Skip to content
GullySales

Rubber moulding companies · Social media

Show the press, the tool and the part so engineers trust the shop.

Social media for a rubber moulder means a LinkedIn page, a YouTube channel and short posts that show the shop floor to people who source parts. GullySales works on what to post, who should see it, and how a post leads to a drawing request.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For rubber moulding companies

Where it usually goes wrong, and what we would do.

  • “The audience is engineers, not the public”

    Reach matters less than who sees a post. A purchase engineer at a pump maker, a tooling engineer at an auto supplier and a distributor of industrial rubber are the readers worth reaching. A post seen by those people is worth more than one liked by strangers.

  • “Floor footage proves what a brochure claims”

    A short clip of a press opening, a deflashing bench or a tool being fitted shows a buyer that the shop runs real work. Phone footage taken with permission, with no customer part or drawing in view, is enough to build trust.

  • “Customer confidentiality limits what can be shown”

    Buyers treat their parts and drawings as confidential, so posts show generic parts, own-design samples and the process, never a customer's part without written permission. A posting rule agreed in advance spares the shop an awkward call from a purchase team.

  • “LinkedIn carries the buyers”

    LinkedIn is where purchase and design engineers appear by name and employer, so it suits introductions and capability posts. YouTube suits process videos a buyer can watch before a visit. Effort goes where the buyers are, not where the shop happens to have an account.

What we do

What we deliver for rubber moulding companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A LinkedIn company page that speaks to purchase engineers

    Page description, part families, photographs and a link to the capability profile, written for a purchase engineer.

    Result: A buyer who opens the page sees what you mould and how to send a drawing.

  2. A posting plan built on the shop floor

    A list of post ideas drawn from presses, tool room work, inspection and packing, each with a note on what may be shown.

    Result: Your team has a bank of ideas that need no camera crew.

  3. A confidentiality rule for posts

    A one-page rule on what never appears, such as customer parts, drawings and part numbers, with a check before posting.

    Result: Everyone posting knows what is off limits.

  4. Process video outlines

    Short scripts for a compression moulding cycle, a rubber-to-metal bonding step and a first article inspection.

    Result: Each video explains one step in a buyer's terms.

  5. A connection list

    Named purchase and design engineers to connect with, grouped by part family.

    Result: Your posts reach people you chose.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

Plan posts around what a moulding shop can show without naming a customer.

A press opening on a cured bush
A short clip of the mould opening and the part coming out, with the compound named. Check no customer logo or drawing number is visible in frame.
Flash removal and trimming
Photographs of the finishing bench with a caption on how you hold the edge tolerance. Engineers read this as evidence of care after moulding.
A mould being polished in the tool room
A photograph of the cavity work with a note on what a mould repair involves. It shows buyers the tool is looked after, not just used.
Shore A testing at the lab bench
A photograph of the durometer on a sample with a line about what you check before dispatch. Post only readings you are willing to stand behind.
A failed sample and what was changed
A short note on a sample that was rejected and the change made to the compound or the tool, with no customer named. It teaches and it builds trust.

Who it is for

This is written for these rubber moulding companies.

  • Compression moulders making bushes, mounts and sealing parts for auto suppliers
  • Injection rubber moulders for small precision parts with several cavities
  • Transfer moulders for rubber-to-metal bonded components
  • Silicone and EPDM moulders serving appliance and kitchen-ware makers
  • Moulders making diaphragms, bellows and boots for pumps and valves
  • Railway and metro vendors needing anti-vibration and buffer parts
  • Shops that also run their own tool room for mould making and repair
  • Job-work moulders running customer-owned tools

Before you decide

When this may not be the right fit.

  • A customer contract bars photographs of its parts, and you have no non-confidential work to show instead
  • The shop floor is closed to a camera and no one will be allowed to photograph a press or a mould

Before you decide

Agree the work. Know how to judge it.

Social media for rubber moulders: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from rubber moulding companies. Anything missing is noted in the written scope, with who will supply it.

Administrator rights on the LinkedIn page
The page must belong to the company, with the owner or a senior person as administrator. If a former employee or agent holds it, access is recovered first. Without it, we cannot schedule or correct posts.
A list of customers who bar publicity
The sales head knows which buyers have conditions on being mentioned. Give us the list, however short. Without it, we avoid every customer-related post, which leaves less to show and makes the feed read like a brochure.
Raw clips from the floor
Phone video of presses, trimming and inspection is enough, and we edit it. Tell us who takes the clips and when the presses are running. If nothing can be filmed, the plan starts with photographs and diagrams and the weakness is noted.
A staff member who agrees to appear
A face behind the work builds trust with an engineer, but only with consent. Name one person from the floor or the tool room who agrees. If none does, posts focus on parts and processes.
A reviewer for each post
Every post is checked by a person who can say whether it is accurate and safe to show, such as the production supervisor. Name the reviewer and a substitute, because a post that waits for a person who is away stays in draft and the plan slips.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Find which engineers already follow you

    We open the company page and the profiles of the owner, estimator and tool room head, and look at who follows or is connected: purchase engineers, quality staff, vendor development people. You tell us who among them you have dealt with. This list of real connections is the audience we write for, not an imagined crowd.

  2. 2

    Walk the shop floor with a phone

    With the production supervisor we go past the presses, the mould store and the trimming bench, and mark what shows craft to an engineer: a mould being loaded, a first article being measured, flash being checked. We take sample clips. The owner marks anything that must stay private.

  3. 3

    Write the confidentiality rule for posts

    Customer parts, drawings and tool numbers are bound by an agreement. We write a one-page rule on what may be shown, how a part is covered and who signs off a post. Everyone who takes pictures on the floor gets a copy before any clip is recorded.

  4. 4

    Turn the footage into a posting plan

    We cut the clips and photographs into posts, each tied to a purpose: a process, a quality check, a new press, a tool repair. You pick the ones you want to publish. The plan lists who approves each and does not fix a pace that the shop cannot keep.

  5. 5

    Outline the process videos with the tool room

    With the tool room head we outline short videos on how a rubber part goes from drawing to tool to first sample. The head chooses what to explain and what to keep to themselves. We write the narration in plain terms and check each fact against the real process.

  6. 6

    Read profile visits and messages against drawings

    At the end we read the page views, connection requests and messages, and match them with the drawing enquiries received. You note which engineers mentioned a post. We report what was seen, without claiming a post caused an enquiry, and the owner decides which kinds of post continue.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is social media worth the time for a B2B moulder?
It is worth it when the audience is the engineers who source parts. LinkedIn lets a shop show its work to named buyers. It does not replace quoting or vendor registration, but it gives a cold introduction something to point to.
Can we post photos of parts we make for customers?
Treat every customer part and drawing as confidential unless the buyer agrees in writing. Posts can show your own samples, the machines and the process without naming a customer.
Which platform should a moulding shop use first?
LinkedIn. The people who send drawings are engineers and purchase staff, and most have a work profile there. Reason: a visit from them turns into a connection you can message. Keep the company page factual and post from the shop floor.
Who should be in the photographs?
Show hands, presses and parts, and ask any operator's consent before showing a face. Reason: a moulding shop runs on a few skilled people, and a public post can attract a rival's offer. Keep people out of frame when in doubt.
Can the owner's own profile do the posting?
It can, and for a small moulder it can reach engineers better than a company page, because buyers deal with a person. We write posts for the owner's profile in the owner's voice and keep the company page for facts such as new equipment. The owner approves each post and decides whether the voice sounds right.
How do we handle a comment from a competitor?
Ignore a comment that adds nothing, and answer a technical question politely and briefly. Never argue in public or share a price. If a comment raises a real issue with a part, move it to a private message and to the quality head. The sales head decides which comments deserve an answer.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.