Skip to content
GullySales

Polyurethane component manufacturers · Social media

Post the pour, the part and the trial, so a plant sees what your shop can cast.

Social media for a polyurethane caster is a place to show real casting work to maintenance heads, dealers and engineers who follow industrial trades. GullySales works on what to post, which platforms suit a B2B shop and how posts lead to a worn-part enquiry.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For polyurethane component manufacturers

Where it usually goes wrong, and what we would do.

  • “Industrial buyers watch process, not slogans”

    A short video of a mould being poured or a roller coming out of the oven shows skill that a slogan cannot. Plant engineers stay with posts that show the wear part and what it replaced.

  • “LinkedIn reaches purchase and plant staff”

    Purchase managers, mechanical heads and engineering consultants spend time on LinkedIn, while YouTube holds how-to videos and Instagram suits shop-floor photographs. Pick the one or two platforms where your own buyers already look.

  • “Trial results are the strongest post”

    A fitted part and a plant's comment, shared with consent, tells the next buyer more than any claim. A post without the customer's permission is a risk, so the permission is part of the routine.

  • “Posts without a next step go nowhere”

    A photograph of a roller is pleasant but unconnected to sales. Each post should point to a worn-part trial request or to the catalogue, so interest turns into an enquiry.

What we do

What we deliver for polyurethane component manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A platform choice note

    A short note on which platforms fit casters selling to mines, mills and plants, and which to skip.

    Result: You know where your shop will post and where it will not.

  2. A bank of post ideas from the shop floor

    Ideas drawn from pours, finished parts, trials and re-coating jobs, with a photograph brief for each.

    Result: The person with the phone knows what to capture on a normal working day.

  3. A consent step for customer parts

    A simple line asking the plant for permission before a part or result is shown, and a record that it was given.

    Result: Every customer part you post has the plant's agreement on file.

  4. Company page and profile setup

    A complete company page with parts cast, industries served and a route to the trial request.

    Result: A buyer who opens your page sees what you cast and how to ask.

  5. A reply routine for comments and messages

    A short guide on who answers a message from a plant and how the duty questions are asked.

    Result: Messages from buyers reach the person who can quote.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

Plan posts that put the pour, the cured part and the trial on show.

A pour from mould to demoulding
A short clip of the casting, with the part and the hardness named in the caption, shot with the foreman's agreement.
A worn roller beside its replacement
Two photographs side by side, with the plant's name removed and a note on what wore the old one.
A hardness test on the shop floor
A close-up of the shore hardness reading on a finished part, with a line explaining what the figure means for the buyer.
A trial fitted at a plant
A post that shows the part installed, only after the plant has agreed to be shown, with a caption on the duty.
A question from a maintenance head
A reply post that takes one real question about hardness or bond, removes the plant's name and answers it plainly.

Who it is for

This is written for these polyurethane component manufacturers.

  • Casters of conveyor rollers, idlers and pulley lagging for mines and cement plants
  • Makers of polyurethane screens and panels for sand and aggregate screening
  • Wheel and castor casters for material handling and trolleys
  • Liner and wear plate makers for hoppers, chutes and pumps
  • Bush, coupling and vibration pad makers for machinery
  • Printing, textile and paper mill roller coating shops
  • Makers of polyurethane seals and scrapers for hydraulic and conveyor use
  • Re-coating services that recover worn customer rollers

Before you decide

When this may not be the right fit.

  • Your customers forbid photographs inside their plants, and your own shop is too cluttered to film.
  • No one has time to reply to comments and messages, so a busy feed would collect questions that go unanswered.

Before you decide

Agree the work. Know how to judge it.

Social media marketing for polyurethane component makers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from polyurethane component manufacturers. Anything missing is noted in the written scope, with who will supply it.

Photographs from the floor on your phones
Collect every picture of castings, moulds and finished parts already on the owner's, foreman's and salesperson's phones. Do not edit them. We choose from what exists, and without any pictures we schedule a visit before we can plan a single post.
Consent from the plants whose parts we show
Ask the plant contact, by message, for permission to show a part and to name the plant. Save the reply. Where permission is refused, the part may appear unnamed, or not at all, and the loss is small compared with a broken account.
A person who will answer comments
Name one staff member and a backup who read the page messages during working hours. An unanswered question about a roller looks like a shop that is shut. If nobody is available, we advise keeping the company page to a small number of posts and no open messaging.
Access to the company page and its email
Provide the login and the email linked to each page. A former employee may have made it. We need the owner's own access before we change anything, so recovery of old pages is arranged first.
The names the company uses in public
Confirm the registered name, the brand name and the product names that appear on your catalogue and invoices. A post that uses a different spelling from the website confuses a purchase department checking a vendor. Without a decision, we use the name on the registration.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Look at what the shop already shows

    We go through the photographs on the owner's phone and the foreman's, the old trade-fair pictures and any page that already carries the company name. You tell us which jobs were fitted well and which customers are comfortable being shown. The pile of existing pictures decides what can be posted straight away and what needs a fresh shoot.

  2. 2

    Choose where plant staff and dealers actually look

    We talk through which platforms your buyers use: a company page for purchase heads, a video channel for how a part is made, and a messaging group for dealers. You decide how many your office can keep alive. The platform choice note records the reasons, and platforms you cannot staff are left out.

  3. 3

    Photograph the pour, the demould and the finish

    A shop-floor visit gives us pictures of the mould, the pour, the part coming out and the trimming, with the foreman explaining each. Hands, parts and tools are shown, not faces, unless a worker agrees. You mark any customer part that must not appear. This builds a bank of post ideas from your own work.

  4. 4

    Get the customer's word before a part appears

    For every customer part we send a short consent message to the plant contact, asking whether the part, the photograph and the plant name may be used. The reply is saved with the picture. A part whose owner has not answered is held back, because a plant that finds its part online unannounced stops dealing with you.

  5. 5

    Set up the profile and the reply routine

    We open or tidy the company page with the correct name, address, products and contact. Then we agree who answers a comment or a message, in what words, and when a question about price or duty goes to the sales head. A reply sheet is printed for the person who will do it.

  6. 6

    Link posts to enquiries and read them

    Each post carries a way to ask: a call number, a form or a message link. The sales head notes in the register which enquiries came from a post. Against the count we recorded before the work began, you see which kinds of post led to a worn-part request and which only collected approval.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is social media worth it for a B2B caster?
It gives dealers and buyers a place to check your work after they hear your name. It will not replace visits and phone calls, so it is set up to support them.
Who should post for the shop?
Someone near the work, such as a supervisor or sales engineer, with GullySales preparing the ideas and wording. The owner approves anything showing a customer or a customer's plant.
Should we post the customer's name with the trial?
Only with written agreement from the plant. Some mines and mills bar any mention of their site. Without agreement, describe the industry and the duty and leave the name out. A post that names a plant without permission can cost you that customer.
Is a Facebook page of use to a caster?
Less than LinkedIn for plant staff and purchase heads, but a page can serve dealers and local workshops who buy small parts. Keep it simple, post the same shop-floor photographs, and answer messages on it, since small buyers use it as a phone directory.
Should the owner appear in the videos?
If the owner is comfortable, yes, because a buyer trusts a face that explains a casting. Keep it short and on the shop floor, with the owner talking about a part and the duty, not about the company's size. If the owner prefers not to appear, the foreman can speak, or hands and parts alone can carry the clip. We write talking points from the foreman's own explanation so the video is accurate.
How do we deal with a competitor who copies our post?
First decide whether it matters. A photograph of a standard roller will look like another caster's. If your own photograph or text has been copied, write to the page owner politely and keep a screenshot, and report it to the platform if there is no reply. We help with the message. Do not argue in the comments, because plants reading them see only the argument.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.