Skip to content
GullySales

Waterjet cutting companies · Social media

Post the cut itself, because a jet through stone does half the selling.

Social media marketing for a waterjet shop is the use of short videos and photographs of cuts to reach designers, fabricators and stone dealers who never think of waterjet until they see what it does. GullySales works on what to film, where it is posted and how a viewer becomes a buyer with a file.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of cnc machining companies at work in India

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For waterjet cutting companies

Where it usually goes wrong, and what we would do.

  • “The cut is a spectacle”

    A jet slicing through granite or titanium holds a viewer in a way few industrial processes can. A short clip with the material and the part named does more than a company announcement, and it shows the capability to people who did not know it existed.

  • “Designers follow images, fabricators follow people”

    Designers and architects spend time on Instagram and Pinterest, looking for panels and patterns. Fabricators spend it on LinkedIn and on WhatsApp groups. One clip does not fit both, so the posts differ in what they show and say.

  • “Parts leave the shop unphotographed”

    The best jobs go out in a crate and the only picture is a puddle under the machine. Photographing the part on the bed before it is wrapped, with a note on the material, costs a minute and feeds every channel.

  • “Every post should tell viewers what to send next”

    Someone who admires an inlay panel has no route to order one if the post ends with a logo. A line telling the viewer to send the DXF to the shop's number turns attention into a quote request.

What we do

What we deliver for waterjet cutting companies.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A shot list for each material

    What to film for stone, steel, rubber and glass, including the angle, the lighting and the caption.

    Result: The team knows what to capture on the day the job runs.

  2. A post template with a next step

    A repeating layout showing the material, the part and the way to send a file.

    Result: Every post ends with a clear way to ask for a quote.

  3. A channel for each buyer group

    Instagram and Pinterest for designers and stone, LinkedIn and WhatsApp groups for fabricators and engineers.

    Result: Each buyer group sees posts where it already looks.

  4. A permission note for customer work

    A short message asking the buyer if a finished part may be shown, with their name or without.

    Result: Customer parts are shown only with agreement.

  5. A saved library of cuts

    A folder of captioned photographs and clips sorted by material, ready for the website and the sales team.

    Result: One photograph serves the post, the page and the quote.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts and pieces to plan

Film the cut and caption it with the details a buyer scans for.

A jet through granite
A short video of the cut with the stone type named. Proof: your own machine and operator in frame.
Stainless profile with no heat mark
A close photograph of the edge beside a ruler. Needs the customer's permission if the part can be identified.
A gasket sheet coming off the bed
A reel of nested gaskets cut from one sheet, showing the layout and the material.
Inlay pieces laid out before assembly
Photographs of cut stone pieces arranged for a designer, posted with the designer's consent.
From drawing to part
A carousel showing the DXF, the nest and the cut part, to explain how a file becomes a quote.

Who it is for

This is written for these waterjet cutting companies.

  • Stainless steel and aluminium fabricators needing heat-free profiles
  • Granite, marble and tile inlay makers and stone dealers
  • Gasket, seal and rubber part manufacturers
  • Glass and acrylic signage and decor studios
  • Aerospace and defence parts suppliers cutting titanium and composites
  • Tool rooms and machine builders profiling hardened plate
  • Interior designers and architects ordering metal and stone panels
  • Laser and plasma shops passing on thick or reflective jobs

Before you decide

When this may not be the right fit.

  • Nobody can film on the shop floor safely, and a rushed video of a jet near the bed puts staff at risk.
  • Customers have not agreed to show their parts, so the page would carry only offcuts.

Before you decide

Agree the work. Know how to judge it.

Social media marketing for waterjet cutting companies: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from waterjet cutting companies. Anything missing is noted in the written scope, with who will supply it.

A phone and a safe camera spot
Someone must be able to film from a spot clear of spray and moving plate, with a phone that handles close video and a cover for the lens. Agree the spot with your operator before the first shoot. If no safe spot exists near the bed, we plan the shots from outside the cutting area and keep the operator's hands out of frame.
A list of customers who allow images
Write which customers have agreed to appear and which have said no. The permission list decides what we can post. Missing it, we show only your own test pieces and sample cuts.
Offcuts and sample parts to display
Keep offcuts and sample parts from clean jobs, in different materials and thicknesses, so they can be photographed on a plain surface in daylight. They are cheaper to shoot than live work and can be reshot when a post needs a new angle. If none are kept, we ask the operator to set aside the next few good ones.
Login to each social account
We need owner access to the channels you already hold, or a decision to open new ones. Without access we can plan but not post. Owner login matters because accounts opened by a former employee are hard to recover.
The person who answers messages
Name the person who replies to drawings and questions that arrive from a post, and who has the shop's quote route open while doing so. A viewer who sends a file and hears nothing will not try again. If nobody is named, we hold the posting plan until someone is.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Watch the machine run a real job

    We start on the shop floor, watching a cut from the loaded sheet to the finished part. We note which moments look striking, which materials show it best, where a camera can stand clear of spray and moving plate, and which jobs are dull to watch. You tell us which customers' work cannot be shown and which jobs are good to film this season.

  2. 2

    Write a shot list for each material

    From the visit we write a short list of shots for steel, aluminium, stone, glass and rubber: the first pierce, the jet moving along the line, the edge close up and the loaded bed. You approve the list so the operator knows what to record when the next job comes in.

  3. 3

    Choose where each buyer group looks

    Designers follow images and fabricators follow people. We choose one channel for each group from what your own enquiries show, and agree which videos suit each. You tell us where your buyers already message you, and that fixes the channel plan.

  4. 4

    Agree the permission note for customer work

    Before any customer part is filmed or posted, a short permission note is settled with the buyer, covering whether the name, the drawing or the finished part may appear. We draft the wording with you and you send it. Parts without a signed reply are posted without the customer's name, or left out of the library altogether.

  5. 5

    Set the next step under every post

    A video of a cut is only useful if the viewer knows what to send. We write the caption pattern: material, thickness, and what to send with the enquiry. You choose the number or message link used, and the same line closes every post.

  6. 6

    Count the files that came from posts

    We compare enquiries that mention a post, a video or a profile against the count recorded before we began. You see which materials and which channel brought drawings and which brought only likes, and you decide what the operator films next.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is social media worth it for an industrial service?
It suits waterjet better than other industrial work because the cut is visible. We judge it by quote requests that mention a post, which you can record at intake.
Who should film on the shop floor?
Someone on the team with a steady phone and access to the bed is enough. We set the shot list and captions, and the operator films the part before it is wrapped.
Can we show a customer's part without naming them?
Only with their agreement, since designers and fabricators recognise their own work. A pattern or logo may belong to the customer. Ask once, record the permission and hide any visible names.
What should the caption of a cut video say?
Name the material, the thickness and the bed size, then say how to send a file. A designer or fabricator watches for those details, and a caption that leaves them out turns the video into a spectacle with no next step.
Should the operator or a staff member do the filming?
The operator should film, because they know when the cut is worth showing and where to stand. We provide the shot list so the task is short and fits between jobs. If the operator is busy, a second person can film while the machine runs, but they must follow the same safety rules and work from the agreed spot.
How do we post a part when the customer has not agreed?
Post it without the name, without any identifying mark and without the drawing, or leave it out. Material and thickness are enough for a viewer. We keep the permission list beside the library, so nobody has to remember which jobs are free to show, and your own sample pieces cover the gaps.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.