Skip to content
GullySales

Plasma cutting companies · Social media

Show the plate, the cut and the finished lot so buyers remember your shop.

Social media marketing for a plasma cutting shop is showing the work in places where fabricators, contractors and equipment makers already look. GullySales plans a small set of posts built from your real jobs, and helps you decide which platform deserves your time.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For plasma cutting companies

Where it usually goes wrong, and what we would do.

  • “The buyers sit on a few platforms”

    A structural contractor or workshop owner is more likely to be on a video platform or a professional network than on a photo-sharing feed. Choose one or two platforms where trade buyers watch, and ignore the rest.

  • “A cut edge makes a good picture”

    The spray of the arc, the clean edge on thick plate and a stack of labelled parts are visually strong. Short clips of the table running do more than a stock photograph, and they show the buyer the process they would be paying for.

  • “Private jobs need permission”

    A part cut for a named customer may carry their drawing or marking. Ask before posting, and crop out anything that identifies a client. Posting without asking costs more trust than the post could win.

  • “Posting without a purpose is wasted effort”

    A post that ends without a way to reach you gives the viewer nothing to do. Each post should carry the thickness, the metal and a single step: send the drawing to the shop's number.

What we do

What we deliver for plasma cutting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A choice of platforms

    A recommendation of one or two platforms based on where your buyers spend time.

    Result: A short note naming the platforms and why.

  2. A bank of post ideas from real jobs

    Ideas for posts: a thick plate cut, a bevel prepared for weld, a lot ready for dispatch.

    Result: A list of ideas each tied to a job you have done.

  3. A photo and clip routine

    A simple way for the floor team to capture images safely during normal work.

    Result: A shared folder with new material added after each job.

  4. A caption format

    A repeatable layout stating thickness, metal, quantity and how to send a drawing.

    Result: A template used on every post.

  5. A permissions note

    A short rule about asking customers before showing their work.

    Result: A written rule kept at the front desk.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

Posts a plasma shop can plan around the plate.

A thick plate being cut
A short clip of the torch moving through heavy plate, with the thickness written in the caption.
Finished parts on a trolley
A photo of nested parts with the drawing beside them, so buyers see accuracy.
Before and after bevel
Two images of a plate edge, plain and bevelled, with the angle noted.
A large job loaded out
A truck loaded with cut plate, shared with the buyer's consent.
Table size and limits
A graphic of the sheet size and thickness the table takes.

Who it is for

This is written for these plasma cutting companies.

  • CNC plasma job-work shops for local fabricators
  • Plate cutting units near steel stockyards
  • Structural and pre-engineered building contractors' cutting partners
  • Boiler, pressure vessel and tank fabricators' cutting suppliers
  • Earthmoving attachment and agricultural implement cutting shops
  • Flange, ring and base plate cutting units
  • Plasma shops that also bevel and profile heavy plate
  • Workshops supplying machine frames and fixtures in plate

Before you decide

When this may not be the right fit.

  • Nobody can answer the messages posts bring, so reach would only collect unread chats.
  • Your buyers ask that their drawings stay private, so the feed would have few parts to show.

Before you decide

Agree the work. Know how to judge it.

Social media marketing for plasma cutting shops: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from plasma cutting companies. Anything missing is noted in the written scope, with who will supply it.

Admin access to existing business pages
Bring the logins or the email addresses behind them. If a page exists with an unknown admin, say so. We need control of the pages before posting, or the work is built on an account that can vanish with someone's phone. Also tell us whether the shop name is already taken on a platform, so we choose a matching handle before any post goes out.
A list of clients who allow their parts shown
Ask regular buyers whether their finished parts may appear, and note the answer. Some fabricators dislike their designs being shared. Without consent, we post only generic parts and shop views, and the stock of posts is smaller.
A phone with a clean lens and storage
One workshop phone, wiped of dust and with free space, is enough. Smoke and spark residue blur a lens fast. If photographs are poor, the posts look worse than silence, and we advise waiting until the equipment is cleaned. A tripod or a simple stand helps, because steady footage of a finished edge reads better than a shaky video of the whole table.
The name of one person who posts
Someone in the shop must take photographs and send them to us, and it cannot be the operator while cutting. If no one can be named, we reduce the plan to a handful of posts from your own visits, and tell you the reach will be small. This person should also be able to reply to a message on the page, or forward it to the estimator on the same day.
Safety rules for photographs on the floor
Tell us where the camera must not go: near live torches, under suspended plate, close to the gas cylinders. We build the routine around those limits. A photograph that puts a person at risk is never worth posting, and we will not ask for one.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Ask which platforms buyers already use

    We ask your estimator and your regular buyers where they see work: a WhatsApp group of contractors, LinkedIn for equipment makers, YouTube for clips, Instagram for photographs. You choose one or two. We record the shop's current followers and posts, so the later reading has a baseline. We also ask whether any buyer already follows the shop, since an existing audience tells us where the first posts should go.

  2. 2

    Get admin access to the shop's pages

    We need the login or admin role on each account, or we create them with you as owner. You name the person who approves posts. If a former employee made the page and left, we recover it first, because posts from an account the shop cannot control are a risk. We record who holds the recovery email and phone for each account, so access survives a change of staff or a lost handset.

  3. 3

    Sort your jobs into postable and private

    We go through recent work and mark which can be shown. Parts for a named client need that client's consent, and drawings are never shown. You tell us the sensitive ones. What remains becomes the pool of real posts, and anything doubtful is left out. The list is kept in the shop, so the person posting can check it before sending anything to us for a draft.

  4. 4

    Set up a phone routine for the floor

    The operator or helper takes a short clip or photograph at fixed points of a job: plate loaded, cut under way, finished edge, parts stacked. We show how to frame the shot safely, away from sparks and the torch. The routine sits inside the normal work, not beside it. The operator confirms the angle first, because a clip filmed at the wrong distance shows nothing useful about the edge or the plate.

  5. 5

    Write captions in the shop's own voice

    We draft captions that name the plate, the process and the part, in plain sentences. You read each before it goes out. We check the platform's current rules for business accounts, and avoid any claim you cannot back with a photograph or paper. Each caption also states the plate type and the part name in the buyer's own words, so a contractor scanning the feed recognises the job at once.

  6. 6

    Match followers to enquiries received

    We compare the first figures with the platform insights and the enquiry register: followers, post views, messages and drawings that arrived after a post. You tell us which of those became quotes. We drop post types that brought nothing and keep those that did, promising no particular reach.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need to post every day?
No. A steady, modest rhythm of real jobs is better than daily filler. Choose a number you can keep up with, and check the platform's current rules and formats before planning.
Should the owner appear on camera?
It is a choice. Buyers trust a face that explains the job, but the work itself is the main subject. If the owner prefers not to appear, a voice over the table footage works well.
Can social media bring contractors?
It keeps your name in front of people who already know the trade, and it gives a contractor something to forward to a colleague. Direct outreach still does the first introduction.
Do contractors follow plasma shops on social media?
Some do, mostly on LinkedIn and WhatsApp groups. They want proof of thick-plate work, not a daily feed. Post a few strong jobs and give each a clear way to send a drawing.
Can staff appear in the posts?
Only if they agree and the shop owner approves. A face on the floor builds trust, but some operators prefer not to be shown, and safety gear must be visible. We ask each person, record the answer, and keep a note of who consented so nobody is shown by accident or surprise.
Do we pay for boosted posts?
Not at the start. We first see whether organic posts bring any messages from buyers. If a paid test is later wise, it is run on one platform with a small amount you set, and the result is checked against the register of drawings received. We do not recommend spending until the posts are sound.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.