Skip to content
GullySales

Thermoforming companies · Website

Build a site where a packer sees the tray, the sheet and the way to send a photograph.

A website for a thermoforming company is a catalogue of formed parts with a plain route to start an enquiry, not a brochure about the process. GullySales builds the pages, the material detail and the photograph-first form around what your machines produce.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of plastic injection moulding units at work in India

What website means

A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.

Last updated 14 Nov 2026.

For thermoforming companies

Where it usually goes wrong, and what we would do.

  • “The homepage should show parts, not a factory front”

    A buyer arrives wanting a tray or a panel. A hero image of the building says little. A row of formed parts, each linked to its page, tells the buyer within a glance whether they are in the right place.

  • “Each page needs the sheet, gauge and size”

    An engineer or packer reads specifications to decide whether to ask. A page without material, thickness and typical size forces a phone call some buyers will never make.

  • “A form that demands a drawing loses the small buyer”

    A food packer cannot supply one. A form that takes a product photo, a sample description or a sketch, with quantity and use, lets that buyer start. Add a WhatsApp button beside it.

  • “Phone visitors need to see parts at once”

    Buyers open the site on a phone from a marketplace listing. Heavy images, tiny type and hidden contact details send them back. The pages must load lightly and show a call and message button.

What we do

What we deliver for thermoforming companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A parts catalogue structure

    Pages grouped by trays, blisters, clamshells, covers and panels, each with photographs and sheet detail.

    Result: A buyer can browse to a pack close to their need.

  2. A tooling and sample page

    A plain page on how a tool is made, what a first sample involves and what the buyer sends.

    Result: A first-time buyer understands the path before writing.

  3. The photograph-first enquiry form

    A form and WhatsApp button accepting a photo, a sample or a sketch with quantity and use.

    Result: An enquiry can begin without a drawing.

  4. An unnamed-work portfolio

    Pages showing the pack, the product type and the problem solved, with names only where agreed.

    Result: A prospect can judge quality without client names.

  5. Mobile and speed work

    Compressed images, readable type and visible contact buttons on small screens.

    Result: The site is usable on a phone with a weak signal.

How the result is measured

  • Page load time
  • Bounce rate
  • Enquiries from the website

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The searches that reach a forming shop's site, and the page each lands on.

company name
The home page, led by photographs of formed parts with the send-a-photograph route beside them. A buyer given your name by a friend checks it here.
tray, blister or clamshell by name
A parts page for each pack with the sheet, the sizes formed and a photograph. Keep one page per pack so the search finds the right one.
heavy gauge panel maker
A page for equipment makers stating panel sizes, sheet thickness and finish, with a sample of a trimmed cover.
how to get a tray made
A short tooling and sample page: what to send, what happens next and what the first sample is. It answers a first-time buyer who fears the process.
send a photograph for a quote
The enquiry page with a form that takes a photograph, a quantity and a date. It must open on a phone without asking for a drawing.

Who it is for

This is written for these thermoforming companies.

  • Food tray and sweet box makers
  • Blister and clamshell pack makers
  • Disposable cups, lids and containers
  • Electronics and tool packaging tray makers
  • Pharma and medical device tray makers
  • Heavy-gauge panel and cover makers
  • Vehicle interior and bodywork panel makers
  • Signage, display and point-of-sale formers

Before you decide

When this may not be the right fit.

  • You have no photographs of formed parts, and a site of stock images would tell the buyer nothing about your work.
  • The enquiry inbox is read only when the owner is free, and a better site would send enquiries into the same delay.

Before you decide

Agree the work. Know how to judge it.

Website for thermoforming companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.

Make the scope clear

Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.

Check the work in use

Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.

Know when to change course

If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from thermoforming companies. Anything missing is noted in the written scope, with who will supply it.

Sheet and gauge facts for every part family
Buyers decide whether to write on the strength of the material, thickness and size on the page. A list from the production head is enough. If we lack it, pages carry only the part name and a photograph, and engineers who search by gauge pass the site by.
A clear set of original part photographs
Photographs carry the page, so we need real parts on a plain surface, not images borrowed from a supplier. Phone photographs are acceptable. Parts made for a named customer remain off the site unless that customer agrees, and without enough photographs, the catalogue is short.
Logins for the domain and hosting
Moving or rebuilding the site needs the domain and hosting accounts, and these are sometimes held by a former agency or relative. We need your authority to ask for them. Without them, the new site cannot be put at the old address, and a printed address on your cards would lead nowhere.
Your decision on prices and minimum quantities
The site can state a starting figure, state a minimum order, or say only that a quote is given on request. This is your decision alone. Until it is made, the pages ask the buyer to write for a quote, which suits the cautious but may deter the buyer who wants a rough idea.
Who receives the enquiry form
A named person on the sales desk must see each form at once and write down its source. Tell us who and what number or address to use. An unmonitored inbox makes the new site look dead to a packer who wrote and heard nothing.

How it works

How the website work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Photograph the parts for the front page

    The work starts on your sample shelf, where we choose the formed parts that will open the site and photograph them against a plain surface. You choose which parts can be shown and which belong to named customers. The homepage is built to show parts at once, with the factory front left for later.

  2. 2

    Gather machine and sheet facts from the floor

    Each page needs the sheet, gauge, size and finish stated plainly, so we sit with the production head and write down what each family of parts is made from and the limits of your press. You correct every figure. Nothing about size or thickness goes on a page unless the floor has confirmed it.

  3. 3

    Take access to the domain and current site

    We need the domain registrar, the hosting and any existing site's back end, and we need to know who owns each. You request them from whoever set them up. We record the present enquiry count from the form and the phone before changing anything, so the new site has a fair comparison.

  4. 4

    Agree the page map and the enquiry form

    We lay out the catalogue of parts, the tooling and sample page and the form. The form takes a photograph, a sketch or a drawing, and asks for the quantity and material, so a small buyer is not turned away. You approve each field, and decide who receives the form and in what order they reply.

  5. 5

    Fill a test site and read it

    A private version of the site is built with real photographs and wording. The sales desk reads it on a phone as a packer would, and the production head checks every technical line. Your own adviser reviews any wording on food, medical or electronics packs. Corrections are made before anything goes public.

  6. 6

    Switch on and compare the enquiries

    When you approve, the site goes live, the old addresses are redirected and the form is tested from outside. Over the weeks that follow we set the enquiries received against the count taken before, and the sales desk judges their quality. Pages that attract the wrong visitor are changed, and no result is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need a full redesign?
Not always. If your current site loads, shows parts and takes enquiries, we may improve pages and the form rather than rebuild. We look at the site and your enquiry record first.
Should prices be on the site?
Leave them off for formed parts, since cost depends on size, sheet, quantity and tooling. State what drives the price and invite a photo or sketch for a quote.
What photographs do we need?
Clear shots of your own formed parts on a plain background, plus one with the product inside. The team can take them on a phone, and we supply a short guide.
Should the site list the machine sizes we own?
List the largest sheet and the depth you can form, not the machine's make. A buyer wants to know whether the part fits. State the limit plainly and add a line that larger work is passed on or declined.
Should the site state the biggest sheet we can form?
Yes, in plain terms: the largest sheet size and depth of draw you can form, and the gauges you run. An engineer with a large cover wants to know at once whether you can make it, and a packer wants to know the tray will fit. Machine brand names matter less than the limits. If you plan to buy a larger press, do not list it until it is installed, because a page that promises capacity you lack will bring enquiries you cannot take.
Do we need to replace the whole website?
Not always. If the present site loads on a phone, belongs to you and can carry a parts catalogue and a photograph-first form, we can rebuild its pages without starting again. If it is slow, locked to a former agency or cannot be edited, a rebuild is cleaner. We look at the site and your access first, then tell you which course costs less trouble. You decide, with no obligation to take the larger option.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.