Skip to content
GullySales

Wire manufacturers · Lead generation

Find the dealers, builders and contractors who will buy your coils again.

Lead generation for a wire maker means finding wholesale electrical dealers, builders and contractors who fit the wire you make, and recording each enquiry with its source. GullySales works on where those enquiries come from and how your sales team picks them up.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of electrical equipment manufacturers at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For wire manufacturers

Where it usually goes wrong, and what we would do.

  • “A dealer enquiry and a builder enquiry are different leads”

    A dealer asks about margin, scheme slabs and replacement of a faulty coil. A builder asks about rate, delivery date and the BIS mark. Treat both as one list and the salesman answers the wrong question to each of them.

  • “Towns without a dealer produce no enquiries at all”

    If nobody in a district stocks your wire, nobody there asks for it. Lead generation starts with a list of those towns and a reason for a wholesaler in each to try your coils.

  • “The electrician is a lead that never reaches you”

    The electrician picks the brand at the counter but never calls the factory. Unless a coil label, a QR code or a dealer introduces the group, you never learn who chose your wire.

  • “A bulk enquiry from a contractor goes cold in a day”

    A contractor asking for a rate asks several makers. The one who sends a clear rate sheet with certification and coil details is the one who is called back.

What we do

What we deliver for wire manufacturers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Territory lead list

    A list of towns, wholesale electrical markets and dealers, with the ones you serve marked apart from the ones you do not.

    Result: You can point to the towns where a first dealer is still missing.

  2. Dealer enquiry form and sheet

    A short form and one-page sheet for wholesalers asking to stock your wire, covering gauge range, schemes and payment terms.

    Result: A dealer's enquiry arrives with the town and the wire type already written down.

  3. Builder and contractor rate request page

    A page on your website where a builder states quantity, gauge and delivery town.

    Result: Each bulk enquiry reaches the sales team with the details needed for a rate.

  4. Coil label QR for electricians

    A QR code on the coil label that opens a registration page for the electrician.

    Result: The electricians who buy the wire start to appear in a list you own.

  5. Lead source log

    A sheet recording where each enquiry came from: dealer visit, website, coil QR, exhibition or referral.

    Result: You can see which source produced dealers who ordered a second time.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

What a wire maker records at the first contact with a dealer, builder or contractor.

Shop name, town and nearest wholesaler
Taken by the field officer or caller. It shows which towns have no stockist and which dealers already buy from a wholesaler in the same market.
Wire types the dealer sells
Note house wiring, flexible, multi-strand or winding wire. It tells the sales lead which of your ranges to offer first and where the dealer is thin.
Builder's project and purchase head
For a builder enquiry, record the project, the number of units and the person who buys. A bulk enquiry needs a rate sent to that person, not to the site office.
Electrician's name and the jobs they run
Taken at a counter meeting or camp. It builds a list of the people who pick the brand, who never reach the factory otherwise.
Source of the introduction
Mark whether it came from a salesman's visit, a dealer, a directory or search, so you see which route produced a first order.

Who it is for

This is written for these wire manufacturers.

  • House wiring and FR-grade wire manufacturers
  • Flexible wire and multi-strand cable makers
  • Winding wire and enamelled copper wire makers
  • Aluminium wire and conductor manufacturers
  • Solar and appliance wire makers
  • Wire makers selling through wholesale electrical dealers
  • Wire makers supplying builders and contractors directly
  • Wire manufacturers making for private labels

Before you decide

When this may not be the right fit.

  • You have no stock or delivery arrangement for the towns where leads would come from, so a dealer who asked for coils would wait and then stock a rival
  • Your sales team travels without a list of calls to make, and new leads would be visited only when a route happens to pass

Before you decide

Agree the work. Know how to judge it.

Lead generation for wire manufacturers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from wire manufacturers. Anything missing is noted in the written scope, with who will supply it.

Dealer ledger for the last year
We need names, towns, purchase dates and the order sizes, even if it sits in an accounts export or a handwritten book. Photographs of the pages are acceptable. Without it we cannot separate real dealers from one-time buyers, and the territory list would rest on guesses about where your coils already sell.
A decision on districts you can supply
Only you know which towns the transport, the stock and the credit terms really reach. Tell us the districts that are open and those that are closed for now. If this is missing, the forms invite enquiries from places you will have to refuse, which makes a poor first impression on a dealer.
Rate list the builder desk can quote
The person answering a contractor needs a current rate sheet by wire size and a rule for bulk orders. A rough sheet is fine as long as it is yours and dated. When it is absent, builder requests wait for someone to ask the owner, and a contractor comparing three brands moves on.
Mobile numbers of two coordinators
One person must receive dealer alerts and another, builder alerts, with a named backup for leave. These must be numbers that get answered during factory hours. If we have only a general office line, enquiries sit unread and the lead source log shows entries with no first call recorded.
Spare coils for the label test
We need a handful of coils that are not committed to an order, so the QR labels can be fixed and scanned in the stores. If none can be spared, we can only test with a printed proof, and a label that peels or fails to scan will be found only after it reaches an electrician.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the last year's dealer ledger

    We start with the dispatch register and the dealer ledger you already keep, and mark which towns bought coils, which bought once and which never appeared. That tells us where enquiries should be coming from and where nothing has ever arrived. You confirm the names of the wholesalers who count as your own, so we do not treat a one-off cash buyer as a dealer.

  2. 2

    Sit with the salespeople over the territory map

    We spread a district map in front of the field team and ask where each salesperson has met an electrician or builder who asked for a rate and never heard back. Their answers become a first list of places to look. You decide which districts the factory can supply properly, because an enquiry from a town you cannot serve is a promise broken.

  3. 3

    Agree the two enquiry routes

    A wholesaler wants margin and replacement terms, while a contractor wants a rate and a delivery date. We settle with you which person answers each kind and what the first reply must contain. The dealer form and the builder request page are then drafted around those answers, so nothing arrives at a desk where nobody knows what to say.

  4. 4

    Print the QR on a test coil

    Before anything goes out in volume, we attach the coil label with its code to a few coils in the stores and scan them ourselves. We send a dealer enquiry and a builder request through the live forms and watch where each lands. Your office staff confirm the alert reached the right phone and that the lead source log filled in the right row.

  5. 5

    Brief the field team on the handoff

    We walk the salespeople and the office coordinator through what a new enquiry looks like, who picks it up and what they write back into the log after the first call. A dealer lead goes to the area salesperson, and a bulk builder request goes to whoever quotes rates. You hold the final say on who owns a lead when two people claim it.

  6. 6

    Compare enquiries with the starting ledger

    We set the enquiries that arrived against the baseline from the first step: dealer calls, builder rate requests and coil scans, each with its source. We look at which towns produced a first order and which enquiries stalled before a quote. You then decide whether to widen the territory, change the dealer terms or answer the stalled ones differently.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we chase dealers or builders first?
Start with whichever the sales team can serve properly. A dealer needs steady supply and a scheme, and a builder needs a rate sheet. We help you choose after seeing your capacity and territory.
Can lead generation replace salesmen visits?
No. Enquiries from the website and coil QR give the salesman a warm start, but a dealer is signed at the counter. The visit plan and the lead list work together.
How do we keep an electrician lead alive if they never contact the factory?
Record their name and the dealer they buy from, then reach them through that dealer and a message about the coil. The electrician picks the brand at the counter. A list of them lets you send a useful note on cut length or a job, which is more than a scheme.
What does a wire maker's own constraint on leads look like?
Supply. A new dealer lead is worth little if the nearest stock point is far and the first order is late. Check the delivery route and the dealer's credit position before spending on a lead, since a failed first order loses the dealer for good.
Who answers the first call when a dealer enquiry arrives?
The area salesperson who covers that town answers it, with the office coordinator as backup. We write this into the handoff so the first reply never depends on who happens to be free. The reply covers the margin, the scheme and how a defective coil is replaced, because that is what a wholesaler is deciding on. You choose the names, and we only make sure the lead source log shows who took each enquiry.
What if our current salespeople already hold the dealer relationships?
Their relationships stay with them, and the lead list is built to add new towns and new buyers, not to replace anyone. We record existing dealers in the ledger so an enquiry from one is routed to the salesperson who already serves them. Sit with the team first and tell them what the forms are for. A salesperson who sees a lead arrive with a source attached soon stops worrying about being bypassed.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.