Powder coating companies · Website
A coating shop's website answers a buyer's questions about size, shade and finish without a call.
A website for a powder coater is the page a fabricator or OEM buyer reads to decide whether to send parts. GullySales designs it around what the buyer checks: part limits, finishes, shades, quality checks and how to reach the shop.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Last updated 14 Nov 2026.
For powder coating companies
Where it usually goes wrong, and what we would do.
“The site shows an oven and little else”
A single photograph and a phone number tell a buyer nothing about size limits, pretreatment or shade matching. The buyer calls another shop whose site answers these questions.
“The contact path is too long”
A long form scares off a fabricator who wants to send a photo and a quantity. A WhatsApp button and a short enquiry form that asks for part size, shade and quantity suit how this trade buys.
“Proof is missing where it matters”
An OEM buyer looks for the quality sheet, the sample panel offer and photographs of the line. If these are buried or absent, the shop looks like a roadside coater, however well it works.
What we do
What we deliver for powder coating companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
Site structure
Home, finish pages, part pages, quality page, shade guide and contact, laid out from your jobs.
Result: A structure the owner has approved before building.
Capacity and quality pages
Pages stating part limits, pretreatment and checks your team runs, backed by records.
Result: Pages with nothing the shop cannot document.
Enquiry form and WhatsApp link
A short form and a direct chat link capturing size, shade and quantity.
Result: A form that sends complete enquiries to the front desk.
Photo gallery
Before-and-after photographs of real parts, with finish and shade named.
Result: A gallery built from the shop's own work.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches buyers type
A coating site answers the questions a buyer asks first.
- What parts do you coat
- A parts page with photographs of enclosures, racks, gates and extrusions, each with the size range the shop takes.
- How big can the part be
- A capacity page stating oven dimensions and hanging limits, so the buyer decides before calling.
- Which shades do you stock
- A shade page listing codes and finishes, with a line on how a new shade is matched.
- How do I send my parts
- A simple page on cleaning, packing and drawings, ending in an enquiry form and a WhatsApp button.
- Where is the shop
- A contact block with the plant gate, the map link and receiving hours, because trucks need the right lane.
Who it is for
This is written for these powder coating companies.
- Powder coating job shops for fabricators and small manufacturers
- Powder coating for electrical enclosures, panels and switchgear
- Steel furniture, rack and shelving finishing shops
- Auto and two-wheeler ancillary suppliers needing coating
- Coaters for fitness equipment, playground and street furniture
- Aluminium extrusion and architectural powder coaters
- In-house coating units that take outside jobs
- Gate, grill and railing coaters for builders and homes
Before you decide
When this may not be the right fit.
- You have no recent photographs of finished parts, and a site with only an old oven picture would not persuade anyone.
- The owner does not wish to state oven size or finishes, which is what most buyers look for first.
- You expect a price calculator, which cannot work without part, shade and pretreatment details.
Before you decide
Agree the work. Know how to judge it.
Websites for powder coating shops: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from powder coating companies. Anything missing is noted in the written scope, with who will supply it.
- Licence and registration papers
- Bring the papers that show the shop's name, address and registration, for the footer and the contact page. The site must match them. If the shop trades under a different name, tell us which one a buyer knows. Missing papers delay the pages that mention them, and nothing is invented. Also bring any trade association or customer approval letter you hold, and say which you are allowed to display, since we do not print one without your confirmation.
- Current photographs of the oven and racks
- Gather recent photographs of the oven, the booth, the hanging line and coated parts, taken in daylight. Dim or old pictures weaken a good page. If you have few, we plan a photo visit first, and pages that depend on pictures wait until it is done. Include a few images of the pretreatment area and the packing table, since a quality head looks at those before anything else.
- The domain name and its login
- Decide the web address and who owns it. A domain bought by a relative or a former vendor can block the launch. Tell us who will renew it, so that it does not lapse and take the site with it. We need the login or a transfer.
- Delivery area and order cut-off times
- Say which areas you serve, which days vans collect and deliver, and the time after which a job moves to the next day. The site prints these lines, and without them every buyer must phone to ask. Please state only what the shop can keep.
- A person who updates the site afterwards
- Name the person who changes shades, hours and photographs when they change. A site that shows an old shade list sends buyers to ask for powders you no longer stock. We teach this person to edit; without one, the site ages.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Gather the facts a fabricator wants first
We ask for the details a buyer checks before sending parts: the largest part the oven takes, the metals, the pretreatment steps, the finishes, the shades and the loading hours. You supply them from the shop floor and mark what must be checked with your own adviser before printing. What exists is a fact sheet that every page will draw on. We also ask which questions the person at the phone answers repeatedly, and put those answers where a buyer sees them without scrolling.
- 2
Decide the pages and what each answers
We plan a small set of pages: the shop and its capacity, the finishes and shades, the parts you coat, the quality checks and how to send a job. Each page answers one buyer question. You approve the list and cross out anything the shop does not need. A small shop does not need a long list of pages.
- 3
Place the photographs where a buyer looks
We arrange the photographs from the oven, the racks and the finished parts beside the lines they prove. A rack of coated panels sits beside the capacity text, and a close view of an edge sits beside the quality text. You choose pictures that match what the shop produces now, and remove any that show another customer's product. Every photograph gets a short caption that names the part, the shade and the finish in the shop's own words, and the file is compressed so that the page opens on a phone with a weak signal.
- 4
Write the page that shows capacity and quality
We write the capacity page with the supervisor, covering size, weight, metals and what the shop will not coat, and the quality page with the quality person, covering the checks done and recorded. You read both to see that nothing overstates. Where a record cannot be shown, the page describes the check in plain words.
- 5
Build the enquiry form and the chat button
We build a short form that asks for the part, the size, the shade, the quantity and the date, and a button that opens the shop chat on a phone. You test them with your own phone. The contact path should be short, since the buyer is under pressure, and every submitted form lands with the person at the phone. We write down where each form submission arrives and who sees it, then send a test from a phone with the shop's number to confirm that the message reaches the right person and not an unused inbox.
- 6
Launch, then read calls against the starting count
We publish the site, test every link and form on a phone and a computer, and hand you the logins. We then compare the calls, forms and chats with the figures noted before the new site, by source. You see how many enquiries carry a real part. We decide which page to change first. Parts of the site that no buyer reached, such as a long history page, are shortened or removed once the figures show they went unread.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
What should a coating shop's website say first?
Do we need an online shop or price list?
Should the site list rates?
How many pages does a small shop need?
Does the site need a page for each shade?
Should the site list our rates?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for powder coating companies
Related work to consider.
Closest to this: search and visibility
Also for powder coating companies
Or start from the overview: sales and marketing for powder coating companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.