Skip to content
GullySales

Natural stone manufacturers · Website

Build a site where every stone has a page, a sheet and a way to ask for a sample.

A website for a natural stone manufacturer is the place where a specifier checks the stone, the finish, the size and the sample route before contacting you. GullySales works on stone pages, downloadable sheets, daylight photographs and the forms that start a sample request.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A builder and supervisor inspect paving blocks in a materials yard

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For natural stone manufacturers

Where it usually goes wrong, and what we would do.

  • “The site is read as a sample drawer”

    A designer opens the site to compare stones. A page per stone and finish, with clear photographs and sizes, behaves like a drawer of samples they can pull out and look at.

  • “Photographs carry the argument”

    Natural colour is the main reason a stone is chosen. Photographs in daylight, laid and close up, dry and wet, convince better than any paragraph, and poorly lit shots send the specifier to a competitor.

  • “The technical sheet is the real destination”

    Architects look for a file to drop into a specification folder. A site that hides sizes and tolerances in a catalogue image forces a phone call that the buyer would rather not make.

  • “The site is opened on a phone at the site gate”

    Contractors and site engineers check details on mobile data. Heavy images and slow pages lose them, so the pages have to load on a modest connection.

What we do

What we deliver for natural stone manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A page for every stone and finish

    Pages with photographs, sizes, thickness, uses and a clear next step, built to a consistent layout.

    Result: Every stone you sell can be found and compared.

  2. Downloadable specification sheets

    One-page sheets for each stone with sizes, tolerances, finish and tests held, linked from the stone pages.

    Result: An architect can download and file the sheet in one step.

  3. A sample request form

    A short form that records the project, the stone, the finish and the delivery address and sends it to a named person.

    Result: Each request is logged and owned from the start.

  4. A project and quarry section

    Consented photographs of finished work, the quarry and the cutting floor, with the stone and finish named.

    Result: A buyer can see the source and the stone in use.

  5. An export and small-order page

    A page for importers and another for small buyers, each with the right route and terms.

    Result: Different buyers reach the right route at once.

  6. A phone-first build

    Images sized for mobile data and pages tested on a modest phone connection.

    Result: The site loads at a site gate.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

A stone site is searched like a sample drawer, stone by stone.

Kota stone tile sizes and thickness
Answered by a stone page listing the sizes and thicknesses you cut, with the finish photographs and a sample button.
sandstone technical specification sheet
Answered by one downloadable sheet per stone and finish, carrying the figures from your own testing.
stone cladding panels supplier
Answered by a cladding page with panel formats, laid walls and the lot variation note an engineer wants.
small order natural stone
Answered by a small-order page that states your minimum and how a garden contractor can buy a few pallets.
stone quarry location and process
Answered by a quarry page with photographs and a short description of how blocks become tiles, which builds trust with a distant buyer.

Who it is for

This is written for these natural stone manufacturers.

  • Sandstone producers and processors
  • Kota stone and limestone cutting units
  • Slate and quartzite producers and wall cladding suppliers
  • Cobble, paver and kerbstone producers
  • Shahabad and other regional stone processors
  • Stone cladding and ledge panel manufacturers
  • Garden stone, boulder and outdoor feature stone suppliers
  • Export-led natural stone processors

Before you decide

When this may not be the right fit.

  • You have no sheets or test figures to attach, so a specification page would have nothing for the engineer.
  • You cannot photograph the stone laid, and a site of yard images would lose the architect.
  • You have not decided your minimum order, so the small-order page would promise something you cannot meet.

Before you decide

Agree the work. Know how to judge it.

Website for natural stone manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from natural stone manufacturers. Anything missing is noted in the written scope, with who will supply it.

Photographs of every stone in daylight
The site is read as a sample drawer, so photographs carry the argument. Bring daylight images of each stone and finish, dry and wet, close up and laid, each file named with the stone and the finish. Where missing, we plan a shoot at the yard or at a finished site, and the page is held until it is done instead of carrying a stock image of a stone you do not sell.
Specification sheets as files
Bring the technical sheets for each stone, in a file that can be downloaded, with the date, the lab and the stone block tested. We publish only what the sheet states, in the sheet's own words. If sheets are missing or out of date, the pages describe the stone and make no claim about performance until a current sheet exists.
Domain, hosting and current site access
Check who holds the address and the hosting, and which email address receives the renewal notice. A developer may hold them. We plan a transfer to the company before building, since a site on an address you do not control is a risk to every printed card and quotation that carries it.
Your decision on showing rates
Choose whether the site shows rates, ranges or neither. Only you can. We build the pages to suit your decision, and write the form to ask for rates where they are not shown.
A quarry and works story you can verify
Bring facts about the quarry or works you can stand behind: location, how stone is cut, how it is packed and loaded, and which unit finishes it. A supplier who can say where a block came from is easier to trust. We write nothing beyond what you confirm.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the site as a specifier at the gate

    We look at your current site on an ordinary phone, as a site engineer might, and try to find one stone, its finish, its sizes and how to get a sample. We record each tap, each wait and each place we gave up, with screenshots, so the launch can be compared to them. You tell us what the site must do for the sales team that it does not do today.

  2. 2

    List stones, finishes and the files each needs

    From your range, we list every stone and finish with the sizes, the photographs and the specification sheet each needs. You decide which stones appear now. The list becomes the sitemap, and also shows where photographs or sheets are missing. The works manager also marks which stones are quarried by you and which are bought in, so the page names an origin truthfully.

  3. 3

    Agree the sitemap and sample form

    We design a sitemap with a page for each stone and finish, a project and quarry section, an export and small-order page and a sample request form. You approve the pages and the form fields. The form asks only what the works needs to pack a box.

  4. 4

    Fill the test site and check facts

    We write the pages in a test site, with your daylight photographs and downloadable sheets. The works manager checks sizes, finishes and tolerances page by page. Any claim your test reports do not support is removed, and the sales head reviews the project section.

  5. 5

    Test the phone build and the form

    We open the test site on several phones, including a basic one on a slow connection, and send sample requests through the form. We check where each request lands and who sees it. You approve the launch only after a real request reaches the right desk.

  6. 6

    Launch, then read requests against the old site

    After launch, we hand over the logins and compare the downloads of sheets, sample requests and enquiries against the figures from the first step. You decide which pages to expand, which photographs to replace and whether to show rates.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What range of stones should the site show?
All the stones you actively sell, each with its finishes. A stone with no page is a stone a specifier cannot find.
Can we show prices?
That is your decision. Stone sellers either show a starting range or leave rates to a quotation, and we build either with a clear quotation route.
Do we need a new site or can you fix the current one?
We look at the current site first. If it can carry the stone pages, sheets and forms, we build on it, and if not, we say so.
Should the site be built for the phone?
Yes. Site engineers and contractors open the page on a phone at the gate or the yard. A heavy page that loads slowly on mobile data loses them, so keep photographs compressed and put the sample form near the top.
Can the site take orders online?
It can take sample requests and enquiries, which suits stone bought by specification and quotation. Taking full orders online is rarely the right fit, since sizes, finishes, lots and delivery are agreed with a salesperson. We build the request form so that it starts that conversation with the details the sales team needs.
Does the site need more than one language?
Only if buyers need it. A site in English for architects and importers is normal, and a regional-language page can reach contractors in your region. You decide after looking at where enquiries come from. We write the English first and add a second language only for pages that will be read, and your sales team confirms that someone can answer enquiries in it.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.