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Gather the datasheets and the product list

    We begin with your product list and the datasheet for each board: sizes, density, moisture class and uses. You tell us which are current and which are discontinued. The datasheets are scanned and listed so every figure on the site has a source. What exists afterwards is a content inventory that the technical head has already looked at. Where a datasheet is older than the board now in production, it is marked for the technical head to reissue before it is used.

  2. 2

    Sketch the pages a purchase head would open

    We draw the site map in the order a buyer needs: board and use pages, the technical download area, the sample request, the dealer locator and the export page. You correct it from what your sales team is asked. Pages nobody would use are cut. The map is approved before design starts.

  3. 3

    Check the design on a workshop owner's phone

    We show the board page and the sample form on a phone first, since a bigger share of visits come that way. You tell us what feels slow or crowded. The page is tested on a weak signal. Colours and logo follow your identity. Design is signed off by you after seeing it on the phone.

  4. 4

    Build the dealer locator from your own list

    You give us the dealers you want listed, with town and contact, and we build the locator. Each dealer confirms how they wish to appear. Dealers without confirmation are left out. The locator links to the sample form so a carpenter who finds a dealer can still request a piece. The locator also records which dealer stocks which grade, so a carpenter looking for a moisture-resistant board is not sent to a shop that only holds plain MDF.

  5. 5

    Upload the content to a test site and review

    The board pages, technical area and export page are filled on a test copy. Your technical head reads every figure, and your sales head tests the forms. Changes are made on the copy, not the live site. You sign off the copy as a whole before it goes live.

  6. 6

    Go live, test every form, hand over access

    At launch we submit the sample form from a phone and a laptop and check that each request reaches the record with a source. You receive logins in your own name and a note on how to change a datasheet. After the season, we compare sample requests from the site with the figures recorded before the work.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What should be on the home page?
The boards, the jobs they suit, the sample button and the dealer locator. A visitor should see within a screen what you make and how to test it, not a long company history.
Can the site show rates?
That is your decision. Some plants share rates only by enquiry because they change by volume and dealer terms. We can build a rate request route that records who asked and for which board.
Should the site show our rates?
Rates change with raw material and freight, so keep them off public pages and offer a quote against a request. A visible rate becomes a quote from last month, and buyers hold you to it. Show sizes and grades instead.
Do dealers get their own login?
Not at the start. A login needs someone to manage accounts and reset passwords, which some plants cannot do. Begin with a dealer locator and a shared download page, and add a login once the team can run it.
Should dealers get a login on the site?
Only if there is something dealers need that a public page cannot give, such as dealer-only price lists or order status. A login adds work: accounts to create, passwords to reset, and content to keep current. Begin with a public dealer page and a downloadable card set. If dealers ask for more, add a private area later. We set the site so a login can be added without a rebuild.
Who updates the site when a board changes?
Name one person in your technical or marketing team who owns updates, and we show them how to edit a datasheet and a page. A site that nobody updates shows old boards and old sizes, and a quality person notices. We hand over a short guide at launch and list which pages carry which figures, so a change in the datasheet leads to the right pages.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.