Skip to content
GullySales

Metal stamping companies · Search engine optimisation

Be the press shop a search for a stamped part brings up.

SEO for a stamping company is the work of making your site appear when a buyer searches for a part, a process or a sector, such as a progressive die component or a deep drawn cover. GullySales works on the part family pages, the page structure and the technical basics that let a search engine read them.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What search engine optimisation means

Search engine optimisation (SEO) is the work of getting your website to appear when a buyer searches Google for what you sell. GullySales builds pages around real search terms, fixes technical issues that block ranking, and tracks which searches actually bring enquiries.

Last updated 14 Nov 2026.

For metal stamping companies

Where it usually goes wrong, and what we would do.

  • “Buyers search for the part, not the shop”

    A vendor development engineer types a deep drawn cup, a busbar terminal or a lamination, not a company name. A site with one page titled Products gives the search engine nothing to match against those words.

  • “Process words need their own pages”

    Progressive die, compound die, fine blanking and deep draw are different jobs with different buyers. Putting them on one page makes a page that matches none. Give each process a page with the parts, materials and thickness range you run.

  • “Photographs without text are invisible”

    A strong picture of a die on the bolster says nothing to a search engine. Name the file, write the caption with the part and process, and put the same words in the page heading so both reader and crawler understand it.

  • “Old catalogue PDFs rank in place of the site”

    A scanned brochure uploaded years ago can outrank the current page and show an old press list. Replace it with a page, redirect the file and keep one current version.

What we do

What we deliver for metal stamping companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Part family page plan

    A list of pages, one per part family and process, mapped to the words a buyer uses.

    Result: You know which pages the site is missing.

  2. Page titles and headings rewritten

    Titles and headings that name the part, the process and the material in plain words.

    Result: Each page says what it is about in its first line.

  3. Image names and captions

    Die and part photographs renamed and captioned with the part and process.

    Result: Pictures support the page instead of sitting on it unlabelled.

  4. Technical review of the site

    Speed on a phone, broken links, duplicate pages and old PDFs listed and fixed in order.

    Result: A short list of faults that you can check one by one.

  5. Search ranking record

    The words you target and where the pages stand, noted on a set date and revisited later.

    Result: You can compare positions against the starting note.

How the result is measured

  • Ranking positions
  • Organic traffic
  • Enquiries from organic search

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The searches that bring a purchase engineer to a press shop.

progressive die stamping components
A page for progressive die parts giving the sheet thickness range, the part size, the press tonnage and a photograph of a strip.
deep drawn components manufacturer
A deep draw page with the shapes, draw depth ratios you achieve and the materials, with a drawn sample photographed on a plain surface.
sheet metal press shop for auto parts
A page for auto buyers describing the approvals you hold, the parts you run and how a first article is submitted.
lamination and terminal stamping electrical
A page for electrical parts naming the materials, the tolerances and the plating you handle in-house or through a partner.
press tool design and die making
A tool room page listing the dies you build, the steel you use and the machines in the shop, aimed at buyers who want tooling too.
second source for stamped brackets
A page for buyers who need an alternate vendor, setting out how a part transfer, a trial and a first article are handled.

Who it is for

This is written for these metal stamping companies.

  • Auto component stampers supplying two-wheeler and four-wheeler plants
  • Appliance and white goods sheet metal press shops
  • Electrical and switchgear stamping units making lamination, terminals and enclosures parts
  • Progressive die shops making small brackets and clips in high volume
  • Deep draw and drawn component makers
  • Fine blanking and precision blanking shops
  • Press shops offering secondary operations such as tapping, welding and plating
  • Job-work press shops serving other fabricators

Before you decide

When this may not be the right fit.

  • Your shop does only job work for a few fabricators and has no wish to take direct buyers, so ranking for part searches would bring enquiries you cannot serve.
  • You cannot photograph parts because customers bar it, and a page with no images would lose to listings that show a part.
  • Your site is an old PDF catalogue with no one to update it, so new pages would be written once and never kept current.

Before you decide

Agree the work. Know how to judge it.

SEO for metal stamping companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring the pages for the products or services you want to sell, the search queries available in your reports, and examples of enquiries from search. Separate branded searches from buyers discovering you for the first time.

Make the scope clear

Agree which pages and technical fixes come first, who can publish changes, and who supplies subject knowledge. Link search work to a relevant enquiry route on each priority page.

Check the work in use

Follow the trail from a relevant query to its landing page and then to an enquiry. Review whether those enquiries fit your offer, alongside indexing and search visibility.

Know when to change course

A ranking movement alone is not a buying signal. If traffic grows but relevant enquiries do not, revisit page intent and the offer before producing more pages.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from metal stamping companies. Anything missing is noted in the written scope, with who will supply it.

Photographs of parts you are allowed to show
Pages need real parts, not stock images. Bring photographs of parts you can name, or of generic samples that carry no customer mark. Without them the pages show tools and presses only, which reads thin to a buyer.
The list of materials and thicknesses you run
Buyers search by material and gauge as well as by part. Bring your usual range from the job cards. Without it, pages state processes but give no figure an engineer can compare.
Admin access to the website
We need to read and, with approval, change the pages. Hand over the login or arrange a shared session. If the site was built by someone who has left, tell us now, because recovering access later holds up every page.
Your certificates and audit documents
A quality page needs facts: the system you follow, the instruments you own, the reports you issue. Bring copies. Without them the page makes no claim and shows less than your competitors.
A rule on which customers can be named
Some customers allow a mention and others do not. Tell us which names are cleared. Without a rule, we write about sectors and keep every customer anonymous.

How it works

How the search engine optimisation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List the parts and processes you run

    We start from your catalogue, job cards and the photographs on your phone, and write down every part family, material and process the shop performs, such as blanking, piercing, drawing, tapping or welding. You strike what you no longer do. What exists afterwards is a list of pages that could be built, each tied to real capability.

  2. 2

    Owner-level access to the website and listings

    You give us the website login, the search console and any directory entries that carry the shop's name, or sit with us while we look. We search for your parts as a purchase engineer would, and note which directories and old catalogues come before your own site.

  3. 3

    Agree the order of the part family pages

    With your sales head we decide which families to build first, taking the ones with free press time and the ones plants ask for again and again. You choose between, say, deep drawn covers and progressive brackets. The agreed order is written down so nobody argues about it midway.

  4. 4

    Write the pages with the die and quality heads

    For each family we draft a page that states the process, the material range, the presses and the checks, using what your die maker and quality head tell us. They read each draft and correct it. A page goes live only after that read, because an engineer will compare it with your audit.

  5. 5

    Publish, then fix titles and image names

    We publish the pages, rewrite titles and headings, name the photographs and add short captions so a search engine can read them. You open the pages on a phone and tell us what a vendor development engineer would find confusing. Old catalogue files are moved or noted.

  6. 6

    Read the enquiries against the starting record

    At the start we noted the enquiries that came through search and which parts they named. We now set the new enquiries beside that note, part family by part family. Which pages to extend is your call with your sales head. We state what happened and give no ranking promise.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Can you promise a first page ranking?
No. Rankings depend on competition, the age of the site and the search engine's own rules. We work on pages and fixes that are within your control and record where each page stands.
Do we need a blog for this?
Not first. Part and process pages answer the search a buyer makes. A post on a die design problem or a material choice can follow once those pages exist.
Customer parts are confidential. How do we write part pages?
Describe the part family, the material, the thickness and the process, and photograph a sample you own or a generic part. Never show a customer drawing. Buyers search by process and material, which you can give without exposing anyone's design.
Which pages should a press shop build first?
Build one for each part family you run best, such as progressive die brackets or deep drawn housings. Each needs material, thickness, press tonnage and a sample photograph. Buyers search by part and process, so a general page about stamping would answer none of them.
Should we put the old catalogue PDF on the site?
Put it on the site only after we have turned its contents into pages, and keep the file as a download for those who want it. A PDF is read poorly by a search engine and can outrank the page you want found, so we link it from the page, not the other way round. Check that the PDF carries no customer part you are not allowed to show. If the catalogue is out of date, retire it and replace it, since a purchase engineer who finds an old press list will assume the shop has not moved on.
How do we show tool room capability without giving away designs?
Show the equipment, the process and the kind of tool, with generic images such as a bare die set or a bolster with no customer part visible. State the tonnage, the machines in the tool room and the checks done, and leave the part drawings out. A buyer wants to see that you can build and maintain a die, not to read a design. If a customer has allowed a photograph, note the permission before using it. Ask your customer's quality team when in doubt.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.