Skip to content
GullySales

Wire manufacturers · CRM

Keep every dealer, electrician and builder in one list your whole team can read.

A CRM for a wire maker is a single record of dealers, electricians, builders and their orders, complaints and visits. GullySales sets up fields and habits that match how your salesmen work, using a tool your team will actually open.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For wire manufacturers

Where it usually goes wrong, and what we would do.

  • “Dealer knowledge lives in the salesman's head”

    The salesman knows which dealer pays late and which dealer wants a bigger slab. When that salesman leaves, the knowledge leaves too.

  • “Complaints sit in call logs, not on the dealer record”

    A short-coil complaint handled by one person is invisible to the next visitor. The next visit begins without knowing the dealer was upset.

  • “Electrician lists sit in phone contacts”

    Names saved on personal phones cannot be used by the company. A shared record can hold the electrician, the dealer who introduced them and the last scheme they took.

  • “A heavy tool gets abandoned in the field”

    If entering a visit takes longer than the visit, salesmen stop. The fields must be few and the entry must work on a phone.

What we do

What we deliver for wire manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Record structure

    Fields for dealer, town, market, wire types stocked, scheme slab, payment record and last visit.

    Result: Each dealer has one page that tells the next visitor the story so far.

  2. Electrician and builder lists

    Separate lists for electricians and builders, linked to the dealer or source that brought them.

    Result: You can see who introduced each electrician.

  3. Complaint linking

    A way to attach each complaint to the dealer, the batch and the reply given.

    Result: Complaints appear on the dealer record before a visit.

  4. Visit entry on the phone

    A short visit form the salesman fills in at the counter, with fields kept to the minimum.

    Result: Visit notes are entered the same day, from the field.

  5. Team habits note

    A one-page note on who enters what and when, and who reviews the record.

    Result: The team follows the same entry routine.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

The fields a wire maker needs on dealers, electricians, builders and complaints.

Dealer name, town and brands stocked
Filled by the field salesman at the first visit. It shows territory gaps and where a rival holds the shelf.
Last order date and credit position
Filled by the accounts desk. It tells the salesman whether the dealer is buying and whether a dispatch can be released.
Wire types stocked
Filled by the salesman. It shows which dealers hold house wire only and might take flexible or winding wire next.
Electrician list linked to a dealer
Filled at counter meetings. It places each electrician with the shop where they buy, so a message can go through that dealer.
Complaint, batch and resolution
Filled by the service desk. It holds the coil or batch complained about and what was done, so the dealer sees an answer and the factory sees a pattern.

Who it is for

This is written for these wire manufacturers.

  • House wiring and FR-grade wire manufacturers
  • Flexible wire and multi-strand cable makers
  • Winding wire and enamelled copper wire makers
  • Aluminium wire and conductor manufacturers
  • Solar and appliance wire makers
  • Wire makers selling through wholesale electrical dealers
  • Wire makers supplying builders and contractors directly
  • Wire manufacturers making for private labels

Before you decide

When this may not be the right fit.

  • Your field team works on paper and will not enter a visit, so a system would show only the orders accounts already record
  • You have a few dozen dealers who all know your owner, and a simple sheet already shows who buys what

Before you decide

Agree the work. Know how to judge it.

CRM for wire manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from wire manufacturers. Anything missing is noted in the written scope, with who will supply it.

Every existing dealer and contact list
Spreadsheets, diaries, visiting-card piles and phone contacts, in whatever state they are. We clean and merge them into one record. If some lists are withheld, the record starts incomplete, and a salesperson will carry on relying on memory for the dealers who are missing from it.
Phones for the field team
Each salesperson needs a phone that runs the tool and a data connection that works in the markets they visit. A basic smartphone is enough. Where phones are not available, entries are made in the office later, and the record trails the visit by a day or more.
A ruling on who owns each town
The sales head decides which salesperson owns which towns and dealers, in writing. Records are assigned from it. When ownership is disputed, two people log the same dealer and the history splits across two records, which defeats the purpose of one list.
Credit terms and scheme per dealer
Accounts can supply the agreed credit period, the scheme and the outstanding balance for each dealer. These sit on the record so a salesperson sees them before walking in. Without them, a visit begins with a phone call to the office to find out what the dealer owes.
A fixed slot in the sales meeting
A regular place in the team routine where the record is opened and read together, even for a few minutes. Without it, the record becomes a chore the office keeps up for the owner, and field staff stop entering visits once they see nobody reads them.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one dealer from first visit to reorder

    We pick a real dealer and follow every contact: the first visit, the scheme sheet left behind, the first order, the payment, the complaint about a short coil and the reorder. Each fact a salesperson had to remember becomes a field. You choose the dealer, and we ask for one with a complicated history, because an easy dealer teaches us nothing about where the record must hold detail.

  2. 2

    Sort phone contacts into three lists

    Contacts from diaries, phone books and old sheets are separated into dealers, electricians and builders, each with its own fields. Dealers carry credit terms, scheme and town. Electricians carry town and the wire they fit. Builders carry the project and quantity. You decide which of two duplicate records stays, since only you know which number the dealer actually answers.

  3. 3

    Set up the visit entry on a salesperson's phone

    We configure the tool so a visit can be logged in a few taps standing at the dealer's counter, with a photograph of the stock shelf or the rate sheet if wanted. Two salespeople test it on real visits and tell us what they skipped. Fields they ignore are removed, because a form too long for the field will simply not be filled in.

  4. 4

    Attach each complaint to its dealer

    Complaint calls, short-length claims and replacement coils are linked to the dealer they came from, so the next salesperson who walks in sees the open matter first. We agree who closes a complaint and who writes the closing note, and the sales head chooses how an unresolved complaint is flagged on the dealer's page.

  5. 5

    Load the cleaned dealer sheets by territory

    Existing spreadsheets are stripped of duplicates and dead numbers, then loaded town by town. Each salesperson reads their own towns on a phone and marks missing dealers or wrong owners before the list is released. Records nobody can confirm are held in a separate list, so the main record stays trustworthy from its first day.

  6. 6

    Read what the team entered against the old notes

    After the team has used the record, we count visits logged, dealers with a recorded reorder, complaints closed and electricians added, and set these against what the old notes could show. Dealer enquiries and builder rate requests are read separately. You decide which fields to trim, what to add and who opens the summary at the sales meeting.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM tool should we use?
One your salesmen will open daily. We look at your team size, phones and budget, and name real tools in use in India only after that conversation. Check the tool's current pricing and terms yourself.
Can we bring in our old dealer lists?
Yes, from sheets or accounting exports. We clean duplicates and town spellings first, so the new record does not inherit the mess of the old one.
Can we bring in our old dealer lists?
Yes, after cleaning them. Remove duplicates, add the town and the wire types stocked, and mark dealers who have stopped buying. An old list moved in untidy only spreads the mess. Ask each salesman to confirm the dealers in the territory before the list is loaded.
How do we keep a heavy tool from being abandoned in the field?
Keep it small. A salesman should be able to log a visit from a phone: dealer, stock seen, next call. Add fields only when someone uses the answer. A system the field team ignores becomes a record kept by the office alone.
Will the field team accept another tool?
They will if it saves effort at the dealer's counter and does not add a long form. We test with two salespeople first, remove whatever they skip and keep the visit entry to a few taps. Show them how it helps in their own towns, such as seeing an unpaid invoice before a visit. A tool that looks only like supervision gets abandoned within weeks of its start.
Can the record connect to our accounts software?
Sometimes, depending on the software. At minimum we can import an export of dealers, invoices and payments, so the record shows each dealer's credit position. A live link needs the accounts package to allow it, and we say so plainly after looking at it. You need not connect it at the start; a clean import and a refresh by one named person does the job.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.