Rotational moulding companies · Website
Build a site where a buyer finds the tank, the dealer and the enquiry sheet in one visit.
A website for a rotational moulder is the place a dealer checks the range, a farmer finds a tank and an engineer sends a drawing. GullySales plans the pages, the product tables and the enquiry forms, and builds a site your team can update.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Also for rotational moulding companies
- SEO for rotational moulding companies
- Local SEO for rotational moulding companies
- Lead generation for rotational moulding companies
- Social media marketing for rotational moulding companies
- Content marketing for rotational moulding companies
- Buyer persona for rotational moulding companies
- CRM for rotational moulding companies
- Follow-up systems for rotational moulding companies
Sales and marketing for rotational moulding companies, the overview.
Last updated 14 Nov 2026.
For rotational moulding companies
Where it usually goes wrong, and what we would do.
“Capacities are buried in a catalogue”
A buyer wants a litre size, a colour and a use in a few seconds. A downloadable catalogue hides this, and a phone user may not open it at all.
“Dealers and engineers land on the same page”
A dealer wants terms and a pack. An engineer wants parts made and an enquiry sheet. A home page that sends each to the right place saves both a wasted visit.
“The cut section is the proof”
Photographs of a cut tank showing layers do more than a claim of quality. If the site only has a clean studio shot, the buyer cannot see the wall.
“Price on the site upsets the counter”
A figure on the page conflicts with the price the dealer quotes. List capacities and features, and keep rate lists for dealers private.
What we do
What we deliver for rotational moulding companies.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A page for each tank type and use
Household, farm, dairy, chemical, septic and bins, each with capacity table, fittings and limits.
Result: A buyer finds the tank for their use.
A dealer page
Terms in plain words, warranty summary, how to apply and a form for dealers.
Result: Dealer enquiries arrive with the details needed.
A custom parts page and enquiry form
Examples of parts made, the process in plain words and the enquiry sheet as a form with file upload.
Result: Drawings arrive with size, volume and use.
A cut-section explainer
Photographs and text on layers, wall thickness and stabilisers.
Result: A buyer can see what sits inside the wall.
A phone-ready build
Pages that load on a mobile connection, with a call and chat button on every page.
Result: A buyer on a phone can ask without hunting for a number.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
Give each tank type, dealer and custom enquiry a clear page.
- 500 litre to 10000 litre water tanks
- A capacity page with the size table, the layers and the fittings, and a link to the nearest dealer.
- how a rotomoulded tank wall is made
- A cut-section explainer with photographs, so a dealer or buyer sees what a layered wall is.
- become a tank dealer
- A dealer page with territory rules, the support you give and a form asking for the shop's details.
- custom rotational moulded parts enquiry
- A custom parts page with a form asking dimensions, quantity, use and drawing upload.
- rotational moulding company contact and plant location
- A contact page with the plant address, gate hours and the numbers for sales and dealers.
Who it is for
This is written for these rotational moulding companies.
- Water storage tank manufacturers
- Chemical and process tank makers
- Septic and underground tank makers
- Dustbin and waste container makers
- Material handling bins and pallets
- Playground and outdoor furniture makers
- Marine floats, buoys and boat makers
- Custom OEM housings and enclosures
Before you decide
When this may not be the right fit.
- Your capacities and specifications are not settled, and pages would need rewriting after each change.
- Nobody can answer the custom parts form, so a better page would gather enquiries that go unread.
- You plan to show prices that differ by dealer, and a public figure would cause disputes.
Before you decide
Agree the work. Know how to judge it.
Website for rotational moulding companies: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from rotational moulding companies. Anything missing is noted in the written scope, with who will supply it.
- The domain and hosting login
- Without these we cannot publish. If a previous vendor holds them, recovering them is the first task and the site waits. Even a login to the domain registrar is a good start, because it lets us trace the rest. Also tell us where the domain was bought, and which email address received the receipt.
- A current price list and capacity chart
- The product tables come from this document. An old chart puts discontinued tanks on the site. The tables show each capacity with its dimensions and layers, so the figures must be ones your production team trusts. List discontinued sizes separately, so they are not mistaken for current ones.
- Photographs of tanks and a cut wall
- Clear images of finished tanks in colour and a cut section. Weak images leave the product pages thin and the explainer empty. The cut wall should be sawn clean, photographed against a plain background with a scale beside it. Please send originals, not messages that have squeezed them, since compressed images look poor on a large screen.
- Your decision on a dealer list
- Decide whether the site shows dealers. Each must agree in writing. Without a decision, the site carries no locator. Where a dealer is not ready to be named, the page lists the town only and a contact route through the factory. If dealers have different margins, we leave rates off the dealer page and invite a call.
- One person to approve the final text
- A single name signs off every page. If a crowd of people comment, the work stalls. That person also decides when the site goes live, so launch does not wait on several opinions. That person also answers questions from us within the working day, so the build keeps moving.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Open the site as farmer and engineer
We view your existing site on a mid-range phone, first as a farmer looking for a tank and then as an engineer looking for a moulder. We list what loads, what is missing and where each visitor gets lost. You decide, after we show the reasons, whether to repair or rebuild. We note slow images and large files, since a farmer on mobile data gives up on a slow page. Mark each pain point with a screenshot, so you see what the visitor sees and not our description of it.
- 2
Gather capacities, layers and product photographs
From your price list and photographs we list every tank type, capacity, colour and layer option, and the custom parts you have made. You confirm which customers allow their parts to be shown. Anything without consent appears without names. Where a part belongs to an OEM, we ask whether it may be shown, and in what form. If a capacity is listed on the old site but the mould is retired, we remove it and tell you which pages carried it.
- 3
Draw the pages for each visitor
On paper we lay out a page for each tank type and use, a dealer page, a custom parts page and the cut-section explainer. You approve this structure before any design starts, because it decides what a visitor finds in three taps. We keep the structure small so each page has one clear job and a short route to the enquiry form. We also agree which words stay in everyday form, for example sump or overhead, so the headings match what buyers type.
- 4
Write the cut-section explainer with your production head
Your production head shows us a cut wall and explains the layers, and we write the explainer with a labelled photograph. The page claims only what your own consultant clears, and points to current rules for drinking water and chemical use. The cut-section page also explains the vocabulary of layers and foam in everyday words, with a drawing for the engineer. Your consultant sees the drinking water and chemical wording before it is placed, and any line they refuse is removed whole.
- 5
Test the enquiry forms and drawing upload
On a test copy we send a made-up dealer enquiry and a drawing through each form and check where they land. Your staff correct any question that would put off an engineer, and we check the form on a slow connection. We also check what the confirmation message says and who in the factory receives each enquiry.
- 6
Go live, hand over logins and read enquiries
After launch we check speed, links and tracking, and give you every login. We read enquiries from the site against the figures recorded before the work began, and you decide which pages change first. Pages that bring visitors but no enquiries are rewritten first, before new pages are added. Pages are checked in the browsers your visitors use, on a small screen and on a slow connection.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Should the site show a dealer list?
Can we update the site ourselves?
Should every tank size have its own page?
Will a visitor upload a drawing?
Should one page carry several capacities of a tank type?
Will visitors really upload a drawing?
How much does it cost?
How long is the contract?
How soon will we see results?
Who will actually do the work?
More for rotational moulding companies
Related work to consider.
Closest to this: search and visibility
Also for rotational moulding companies
Or start from the overview: sales and marketing for rotational moulding companies.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.