Skip to content
GullySales

Metal stamping companies · CRM

Keep every drawing, die quote and approval stage in one place.

A CRM for a stamping company records each plant, contact, part and quote so nothing sits in a salesperson's phone. GullySales sets up the stages to match a stamping job, from drawing received to production part approved, and trains the team to keep it current.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For metal stamping companies

Where it usually goes wrong, and what we would do.

  • “A quote has two prices and one history”

    The die quote and the piece price travel together, and a buyer may revise either. A record that holds only a total hides which number moved. Keep both lines, the date and the volume they assumed.

  • “Approval is a sequence, not a status”

    Drawing, tooling quote, order, try-out, first article, production part approval and first schedule are separate steps. A CRM with Open and Closed hides where a job is stuck.

  • “Accounts carry several contacts”

    The same plant has an engineer, a quality head and a purchase head, each with a different view. When one leaves, the shop loses the relationship unless every contact is recorded against the plant.

  • “Dependence on one account is a number worth seeing”

    If a single plant takes the larger share of the press hours, the owner should see it each time the sheet opens. A simple view by account shows the exposure before a schedule is cut.

What we do

What we deliver for metal stamping companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stage design

    Stages that match a stamping job from enquiry to production approval, agreed with the sales team.

    Result: The tracker reflects how jobs move in your shop.

  2. Quote record

    Fields for die cost, die ownership, piece price, yearly volume and the revision date.

    Result: Each quote can be compared with the one before.

  3. Account and contact view

    Plants with every contact, part and open quote against them.

    Result: A change of contact does not lose the account.

  4. Import of existing quotes

    Past quotes and contacts from spreadsheets and email loaded into the system.

    Result: The tool starts with your history, not a blank screen.

  5. Team routine

    A short guide on who updates what after each call and audit.

    Result: Entries stay current without chasing.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The stamping fields that keep tooling, quote and approval in one history.

Part number and revision
Entered by the estimator. Lets anyone find the right drawing after a revision and prevents a quote on an old version.
Die quote and piece price
Two separate fields entered by the quoting person. Allows a later revision to be compared line by line.
Tool owner and tool status
Buyer-owned, shop-owned, new or transferred. Updated by the tool room. Shows what can run at once and what needs a build.
Approval stage
Sample, first article, audit, approved. Updated by quality. Shows where each account sits in the sequence, not just a status.
Contacts by role
Engineer, purchase head and quality head, each with a name. Entered by sales so that each role gets the right message.
Share of press hours
Updated by the owner per account. Makes dependence on one or two customers visible.

Who it is for

This is written for these metal stamping companies.

  • Auto component stampers supplying two-wheeler and four-wheeler plants
  • Appliance and white goods sheet metal press shops
  • Electrical and switchgear stamping units making lamination, terminals and enclosures parts
  • Progressive die shops making small brackets and clips in high volume
  • Deep draw and drawn component makers
  • Fine blanking and precision blanking shops
  • Press shops offering secondary operations such as tapping, welding and plating
  • Job-work press shops serving other fabricators

Before you decide

When this may not be the right fit.

  • Your quotes are made by one estimator who remembers every buyer, and a shared record would add entry work without changing anything.
  • Nobody will update the approval stage after an audit, so the record would show the wrong state and mislead the desk.
  • You need press scheduling and not a sales record, and a CRM would not solve the shop-floor plan.

Before you decide

Agree the work. Know how to judge it.

CRM for metal stamping companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal stamping companies. Anything missing is noted in the written scope, with who will supply it.

Every list of plants and quotes
The record starts from what you hold. Gather phone books, quote files and mail. Anything left out stays invisible to the desk.
The terms you use for tool ownership
Who owns the die, where it is kept and who pays for repair differs by customer. Bring the usual terms. Without them the quote record has no field for this and disputes begin from memory. A line on who pays for die repair at short notice makes the record far more useful.
A history of approvals by part
Approvals are a sequence, not a status. Bring the dates you remember for first article and production approval. Without them the stages cannot be set from your real practice. Include the date a tool was handed over, if you hold it.
A clerk who will make the entries
Someone in the office must enter quotes and stage changes as they happen. Name that person and a cover. If nobody is named, the record is filled once and left to age.
A figure for each account's revenue
The concentration view needs the share of sales per plant. A rough sheet from accounts is enough. Without it the dependence on one customer cannot be shown.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one part from drawing to approval

    We take one recent part and trace it through your office: the drawing, the tooling quote, the piece price, the first article, the plant audit and the production approval. You tell us where details got lost. What exists afterwards is a drawn path in your own terms, which the record has to follow. We also mark where a revised drawing arrived by chat or mail and was not matched to the open quote, because that is where a wrong price gets sent.

  2. 2

    Agree the stages of a stamping job

    With your sales head we write the stages in the order a job really moves, such as drawing received, tooling quoted, tool ordered, first article sent, production approval and regular schedule. You rename them. Each stage has an exit and a next step, so a part cannot sit in one place unnoticed.

  3. 3

    Split the quote into tooling and piece price

    A stamping quote carries two prices and one history. We design the quote record so the tooling cost, the piece price, the volume assumed, the material and the die ownership terms are held separately. You choose which of these a salesperson must fill in before the quote is sent.

  4. 4

    Load accounts, contacts and open quotes

    We collect the quote files, phone books and mail, clean duplicates and load them, linking several contacts to one plant. You check a sample of accounts against what you know. Errors found now are fixed in the import, so the first view the owner sees can be trusted. Parts that several plants buy are linked, so you can see the spread of one part across accounts.

  5. 5

    Run the sales desk on the record

    Your people log live quotes and approvals while we watch. You see which fields are skipped and which stages confuse. We change the set-up where the desk struggles. When the trial ends, the notebook stops being the main record.

  6. 6

    Show the owner the spread of accounts

    We build one view that shows revenue by plant and by sector, so the owner sees how much rests on any one account. You say what you want to read. Using the quote list counted at the start, you and your sales head then see how many open quotes have an owner and a next step.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet enough?
For a small team, a well built sheet works. Move to a CRM when several people quote, or when follow-ups are missed. We set up whichever suits the size of the shop.
Which CRM should a stamping shop pick?
Choose one the sales team will actually open. Zoho and HubSpot are in ordinary use in India. Check each product's current plans and rules before committing.
Can the record help us see a customer slipping away?
Yes, if each account carries its parts, last order and share of press hours. A fall in release schedules shows up before the line goes idle. The owner can then call the engineer, not wait for the purchase head to report it.
How do we record a tool that belongs to the buyer?
Add a tool owner field and a tool status field to the part record. Buyer-owned tools carry maintenance and insurance questions that shop-owned ones do not. The tool room can then see which dies it must keep ready, and whose they are.
Which fields does a stamping quote need?
Record the plant, contact, part name and number, material and thickness, tooling price, piece price, volume assumed, die ownership terms, validity and the next step. Add a field for the drawing revision, since a changed revision changes the quote. Keep the list short enough that a salesperson can fill it on a phone. We cut any field that the desk skips in the trial. If your accounts system already carries part numbers, copy the numbering so the two agree, and decide who may edit a rate.
What if a customer holds the tool and we only press the parts?
Record that as a status of the part, with the owner of the die, where it sits and who maintains it. The quote then shows only the piece price and perhaps a maintenance charge. This matters because a customer who owns the tool can move it to another shop, and your records should show the risk. Agree with your adviser how tool ownership and any agreement are recorded in your own papers, since the CRM is a working record, not a contract.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.