Skip to content
GullySales
GullySales
Tell us what you need

Plastic extrusion companies · Website

Give dealers and fabricators a site that answers size, finish and terms.

A website for an extruder is the factory's own place to show products, specifications, documents and a way to ask for a rate. GullySales works on product pages by size, a downloadable catalogue, a clear enquiry form and the trust papers a project buyer asks for.

Tell us what you needor call +91 80958 58589

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Also for plastic extrusion companies

Sales and marketing for plastic extrusion companies, the overview.

Last updated 13 Nov 2026.

For plastic extrusion companies

Where it usually goes wrong, and what we would do.

  • “Visitors arrive with a size in mind”

    A dealer or contractor looks for a particular diameter, section or thickness. A site built around company history makes them hunt, and a site built around sizes lets them confirm in moments.

  • “A rate request form that asks too little wastes the lead”

    An enquiry with only a name and phone makes the desk call back for details. A form asking product, size, quantity and delivery town lets the first reply carry a real quote.

  • “Project buyers look for proof before price”

    A purchase head wants licence copies, test reports, factory details and past supply. A documents page, kept current, answers these before the first call.

  • “Phone-first visitors need a short path”

    Dealers browse on a phone. Product pages, a call button and a WhatsApp link must work on a small screen with weak signal, or the visitor goes back to search.

What we do

What we deliver for plastic extrusion companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Product pages by pipe class, profile and sheet

    Each page with sizes, thickness, colours, lengths and pack quantity, plus an enquiry button.

    Result: A visitor confirms a size on one page.

  2. A downloadable size-wise catalogue

    A printable sheet matching the site, dated so the version in a dealer's phone is clear.

    Result: Dealers can save and share the same catalogue.

  3. An enquiry form built for quoting

    Fields for product, size, quantity, buyer type and delivery town, feeding the desk's record.

    Result: The first reply can carry a real quote.

  4. A documents and credentials page

    Licence copies, test reports and factory details laid out for tender buyers, with only papers you hold.

    Result: A purchase head finds the papers without asking.

  5. A mobile-first layout with call and WhatsApp

    Large buttons, light pages and a short path from product to enquiry.

    Result: The site works on a basic phone.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Read the full website design and development page

Searches your buyers type

Each page should end in a rate request that asks what the desk needs.

HDPE pipe sizes and pressure classes
A table for the contractor's purchase head, ending in a form that asks for class, length and delivery town.
uPVC profile colour and finish
A page with photographs of finished sections in the colours the shop makes, and a sample request for the fabricator.
conduit pipe catalogue download
A catalogue file by size for dealers, with the date it was prepared so a stale copy is easy to spot.
extruder licence and test papers
A documents page listing what the shop holds and offers on request. Keep it to papers that are in hand.
pipe dealer enquiry for my town
A dealer page asking for district and expected volume, so the desk can reply with the right person and terms.

Who it is for

This is written for these plastic extrusion companies.

  • PVC and HDPE pipe extruders
  • Agricultural drip and irrigation pipe makers
  • Electrical conduit and cable duct extruders
  • uPVC window and door profile extruders
  • Plastic sheet and board extruders
  • Tube and hose extruders
  • Edge band and trim profile makers
  • Co-extrusion and multilayer sheet specialists

Not for

It is not the right fit if.

  • The size-wise catalogue does not exist and nobody can prepare it, so a site would have nothing for dealers to download.
  • You sell to a handful of known dealers by phone and they do not use search, so the site would not add buyers you need.

Before you decide

Agree the work. Know how to judge it.

A website for plastic extruders: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from plastic extrusion companies. Anything missing is noted in the written scope, with who will supply it.

The size-wise catalogue in an editable form
A catalogue in a spreadsheet or document lets us build the product pages without retyping. A PDF will do. Without it, we copy from datasheets and the process is slower. Mark the sizes that are in regular production and those made against an order.
Photographs of products and the line
Clear pictures of finished lengths, sections and the factory give the site proof. Phone images in daylight are acceptable. Without them, the site uses fewer pictures. Include a few photographs of finished lengths with a tape or a scale in the frame, so the size is visible.
Test reports and credentials you hold
Copies of reports and approvals, confirmed by your consultant, go into the documents page. We do not list any you cannot show. If a report is for an older batch, say so, and we will date it on the page.
Control of the domain and email
The owner must hold the domain registration and the email account. A former vendor's name on either will delay launch. If control has been lost, recovery with the registrar comes before any build, and we tell you what proof of ownership the registrar will ask for.
A decision on showing rates
Decide whether the site shows any rate at all. A short note is enough. If no decision is made, we show none, and the pages carry sizes, grades and the route to ask for a rate, which is how dealers expect to buy.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List what a project buyer looks for

    We begin by listing what dealers, fabricators and project buyers each look for in a visit: sizes, finish, documents, terms, a way to ask for a rate. You and the technical person confirm what the plant can state. The list becomes the scope of the site. Sizes that the plant makes only to order are noted separately, so they are not shown as stock.

  2. 2

    Gather catalogue, photographs and papers

    You give us the catalogue, product photographs, test reports and any certificates. We check each against what you can show. A credential the plant does not hold is not mentioned. Gaps are noted for a photograph session. We also ask for a short statement of what the plant makes and from which resins, in the technical person's own words, which becomes the introduction.

  3. 3

    Approve the sitemap and one product page

    We lay out the site by pipe class, profile and sheet, and design one sample product page. You and the sales head review it on a phone and a laptop. Changes are made before other pages are built. The sample page also shows how a size table is set out so a dealer can find a line on a phone without scrolling sideways.

  4. 4

    Design the rate request form

    We build the enquiry form to ask what a quote needs: size, section, colour, quantity, delivery town and credit terms. The sales head tries it with real enquiries. Mobile-first buttons for call and WhatsApp sit beside it. We add a field for a project name and a drawing or a bill of quantities, for contractors, as an optional upload.

  5. 5

    Read the test site with the technical person

    The pages go on a test site only your team can open. The technical person reads every size and standard mention against the datasheets. The sales head sends test enquiries. Corrections are made before launch is discussed. Pages that cite a standard are held back until the consultant has confirmed the claim in writing.

  6. 6

    Launch, check, and hand over logins

    You approve the final text and address. We make sure old links lead to the right new pages, release the site and test the form and phone view. Later we read the enquiries with the sales head against the starting counts. Old marketplace and directory links are pointed at the right pages, and the owner receives the logins and a list of what sits where.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Tell us what you need
How many pages does an extruder site need?
One for each product group buyers search separately, plus pages for documents, about the factory and contact. Size tables can sit together on one page.
Can the site show rates?
Only if you want to. State the basis and date beside any figure, or ask visitors for size and quantity and reply with a quote.
Do we still need the marketplace listing?
It remains a source of enquiries. The site is your own place for specifications, documents and dealer information, and the two support each other.
Do we need a page for every size of pipe?
No. Group sizes by class and use on one page, with a table of sizes and a form. A separate page suits a product that a buyer searches for by itself, such as a conduit or a profile section.
Do project buyers need a separate section?
Yes, a short one. A contractor's purchase head or consultant looks for documents before price: test reports, product details, approvals your consultant confirms, and your experience in supplying projects. We make a documents page for these and link it from the product pages. It avoids burying the papers inside a dealer-style catalogue, and it gives the sales head something to send in reply to a tender enquiry. The documents page is linked from the product pages and from the enquiry confirmation, so a tender team finds it when it needs it.
Will our own people be able to edit the site?
Yes. We set up the product pages and the catalogue so a trained person on your side can change text, add a size or replace a photograph without us. We show that person how in a short session and hand over every login. Changes to the layout or the enquiry form are best checked with us first, but everyday content belongs to your factory. Sizes, photographs and the catalogue are things the factory can change itself, while structure and the enquiry form are best changed with us.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

More for plastic extrusion companies

Related work to consider.

Closest to this: search and visibility

Also for plastic extrusion companies

Or start from the overview: sales and marketing for plastic extrusion companies.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.

Tell us what you need