Skip to content
GullySales

Metal finishing companies · WhatsApp marketing

Use the phone your buyers already hold to show a finish and agree a lot.

WhatsApp marketing for a metal finisher is using one business number to show photographs, confirm samples and keep repeat lots moving. GullySales sets up the account, the message wording and the permission rules.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What WhatsApp marketing means

WhatsApp marketing is sending updates, offers and reminders to customers on the app most Indian buyers already check daily. GullySales sets up business WhatsApp, writes the message templates and keeps the list consented and current.

Last updated 14 Nov 2026.

For metal finishing companies

Where it usually goes wrong, and what we would do.

  • “Buyers send a photo before they send a part”

    A maker snaps the part and asks if you can polish it. A reply with a matching finished photograph and a clear next step wins more than a long explanation on a call.

  • “Shop-floor numbers mix with personal ones”

    When owners and polishers use personal phones, enquiries scatter and history leaves with the person. One business number with a named person behind it keeps every thread findable.

  • “Broadcasts need permission”

    Sending finish offers to everyone in a contact book annoys the buyers you want to keep. Messages go to people who have asked or agreed, and the platform's current rules apply.

  • “Photos of customer parts are private”

    A maker may not want a new product forwarded. Keep each customer's thread separate and never share their parts with another buyer without asking.

What we do

What we deliver for metal finishing companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A business account set up

    A WhatsApp Business profile with the shop name, finishes offered, address and a short greeting.

    Result: A buyer sees what you do before the first reply.

  2. Saved replies for common questions

    Replies for finishes, metals, lot size, pickup and the sample route.

    Result: Staff reply to routine questions in one voice.

  3. A photo library of finishes

    Approved images of each finish, ready to send when a buyer asks.

    Result: A buyer gets proof of a finish in the first reply.

  4. A permission-based customer list

    Contacts who agreed to hear about festive capacity or new services, with a record of the agreement.

    Result: Only contacts who agreed receive a message.

  5. Sample and pickup confirmations

    Message wording for sample received, finish approved and pickup date agreed.

    Result: Each step of a job has a written confirmation.

How the result is measured

  • Messages delivered
  • Reply rate
  • Enquiries from WhatsApp

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What the shop's WhatsApp should ask for and send back.

Photograph of the part
Asked for in the first reply with the metal and finish wanted, so the shop can answer with a matching finished image.
Matching finished photograph
A picture of a similar part finished by the shop, sent with the next step, which is to send a sample.
Saved answers on pickup
A reply on collection routes and areas, kept ready so the person on the number need not ask the owner.
Lot ready message
A note when the lot is finished, with the count and the finish, so the buyer can arrange collection.
Permission to message
A record of who agreed to hear from the shop. Check the platform's current rules before sending festive capacity notices.

Who it is for

This is written for these metal finishing companies.

  • Buffing and polishing shops for utensils, cookware and cutlery
  • Deburring and edge finishing for machined and stamped parts
  • Vibratory and tumbling finishers for small parts
  • Shot blasting and sand blasting units
  • Brushed, satin and linishing finishers for stainless steel
  • Electropolishing and mirror finishing specialists
  • Brass, copper and aluminium finishing for fittings and decorative work
  • In-house finishing units that take outside work

Before you decide

When this may not be the right fit.

  • The shop's number sits on the owner's own handset, and no one else could read or answer it.
  • Nobody checks messages while the polishers are working, so enquiries would wait.

Before you decide

Agree the work. Know how to judge it.

WhatsApp marketing for metal finishing companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Describe how the contact list was collected, what people asked to receive, and which messages are currently sent. Include opt-outs and replies when reviewing campaign performance.

Make the scope clear

Agree the audience, message purpose, sending system, and response owner. Separate promotional communication from order or service updates, and check current platform requirements before launch.

Check the work in use

Test the message with a small appropriate audience before wider use. Check links, reply handling, opt-outs, and whether the response leads to a relevant conversation or order.

Know when to change course

Do not use an unexplained contact list as a shortcut to demand. If recipients do not expect the message, resolve the permission and relevance questions before sending.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal finishing companies. Anything missing is noted in the written scope, with who will supply it.

A separate business phone number
A SIM in the shop's or the owner's company name, kept at the shop. A personal number mixes work with family and goes with the person. If one is not available, we decide on a new number first. Register it under the shop name and keep the SIM where it can be found if the phone is lost.
Photographs of finished pairs
Images of raw and finished parts, clear and permitted. They are the strongest thing a finisher can send. Without them, the library is empty, and the first photographs come from the bench. Each image is named by finish and metal, so the clerk picks the right one in seconds.
Past buyers who agreed to updates
Customers who asked for updates or said yes in a chat. Others are not messaged. If none is recorded, the list starts from the next sample. A short note of when and how each buyer agreed is enough.
A rule on who answers
The owner, the supervisor or the clerk, and what happens at lunch and at night. A buyer who sends a photograph and hears nothing moves to the next finisher. Write it on a sheet near the phone, so cover is clear when someone is away.
Permission to show customer parts
A yes from any buyer whose part appears in a reply. A photo of one maker's part sent to another is a breach of trust. If permission is missing, use sample plates. A yes in a chat is kept as a screenshot or a line in the register. Without that yes, the buyer stays out of the update list until a later chat gives one.

How it works

How the whatsapp marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the photographs buyers already send

    We open the shop's chats and look at how parts and finishes arrive: a photo of a rejected piece, a master, a drawing. You show us which numbers are used. We note which messages stalled for lack of a reply and which became samples. We also look for chats where a photograph was sent but the part and finish were never named, because those are the ones the saved replies must catch.

  2. 2

    Separate the shop number from personal ones

    The shop gets one business number with a profile, hours and address. The owner's personal phone is left alone. We move chats that belong to the shop and agree who holds the device. The profile description names the finishes in the words buyers use, and the address matches the map listing.

  3. 3

    Write saved replies for the common questions

    Replies for what you finish, minimum lots, pickup, how a sample works. The clerk tests them on real chats and edits the wording. You approve the set, and each reply asks for the metal, the finish and the quantity. We add a reply for the buyer who asks for a rate with no part details, asking for the metal, size and quantity.

  4. 4

    Build a photo library of finishes

    A set of images of raw and finished pairs, sample plates and packed lots, saved so they can be sent in a tap. The supervisor picks them. Customer parts appear only with permission. Pictures are saved at a size that opens on a weak signal, and each is named by finish.

  5. 5

    Keep a list of consenting buyers

    A column or label that records who asked for updates and when. Only they receive messages about festive capacity or a new finish. You hold the list, because it protects the number from complaints. We write a plain first message that says who is writing, why and how to stop receiving updates.

  6. 6

    Confirm samples and pickups by message

    A short confirmation goes to the buyer when a sample is finished and when a lot is ready, with a photograph. We compare the chats that led to lots with the earlier count and show you which replies worked. The clerk sends these at the same point each time, so a buyer learns what to expect from the number.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Can we message old customers about festive capacity?
Yes, for customers who agreed to receive your messages. Keep the message about their own past work, and give them a simple way to stop messages. Check the platform's current rules.
Should the owner or the supervisor answer?
The person who can describe the finish and commit to a pickup. A reply from someone who cannot discuss the surface sends the buyer to another shop.
Can we message old customers about festive capacity?
Only those who agreed to hear from you, and with something useful, such as booking space ahead of a busy period. A broadcast to everyone gets the number blocked. Check the platform's current rules and keep the message to the shop's real availability.
Should the owner or the supervisor answer?
The supervisor, with the owner reading the log. The supervisor knows which finishes the shop can do and can ask the right questions. The owner joins for rates and complaints, so the enquiry does not wait for the owner to leave the floor.
Is it all right to message old customers about spare capacity?
Only customers who have consented to hear from you. A message to someone who did not ask can get the number reported and blocked. Send to buyers who asked for updates or who sent work recently and replied in the chat. We keep the consent column and write a short note that says who you are and what is on offer. See the platform's current rules on business messages first. If a buyer asks to stop, the label is changed at once.
Should the supervisor or the owner answer?
Whoever can read a photograph of a part and judge the finish. In some shops that is the supervisor, with the owner handling rates. We split the saved replies by person so a buyer gets a technical answer from the bench and a rate from the owner. The label shows who has the chat, so nothing is answered twice. A buyer who sends a photograph should get an answer from someone who can read it.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.