Skip to content
GullySales

Rubber moulding companies · CRM

Track every drawing from first email to tool order in one place.

A CRM for a rubber moulder is a single record of every buyer, drawing, quote, sample and tool order, so nothing depends on one person's memory. GullySales works on setting up the fields, stages and habits that fit moulding work, in a tool your team will use.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For rubber moulding companies

Where it usually goes wrong, and what we would do.

  • “A moulding enquiry has stages a generic CRM does not name”

    A stock pipeline says lead, proposal, won. A moulder's real stages are drawing received, costed, tool quote sent, tool approved, sample sent, first article approved, regular supply. Naming those stages shows exactly where each part is stuck.

  • “The drawing belongs on the record”

    A quote with no drawing attached forces the estimator to hunt through email. Storing the drawing, revision, material and volume against the buyer and the part means the next call starts with the file open.

  • “Customer-owned tools need their own tracking”

    Where the buyer owns a tool kept at your shop, the record needs the tool number, cavities, last repair and who pays. Without that, a repair request becomes a search through old files, and the buyer notices.

  • “Spreadsheet or software”

    A shop with a short list of live quotes can run on a well-kept sheet. A shop with a long list of part families and buyers needs a proper CRM. The lighter option your team opens daily beats the heavier one nobody touches.

What we do

What we deliver for rubber moulding companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Stages built for moulding

    Pipeline stages from drawing received to regular supply, with a clear exit rule for each.

    Result: Every open part sits in a named stage.

  2. Record fields

    Buyer, role, part, drawing revision, material, hardness, yearly volume, tool owner and next step.

    Result: A record tells your team what is needed without opening email.

  3. A tool register

    A list of customer-owned and own tools with cavity count, repair history and storage location.

    Result: Your team can find any tool's history in one place.

  4. Import of existing contacts and quotes

    Past enquiries and buyer details cleaned and loaded from mailboxes, sheets and directory exports.

    Result: The CRM opens with your real buyer list in it.

  5. A team habits sheet

    A short guide on who updates what after each call or email.

    Result: Each person knows their part in keeping the record true.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep these fields so a moulding enquiry shows where the tool and the sample stand.

Drawing revision and date received
Filled by whoever opens the RFQ. It shows which revision was quoted and stops a mould being cut on a superseded drawing.
Moulding method and cavity count
Entered by the tool room head at costing. It lets sales see which customers need a multi-cavity tool and which run a single cavity.
Tool owner and storage location
Filled by whoever receives the tool. It answers where a customer-owned mould sits and who must approve a repair.
Sample lot and inspection result
Entered by quality. It lets sales tell a buyer exactly where the approval stands without walking to the lab.
Tool quote status and next contact
The salesperson who sent the quote keeps this row current. It prevents a tool quote going quiet because everyone assumed someone else was following up.

Who it is for

This is written for these rubber moulding companies.

  • Compression moulders making bushes, mounts and sealing parts for auto suppliers
  • Injection rubber moulders for small precision parts with several cavities
  • Transfer moulders for rubber-to-metal bonded components
  • Silicone and EPDM moulders serving appliance and kitchen-ware makers
  • Moulders making diaphragms, bellows and boots for pumps and valves
  • Railway and metro vendors needing anti-vibration and buffer parts
  • Shops that also run their own tool room for mould making and repair
  • Job-work moulders running customer-owned tools

Before you decide

When this may not be the right fit.

  • Your team will keep their own notes on paper whatever the system says, and nobody has agreed to enter the data
  • You have fewer than a handful of live customers, where a shared sheet already holds everything you need

Before you decide

Agree the work. Know how to judge it.

CRM for rubber moulders: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from rubber moulding companies. Anything missing is noted in the written scope, with who will supply it.

Open quotes with drawings attached
The system needs live data. Provide the list of open quotes with buyer, part and date, and the drawings where you can find them. If they sit only in email, the estimator needs a sitting with us to list them. Include the date each quote was sent and its validity, so expired quotes can be separated from live ones on the first day.
The mould register as it exists
Whether it is a notebook, a sheet or a rack list, we need what you have. It does not need to be neat. Where the register is missing, we walk the mould store with the tool room head and write it down. Photographs of the tool tags on the racks are enough to start the register, and we match them to customers with the tool room head afterwards.
A person who enters the data
Someone must be responsible for entry. Name one and a substitute. If every salesperson enters their own, we write a short rule for the fields so records match. If two people share the entry, we agree one rule for naming parts, so a customer does not appear under two spellings.
Your decision on the tool and who pays
We propose options with their costs and the owner decides. If paid software is not approved, we build in a spreadsheet and plan the move later, with the columns arranged so they transfer cleanly. Whichever option is chosen, the owner also names who holds the administrator login, so the account is not lost with one employee.
Contacts from phones, directories and email
Buyers are stored in several places. Bring exports from each. We clean them with you, and contacts without a clear company are set aside for your decision.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one drawing from inbox to tool order

    We take a recent drawing and follow it through who received it, who checked it, who costed the tool and the part, who sent the quote and who followed up. We draw the path with the estimator. It shows where information is lost between people, which is what the CRM must hold. We also note which handoffs depend on one person remembering to forward an email, because those fail when that person is on leave or at a customer visit.

  2. 2

    Name the stages a moulding enquiry passes

    We write stages in your own terms: drawing received, technical check, tool costing, part quote, tool order, first sample, first article approval, running order. The tool room head and estimator confirm them. Each stage gets a rule for when an enquiry may move on.

  3. 3

    Design the record around the drawing

    We list the fields each enquiry needs: drawing and revision, compound, hardness, cavity count, quantity, quote validity, tool owner. Fields nobody will fill are dropped. The estimator agrees the final list, so the record is short enough to be completed at the desk. Fields that nobody can name a use for are dropped before setup, and the compound and hardness fields offer a pick list so spellings stay the same.

  4. 4

    Build the tool register inside the system

    For customer-owned tools and tools you built, we add a register: tool number, customer, location, last used, condition. The tool room head checks the first entries against the actual racks. This lets a quote refer to an existing tool and avoids a second cost. For each tool we also note the cavity count and the press it runs on, so a repeat quote starts from what already exists.

  5. 5

    Load live enquiries and train the team

    We enter ten live enquiries with the estimator, import contacts and open quotes, and mark uncertain ones for decision. The team then uses the system for real work while we are present. We note every skipped field and remove or rename it.

  6. 6

    Read the pipeline against the starting list

    At the end we set the pipeline against the list of open quotes taken at the start. The sales head marks which enquiries now have an owner and a next step. We report what the record shows and make no promise about orders.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid software?
Not necessarily. Some shops start with a shared sheet and move to a CRM when the sheet gets heavy. GullySales sets up whichever your team will keep updated, and names a paid tool only when it fits your shop.
Who enters the data?
The person who handles the call or email enters it, in a few fields. We keep the form short, because a CRM that takes long to fill is left empty and then misleads the owner.
Can the CRM hold our mould register?
A simple tool register can sit beside the customer record: tool number, owner, cavity count, location and last repair. Reason: the same people ask about both. Do not mix it with the quote stages, so each screen stays readable.
What do we do with the drawings already in email?
Save each live drawing to the customer record and leave closed jobs where they are. Reason: moving every old attachment takes time and adds noise. Add an old drawing only when the customer sends a new enquiry that refers to it.
Can the CRM tell us when a tool is idle?
Yes, if the register holds the date each tool was last used and someone updates it when a run finishes. The record then lists tools unused for a period you set, so the owner can ask the customer whether to keep them. The system only reports what is entered, so the tool room head must own the update.
What if the estimator resists using it?
The system is tested on the estimator's own enquiries and the fields are cut to what the estimator really needs. A system that adds work without helping is dropped. The owner should explain why the record matters, and we sit with the estimator during the first live use to remove any field that wastes time.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.