Skip to content
GullySales

Polyurethane component manufacturers · Lead generation

Turn each worn roller or wheel in a plant into a trial request you can quote.

Lead generation for a polyurethane caster means finding the maintenance heads and purchase desks whose parts are wearing out, and getting a worn sample from them. GullySales works on the pages, listings, dealer packs and enquiry sheets that bring in those requests.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For polyurethane component manufacturers

Where it usually goes wrong, and what we would do.

  • “The lead is a worn part, not a brochure request”

    A maintenance head who sends a damaged idler or screen panel has told the caster the duty, the size and the failure in one object. Enquiry channels should invite that sample first, because a part in hand is worth more than a general interest in elastomers.

  • “Remote plants hear of a caster from a dealer”

    A quarry or mill far from town does not search the web before it asks the equipment dealer or spares trader. Those intermediaries are lead sources, and they need a pack, one named contact and a reason to name your shop.

  • “Unqualified enquiries cost the foreman a day”

    Without questions about load, speed, medium and temperature, the shop quotes blind and casts a trial in the wrong hardness. A short duty sheet at the first contact separates a serious trial from a price check.

  • “Re-coating is a separate lead with its own owner”

    A mill that owns worn rollers is not shopping for new parts. It wants the core recovered, so the message, the page and the person who answers all need to treat re-coating as a repair job.

What we do

What we deliver for polyurethane component manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A worn-part trial request form

    A short form asking for the part, the plant, the machine and the failure, with room for a photograph from a phone.

    Result: Every trial request arrives with the part type and duty already written down.

  2. Duty questions on the first call

    The same set of questions used on the phone, on the website and on WhatsApp, so a hardness is never suggested blind.

    Result: Your foreman holds a filled sheet before any compound is chosen.

  3. Dealer and spares trader referral pack

    A one-page sheet for equipment dealers, conveyor makers and spares traders, with the parts you cast and a single contact.

    Result: A dealer has something to hand over when a plant asks for a local caster.

  4. Lead source register

    A simple list recording whether each enquiry came from a listing, a dealer, a visit, a repeat plant or the website.

    Result: You can see which source brought each trial request.

  5. Separate re-coating enquiry route

    A page and a call script for mills and plants that want their own rollers recovered.

    Result: Re-coating requests are logged apart from new-part requests.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Capture the duty details that let you quote a polyurethane part without guessing.

Part and its position
Ask whether it is a roller, wheel, liner or bush and where it sits. The position decides the shape, the load and the wear.
What wore out the last one
Record whether it cracked, wore flat, swelled or lost its bond. The failure points to a different hardness or a better core.
Core supplied or cast new
Note whether the plant sends its metal core for re-coating or wants a complete part. It changes the job and the quote.
Load, speed and temperature
Ask for what the plant knows: the weight carried, how fast it turns, and the heat or oil nearby.
Drawing, sample or photograph
Record which one arrived. A sample can be measured, while a photograph needs a follow-up before anyone prices it.

Who it is for

This is written for these polyurethane component manufacturers.

  • Casters of conveyor rollers, idlers and pulley lagging for mines and cement plants
  • Makers of polyurethane screens and panels for sand and aggregate screening
  • Wheel and castor casters for material handling and trolleys
  • Liner and wear plate makers for hoppers, chutes and pumps
  • Bush, coupling and vibration pad makers for machinery
  • Printing, textile and paper mill roller coating shops
  • Makers of polyurethane seals and scrapers for hydraulic and conveyor use
  • Re-coating services that recover worn customer rollers

Before you decide

When this may not be the right fit.

  • Your foreman is also the person who answers calls, so every vague enquiry would pull them off the pour.
  • You cast only to a customer's own drawing and have no way to measure a sample, so a worn-part request form would promise a service you do not offer.

Before you decide

Agree the work. Know how to judge it.

Lead generation for polyurethane component makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from polyurethane component manufacturers. Anything missing is noted in the written scope, with who will supply it.

The dispatch register for two years
We need part names, customers and dates from the dispatch book or the invoicing software. A photographed ledger page is acceptable when it can be read. When it is missing, the source count begins with the first new enquiry and cannot be compared with the past.
A list of dealers and spares traders
Write down every trader who has sent you work or asked for your price list, with the town and the plants each serves. A phone contact list is enough. Without it, the referral pack has nobody to go to and the dealer route is left switched off.
Photographs of worn parts and finished parts
Bring phone pictures of worn parts you have received and the replacement you cast, with the plant name removed if the customer has asked. They show a buyer what the trial involves. Missing pictures mean the request form carries drawings only.
The foreman's time for the question sheet
The person who talks to maintenance heads must go through the duty questions and cross out any that a plant will not answer. We cannot judge this from the office. If the foreman is busy, the form stays short and the missing details are asked on the call.
A decision on trial samples
Decide whether the first trial part is free, charged at cost or charged in full, and who may approve it. Bring the rule in writing. Until it is settled, our form tells the buyer that terms are given on the call and promises nothing.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the trial and order book together

    We sit with your sales head and the dispatch register and list every part you cast for the last two years: roller, wheel, liner, screen, bush. For each we note who asked first, a plant, a dealer or an old customer. You tell us which accounts began with a worn sample. That gives a plain picture of where trials come from.

  2. 2

    Sort sources into plants, dealers and re-coaters

    From the book we group the sources: maintenance heads who rang direct, spares traders who passed on an enquiry, and mill owners who sent a roller for re-coating. Each group gets its own owner on your side. We agree what counts as a lead in each group, so the foreman is not asked to chase a casual caller.

  3. 3

    Write the worn-part request form and duty questions

    We draft one form that asks what a visiting maintenance head can answer from the plant floor: the machine, the old material, the load, wet or dry, oil or heat, and a photograph of the worn part. Your foreman reads every question and strikes out what cannot be used. The same questions become your script for the first call.

  4. 4

    Build the dealer and trader referral pack

    For the spares traders who already send you work we put together a short pack: the parts you cast, the duty questions a dealer should ask before passing on a name, and how a referral is recorded. A dealer sees how an enquiry will be handled before agreeing to send one. Nothing is promised on commission until you decide it.

  5. 5

    Send a test enquiry through every route

    We submit a worn-part request from the website, from a directory listing and by the dealer route, and ring the number given. You watch who picks up, how long the call takes to reach the foreman and what is written down. Gaps are fixed before any paid listing or mailing starts, because a mistaken first reply wastes a trial.

  6. 6

    Read the source register against the first count

    Once trials begin, each enquiry is logged against its source in the register. We compare it with the count taken at the start: enquiries, samples received, trials fitted and orders placed. You decide which route to widen, which dealer to visit and which listing to drop. The register, not the loudest caller, decides where the next effort goes.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we chase every enquiry that arrives?
No. Chase the ones that name a duty and a part. A price-only message gets the duty questions first, and the answer shows whether a trial is worth casting.
Where do trial requests come from for a caster?
From maintenance heads who found you through a listing or search, from dealers who name you, and from plants that already buy. The register shows which of these actually brings requests in your own shop.
How do we handle a buyer who wants an exact copy of an old part?
Ask for the worn part or a drawing, not a description. A copy depends on the original dimensions, and a worn part has changed shape. Measure the core or the housing, then confirm with the buyer before casting, since the old part may itself have been the problem.
Is a trial request worth chasing if the quantity is one?
Yes, if the part is a standing item. One roller on a conveyor means a line of them, and the trial shows whether the plant will reorder. Record the line it belongs to and ask how many identical positions the plant has.
Should the form ask for the quantity a plant needs?
Ask for it, but do not reject an enquiry that says one piece. A single roller or screen panel is how a trial begins at a plant, and the quantity grows after the part has passed a run. Put the quantity beside the duty questions so the foreman reads both together. Mark a one-piece enquiry as a trial in the register, so the owner sees it was wanted and not neglected.
Who should reply to a dealer's enquiry first?
The same person who replies to a plant, using the same duty questions, and in the dealer's presence if the dealer asks. If the dealer's customer is contacted behind the dealer's back, the dealer stops sending names. Agree with each dealer, before the first referral, whether you speak to the plant directly or through them, and record the agreement in the register beside the dealer's name.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.