Skip to content
GullySales

Plasma cutting companies · Lead generation

Fill the table with plate jobs from buyers who need thick cuts, not price checks.

Lead generation for a plasma cutting shop means reaching the fabricators, equipment makers and contractors whose work is thick plate, and getting a drawing and a weight from them. GullySales builds the capability page, the enquiry route and the outreach list that bring those buyers to your phone.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For plasma cutting companies

Where it usually goes wrong, and what we would do.

  • “A rate-per-kilogram call is not yet a lead”

    The buyer who rings only to ask the rate may be comparing three shops from a list. A lead is a buyer with a drawing, a plate thickness and a date. The shop that asks for those three things on the first call turns a price check into a job.

  • “Structural contractors buy in bursts”

    A pre-engineered building contractor needs base plates and gussets in volume when a project starts, then goes quiet. Finding the next project before it begins is lead generation. Waiting for the phone to ring only catches the contractors who are already late.

  • “Equipment makers need the same part again”

    An attachment maker or implement maker orders the same brackets and plates repeatedly. One such buyer is worth more than a dozen one-off callers, yet they rarely search online. They are found by visiting the stockyard belt and asking who cuts for whom.

  • “Thick plate is the filter”

    A laser shop cannot take heavy plate, so those buyers have fewer options near them. Saying plainly which thicknesses and bevels your table handles sends the right buyers to you and spares the calls that never fit.

What we do

What we deliver for plasma cutting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A buyer list by trade

    Structural, boiler and tank, earthmoving, agricultural and general workshop buyers near your yard, each with a contact and the plate they use.

    Result: A sheet with one row per buyer and a column for the plate size they last used.

  2. A first-call question card

    Three questions for every enquiry: drawing, thickness, date needed. Printed beside the phone and pinned in the shared chat.

    Result: Every call ends with the three answers written down or a note on what is missing.

  3. A capability page built for the search

    A page that names the table size, thickness limit by metal and bevel work, so the right buyer sees a fit before ringing.

    Result: A page that answers the opening questions of a call.

  4. Outreach to project-based contractors

    A short message to contractors about to begin a phase, offering table time for their plate.

    Result: A log of who was contacted, when, and what they replied.

  5. An enquiry register

    One place for every enquiry, its source, its file and its outcome.

    Result: A register where each lead shows where it came from.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What a plate-cutting enquiry needs before a rate is named.

Drawing file or sketch
A DXF or a dimensioned sketch lets the estimator measure cut length. Without it the rate is a guess, so ask before quoting.
Plate thickness and grade
Mild steel, stainless or other. Thickness decides if plasma suits the job and what the table can cut.
Plate size and quantity
Sheet size against the table limit, and how many parts. It sets nesting, machine hours and the minimum lot.
Who supplies the plate
The shop's own stock or the buyer's. Record it, since uncertified plate causes disputes later on test papers.
Bevel or finish needed
Whether edges are bevelled or cleaned. It changes the machine used and the price per metre.

Who it is for

This is written for these plasma cutting companies.

  • CNC plasma job-work shops for local fabricators
  • Plate cutting units near steel stockyards
  • Structural and pre-engineered building contractors' cutting partners
  • Boiler, pressure vessel and tank fabricators' cutting suppliers
  • Earthmoving attachment and agricultural implement cutting shops
  • Flange, ring and base plate cutting units
  • Plasma shops that also bevel and profile heavy plate
  • Workshops supplying machine frames and fixtures in plate

Before you decide

When this may not be the right fit.

  • Your table is booked at every hour, so more enquiries would only be answered with a wait.
  • You have not written the plate size and thickness your table can take, so enquiries would include jobs you cannot cut.

Before you decide

Agree the work. Know how to judge it.

Lead generation for plasma cutting shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from plasma cutting companies. Anything missing is noted in the written scope, with who will supply it.

Last year's quotation file and register
We need the quotes sent, with plate thickness, weight and the outcome beside each. They show which buyers convert and which only compare rates. If the file is partial, a rough sort from memory with the estimator will do, and the buyer groups will be marked as estimates until real entries accumulate.
Photographs of cut plate on the table
Bring clear photographs of thick plate being cut and the finished edges, taken in daylight on a phone. The capability page and the outreach messages rely on real work. Without them, we use only text and a plain drawing of the table size, which convinces fewer fabricators.
A decision on minimum job size
Only the owner can say whether the shop takes a single small plate or only lots above a certain weight. We write the rule into the first-call card. If the rule is missing, small jobs crowd the table and the register fills with enquiries nobody wants to answer.
The mobile number buyers actually call
We need to know which number is answered during working hours, who answers it and what happens when the line is busy. Outreach will send buyers to this number. If calls go unanswered or reach a switched-off phone, the route is repaired before any message is sent.
Names of five buyers who send repeat work
Give us the contractors or equipment makers who return, and their usual plate. They teach us the pattern of a good buyer and become the model for the outreach list. If none repeat, the list is built from the trade groups alone, and the first months are treated as a test.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort last year's plate enquiries by buyer

    We start from the enquiries your phone and WhatsApp already hold, and you sort them with us into structural contractors, vessel shops, equipment makers and general workshops. This shows which buyers send thick plate and which only ask for a rate. You mark the ones that became jobs, and we record the count of each group as the starting figure.

  2. 2

    Set the thickest plate you will cut

    Before any outreach, you decide the plate thickness and table size the shop will say yes to, and the jobs it will politely decline. We write this down as the filter every enquiry meets first. Without it, the shop collects calls it cannot serve, and the later figures mean little.

  3. 3

    Draft the first-call question card

    We sit with whoever answers the phone and turn the questions they already ask into one card: material grade, plate size, quantity, drawing format, certificate need and delivery point. You correct anything that does not match how the shop quotes. The card is printed and kept beside the phone.

  4. 4

    Build the buyer list for outreach

    We list contractors, fabricators and equipment makers within truck distance of the shop, using your past buyers as the model. You strike out names you will not serve, and add those you know personally. The list is kept in the enquiry register, not in a stranger's file.

  5. 5

    Send a test drawing through the route

    We send a sample enquiry through the capability page, the call and the WhatsApp number, and watch who picks it up and what is written in the register. You fix whatever slipped. Only then do the page and the outreach go live.

  6. 6

    Read the register against the starting count

    We open the enquiry register beside the figures recorded at the start and compare enquiries received, drawings sent, quotes issued and jobs won, by buyer type. You decide which buyer group deserves more outreach and which source to drop. We report what the register shows and promise nothing beyond it.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which buyers are worth chasing first?
Start with those who already buy heavy plate: structural contractors, tank and vessel shops and attachment makers. They have thick work every time and little choice nearby. General workshops can follow once the first group is on your register.
Are paid ads a must for generating leads?
Not as a starting point. Maps, a capability page and direct outreach reach buyers who already need thick plate. Paid search can be tested later against a single service, but check it brings drawings, not only calls.
How do we know which source sends the best leads?
Write the source on every enquiry in the register, then look at which sources produced booked jobs, not only calls. The sources that bring drawings and repeat orders are the ones to feed.
Should a plasma shop accept every drawing it receives?
No. Accept drawings that fit the table, the thickness and the tolerance you can hold. Declining the rest politely protects your time. A drawing outside your limits is a lead for another shop, so note why you declined.
Who answers the enquiries once the route is live?
Someone in the shop must, and you choose who. We do not take the calls. We give that person the question card and the register, and show how a drawing is logged. If the same person is also on the shop floor, we suggest a fixed hour for returning missed calls, so a fabricator is never left waiting a full working day without a reply.
Where does a lead vendor we already pay fit in?
Keep them for now and let the register tell you what they send. We add a source column so every enquiry is marked by where it came from. After the first set of entries, you compare the vendor's enquiries with your own channels on drawings sent and jobs won, and decide whether to renew. We do not ask you to cancel anything first.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.