Skip to content
GullySales

Waterjet cutting companies · Lead generation

Find the buyers whose material would be ruined by heat before they find a laser shop.

Lead generation for a waterjet shop is the work of reaching fabricators, stone dealers, gasket makers and designers at the moment a drawing meets a material that laser or plasma would burn, crack or warp. GullySales works on which buyers to reach, where they look and how each enquiry is logged from the first file.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For waterjet cutting companies

Where it usually goes wrong, and what we would do.

  • “The buyer starts from the material, not the machine”

    A stone dealer looks for marble inlay, a gasket maker for rubber profiles, a fabricator for thick stainless. Nobody searches for abrasive cutting technology. Leads come from naming the material and the problem heat causes, so each buyer sees their own job described.

  • “Overflow from laser and plasma shops is a lead source”

    Laser and plasma shops turn away reflective, thick or heat-sensitive jobs every day. A short, friendly note to those shops, offering to take the work they cannot, gives them a place to send it and gives you jobs that arrive already qualified.

  • “Designers and architects specify, others buy”

    An interior designer draws the metal screen or stone floor panel, and a contractor orders the cut. Reaching the designer with finished examples puts your shop into the drawing, which is where the supplier is chosen before any quote is asked for.

  • “A lead without a file is only a name”

    A call that says we need some cutting done stalls until a DXF arrives. Leads worth chasing carry material, thickness, quantity and a drawing. The intake has to ask for those four things at the first touch, or the shop spends its day on chasing.

What we do

What we deliver for waterjet cutting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A map of buyers by material

    A list of the fabricator, stone, gasket, glass and aerospace buyers near you, grouped by the material each would send.

    Result: You know which material brings the repeat accounts worth keeping.

  2. An outreach note per buyer type

    A short message for each group, written in that group's words, with a link to the matching material page and a photograph of a real cut.

    Result: Each buyer type gets a message that names their own job.

  3. A referral route from laser and plasma shops

    A simple way for shops that turn work away to pass it on, with the details you need from them.

    Result: Turned-away jobs have a named place to go.

  4. A single intake for every lead source

    One form, one email address and one WhatsApp number feeding the same lead sheet, so a search click, a phone call and a marketplace enquiry are logged alike.

    Result: Every enquiry sits in one place with its source written beside it.

  5. A search advertisement for each high-margin material

    Small advertisements on the materials you want to cut more of, sending the click to a page that asks for the file.

    Result: You can see which materials bring enquiries and which bring only clicks.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

A waterjet lead is ready to quote once these five details are in.

Material and grade
Stainless, aluminium, granite, glass, rubber or composite. It decides the abrasive used, the cutting speed and which sample cut to show.
Thickness and sheet size
Both must fit the bed. A part larger than the bed needs another plan, and it is better found before the quote than after.
Drawing file in DXF or DWG
Received by the estimator. A lead without a file stays a name until one arrives.
Edge finish and the next process
Welded, painted, polished or fitted. Taper and finish decide whether the cut part is acceptable.
Quantity and repeat
One piece, a batch or a standing order. It shows whether the buyer is a single project or an account.

Who it is for

This is written for these waterjet cutting companies.

  • Stainless steel and aluminium fabricators needing heat-free profiles
  • Granite, marble and tile inlay makers and stone dealers
  • Gasket, seal and rubber part manufacturers
  • Glass and acrylic signage and decor studios
  • Aerospace and defence parts suppliers cutting titanium and composites
  • Tool rooms and machine builders profiling hardened plate
  • Interior designers and architects ordering metal and stone panels
  • Laser and plasma shops passing on thick or reflective jobs

Before you decide

When this may not be the right fit.

  • Nobody in the shop can read a drawing and price it, so every lead would wait for the owner.
  • Your bed is small and cannot cut the large sheets most buyers ask for, so you would be quoting jobs you must refuse.

Before you decide

Agree the work. Know how to judge it.

Lead generation for waterjet cutting companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from waterjet cutting companies. Anything missing is noted in the written scope, with who will supply it.

Two years of quotes with files
We need the quotes and their DXF or PDF drawings together, in any state, even photographed pages. They show which materials and buyer types really send work. Without them the buyer map rests on your memory alone, and we would plan from the loudest recent job instead.
The bed size and thickest cut
Write down the table dimensions and the greatest thickness you cut cleanly for each material. Outreach notes and advertisements state these limits, so a wrong figure invites enquiries you cannot accept. If you are unsure, cut a test piece first and tell us what you saw.
A list of materials you decline
Name the materials, thicknesses or part sizes you turn away or pass to others. Our intake form and replies use this list to filter early. If it is missing, every enquiry reaches your estimator, and the time lost on unsuitable files hides the good leads.
One person who answers new drawings
Choose the person who opens each new file and replies to the buyer. That person must be named before outreach begins, because a lead waits on a reply, not on our work. If nobody owns it, the first good file sits in a shared inbox.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Sort the quote folder by material

    We start with the folder of past quotes and the drawings attached to them. Grouping them by material and buyer type shows which enquiries turned into invoices and which only produced a question. You then name the two or three materials that pay the machine best, because the buyers we reach first are chosen from that choice.

  2. 2

    Map who sends drawings for each material

    From that sorted folder we write down the fabricator, stone dealer, gasket maker or designer behind each material, and where each one looks when a laser or plasma cut would fail. You correct the map from what you know of the local industrial estates, and the corrected map becomes the list we work from.

  3. 3

    Agree the referral route with laser shops

    A laser or plasma shop that meets a thick or reflective job has nowhere to send it. We draft a short note for those shops with the bed size and the thickest cut you accept. You decide which shops are partners rather than rivals, and you speak to the first owner yourself.

  4. 4

    Send a test drawing through the intake

    We put one made-up enquiry through each source, whether it is a call, a form or a message, and watch where the file lands. You or your estimator reply the way you would to a real buyer. Whatever gets lost or sits unanswered is fixed before any outreach note goes out.

  5. 5

    Read the log against the first quote count

    Once the notes and advertisements are running, we compare the intake log with the count of quotes and files you recorded before we began. You see which source brought drawings you could actually cut and which brought only names, and you decide which materials and buyer types get further attention.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we chase large fabricators or small workshops first?
Start with the buyers whose material suits waterjet and whose order repeats. A small workshop with a recurring gasket job can be worth more than a large firm that sends one project. Your own job book shows which accounts return.
Do marketplace enquiries count as leads?
They do, once they are logged with a source and a file request. Marketplace enquiries arrive vague, so the first reply should ask for material, thickness and drawing, and the lead sheet should record whether the buyer answered.
What do we do with a lead whose part is bigger than the bed?
Say so, and offer to cut in sections only if a joint suits the use. A large part cut in pieces and joined may miss the buyer's tolerance, so ask what the part does. Record the size to see whether buyers keep asking for a larger bed.
Should we turn away jobs outside our materials?
Yes, and name the materials you do cut. A refusal with a reason builds trust with a fabricator who may send the right job next. Take fragile or reflective material only if the shop has cut it before, since breakage is argued afterwards.
Can a stone dealer and a metal fabricator share one outreach note?
No, they should receive separate notes, because they worry about different things. The stone dealer asks about breakage, pattern matching and who bears a cracked slab, while the fabricator asks about edge finish and what happens when the part is welded afterwards. We write one short note per buyer type and keep the same intake behind both, so the replies land in one log you can read.
What do we do if a laser shop sends us an overflow job that fails?
Treat it as a record, not a quarrel. Note the material, the reason it failed and what the sending shop knew beforehand, then tell them plainly what the bed or the material could not do. We add the case to the referral note so later jobs arrive with the right file and thickness. A partner who gets honest feedback sends better work.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.