Skip to content
GullySales

PCB assembly companies · Follow up systems

Chase the quote, the first article and the second lot on purpose.

A follow-up system for a PCB assembly company is the set of dated steps after a BOM is quoted, after a first lot is delivered and before a reorder is due. GullySales writes the steps, the wording and the reminders so that follow-up does not depend on one person's memory.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For PCB assembly companies

Where it usually goes wrong, and what we would do.

  • “A quote goes silent for good reasons and bad ones”

    The buyer may be waiting on funding, comparing three shops or has simply stopped replying. A polite question about where the project stands separates the live from the dead. Without it, the estimator never knows.

  • “The first article is the best time to ask for the next”

    When a buyer receives working boards, the buyer is ready to talk about the next lot. A call at that point, asking how the boards performed and when the next lot is planned, produces a date to record.

  • “Quality complaints are a follow-up too”

    A rejected board handled promptly and clearly can keep a customer. One ignored loses them. A system that logs the complaint, the response and the closing note gives the buyer confidence.

  • “Dormant customers are cheaper to reach than new ones”

    A customer who built a lot a while ago and then went quiet still knows your work. A short, specific message about a capability that has changed is a fair reason to reopen the talk.

What we do

What we deliver for PCB assembly companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Follow-up steps for each stage

    What is sent or asked after the quote, after the first article, after delivery and before the expected reorder date.

    Result: Each stage has a defined next action and an owner.

  2. Message scripts

    Short messages for email and WhatsApp that ask a real question and avoid pressure.

    Result: The sales person starts from a tested wording.

  3. Reminder set-up

    Reminders in the CRM tied to quote dates and reorder dates.

    Result: The account owner sees each due follow-up on the day.

  4. Complaint log

    A record of each quality complaint, the response and the date closed.

    Result: You can show a customer how a complaint was handled.

  5. Dormant customer list

    Customers with no order for a while, with a reason to contact each.

    Result: You hold a list of named customers to reopen.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Send a note at each stage from quote to second lot.

Each moment below has a message and a line to record. Timing follows the buyer's build, not a fixed gap.

Quote sent
A message that confirms the lot size, turnkey or consigned route and the parts flagged as short. Records the contact who will decide.
Part shortage found
A message listing the part, the alternates offered and who must approve. Logged so the buyer's reply is on file.
First article shipped
A note asking the engineer to check the boards and report anything found. The reply and any fault go into the complaint log.
Second lot prompt
A message to the buyer before the likely reorder, asking about volume and any revision. Needs a named account owner.
Lost quote
A courteous note that records the reason given and the price quoted by the rival if the buyer shares it.
Dormant customer
A short message to a buyer who has not reordered, referring to the last board and asking if a new revision is planned.

Who it is for

This is written for these PCB assembly companies.

  • Prototype and low-volume SMT assembly shops for startups
  • Turnkey assemblers who source components for OEMs
  • Consigned-parts assembly for brands that buy their own components
  • High-mix, low-volume lines for industrial and medical electronics
  • Automotive and EV electronics assemblers
  • Box-build and final assembly providers with enclosure and harness work
  • Contract manufacturers for consumer and IoT products
  • Rework and repair houses for expensive boards

Before you decide

When this may not be the right fit.

  • Nobody owns the quote once it leaves the estimator, so reminders would be set and ignored.
  • You do not record complaints, so a first-article note would invite feedback you cannot track.
  • You plan to promise a delivery date in each follow-up, when the date depends on part availability that you do not control.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for PCB assembly companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from PCB assembly companies. Anything missing is noted in the written scope, with who will supply it.

A list of quotes sent and how they ended
We use it to find the reasons for silence. A spreadsheet is enough. Without it, the sort is built from memory and may miss a pattern. Add the notes where the buyer gave a reason, because those teach us which silences were about price and which were about files.
Customers who have not ordered recently
The dormant list starts from your order history. An export from accounts is acceptable. If it is not shared, the dormant customer step is left out. Add the last board each customer ordered, so a message can refer to it by name.
Reminder tool and access to it
Reminders live where staff look. We need to see the tool you use. If none, we choose a simple one with you before building.
Your rule on who may promise a fix
Complaints go wrong when an executive promises what the line cannot do. Name who decides. Without that, the log records the complaint and no reply is written.
Your first-article routine
The first article is the best time to ask about the next order. Describe who sends it and who calls. If there is no routine, the step is written as a proposal for you to adopt. Include who calls the customer after the first article and what is checked on that call, so the next-order question follows a real conversation.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read how quotes ended last year

    A quote goes silent for good reasons and bad ones. We take a sample of quotes and mark how each ended: ordered, lost on price, lost on lead time, buyer disappeared. You and your estimator tell us what you remember. Each reason is written beside the quote it came from, so the follow-up steps that come next are chosen from what happened and not from a general idea of buyers.

  2. 2

    Choose the follow-up for each quiet reason

    A buyer waiting for a design freeze needs a different message from one comparing a cheaper shop. We list the reasons and agree which follow-up fits each. You approve the list and decide who sends.

  3. 3

    Write the scripts for calls and messages

    Each script asks one question tied to the quote, such as whether the BOM changed or whether parts will be consigned. Your sales head corrects the tone. We avoid any wording that repeats the last message. Where a buyer is waiting on a design change, the script asks for the revision date and offers to hold the quote open until the new files arrive.

  4. 4

    Set reminders and test them on live quotes

    Reminders are set against quote stages, with an owner and a next step. We run several real quotes through them and watch whether staff see and act. Wrong owners or duplicate reminders are fixed before the whole team uses them. We also set a rule for who may close a quote, so a reminder does not keep appearing on a job that is finished.

  5. 5

    Log complaints and first-article feedback

    A quality complaint is a follow-up too, so we build a complaint log with an owner, and a first-article check that asks for the next order while the board is fresh. You decide who may promise a fix.

  6. 6

    Read quiet quotes and dormant customers against the baseline

    We compare quotes revived and dormant customers who ordered again with the starting figures. You decide which scripts to rewrite and which dormant customers to call yourself.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When does follow-up become too much?
Stop when the buyer says no or the project has plainly ended. Between those points, each message should add something, such as an answer or a new option. Repeating the same question is the mistake.
Should a quote chase go to the buyer's inbox or their WhatsApp?
Use the channel the buyer used to send the BOM. Engineers differ: some prefer email for files and WhatsApp for quick questions. Follow their lead and keep a copy of any WhatsApp exchange in the record.
What do we say to a buyer who chose a cheaper shop?
Say thank you, find out what tipped the decision, and write it down. Leave the door open for the next board. The reason given is useful data for how you quote the next one.
What do we say to a buyer who chose a cheaper shop?
Thank them, ask what decided it, and leave the door open for the next lot. Price is a common stated reason, but the buyer may also mention lead time on parts or a missing sample. Record the answer; it shows what the next quote must explain.
How do we follow up a quote that lost on price?
Thank the buyer, ask what the winning quote covered, and note the reply in the record. Do not argue the price. Some buyers return after a first order elsewhere goes wrong, so keep the relationship warm with a note about the checks you run and a reminder of the files you hold. Set a reason for the next contact and a date, agreed with your sales head.
What do we say to a buyer who chose a shop that is faster?
Acknowledge that they had a deadline, say that you could not match it without cutting a step you will not cut, and describe the step in plain words. Do not promise a time. Offer to look at the next board earlier, when the schedule is not tight. Record the reason, because the dormant customer list will use it, and your planner can see how frequently schedule decides.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.