Skip to content
GullySales

ISO certification consultants · Follow up systems

Chase the quote that went quiet and the audit date nobody remembered.

A follow-up system for an ISO consultancy is the set of fixed steps that follow every enquiry, quote and passed audit. GullySales works on who contacts whom, when, with what message and where the result is recorded.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of business consultants at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For ISO certification consultants

Where it usually goes wrong, and what we would do.

  • “The quote goes out and silence follows”

    A plant owner receives a quote, shows it to a partner or a buyer and gets busy with production. Without a planned follow-up, the quote sits. The consultant assumes a no, and the owner assumes the consultant lost interest.

  • “The first call needs a written recap”

    The scoping call covers the reason, the standard, the sites and the dates. A short written recap after it confirms what was heard and corrects mistakes early, before the quote is built on them.

  • “Passed audits are the best moment”

    A client who has just cleared the certification audit is relieved and grateful. That is the time to ask for an honest review, to mention the next standard and to ask who else in their supply chain faces the same demand.

  • “Renewal reminders reach the wrong person”

    The surveillance audit letter goes to a quality manager who has since left. A follow-up system that records two contacts per client, and checks they are still current, avoids the surprise.

What we do

What we deliver for ISO certification consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Post-enquiry follow-up steps

    A written sequence from first reply to quote, with the message for each step.

    Result: No enquiry goes unanswered.

  2. Quote follow-up routine

    A fixed set of check-ins after the quote, each asking a useful question rather than just a nudge.

    Result: Quotes get an answer, yes or no.

  3. Recap template for scoping calls

    A short message confirming the reason, standard, sites, dates and the client's own responsibilities.

    Result: Misunderstandings surface before the quote.

  4. Passed-audit sequence

    A thank-you, a review request, a note on next standards and a referral question for each client after certification.

    Result: The best moment in the engagement is used.

  5. Renewal and contact-check calendar

    Dates for surveillance and recertification contact, with a check that the named contacts are still current.

    Result: The client hears from you before the certification body does.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Chase the quote that went quiet and the date nobody remembered.

Scoping call summary
Sent after the call with the standard, the scope and the client's own tasks, so the quote is read against something agreed.
Quote follow-up question
A note asking whether the client has discussed scope with the customer who demanded the certificate, which is what holds it up.
Document-preparation reminder
Sent to the quality contact on what they promised to prepare, because the client's team is what holds up an audit.
Pre-audit review note
A message offering a review of records before the audit date, recorded against the date the certification body gave.
Surveillance reminder
A message to the client ahead of the next surveillance visit, sent before the client thinks of it.

Who it is for

This is written for these ISO certification consultants.

  • Quality management system consultants
  • Multi-standard ISO consultancies
  • Consultants serving manufacturing
  • Consultants serving IT and services
  • Consultants for export-oriented businesses
  • Training providers combined with consulting

Before you decide

When this may not be the right fit.

  • Your quotes do not state what the client's own team must do, so a follow-up would only repeat the price.
  • You promise audit dates the client's staff cannot meet, so reminders would chase deadlines you set too tight.
  • No one logs why a client chose someone cheaper, so follow-ups would not teach the firm anything.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for ISO consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from ISO certification consultants. Anything missing is noted in the written scope, with who will supply it.

Last year's quotes with dates and outcomes
We need the date sent, the client and the result, even if the result is unknown. A spreadsheet or folder listing works. Without it, the opening figures are estimates and the review is less trustworthy.
A sample of scoping call notes
Two or three sets of notes show how much is written down. Names may be removed. Without samples, the recap template is built on assumptions. Notes in a coordinator's own shorthand are fine; we read them with you.
The contact person for each client
A renewal reminder sent to the wrong person is wasted, so we need the name of the person who pays and the one who manages the system. A client sheet will do. Where this is missing, the calendar waits.
A partner to approve the message wording
Messages go out under the firm's name, so one partner must read and agree them. Name the person and agree how drafts reach them. Without an approver, we use only the plainest wording. The approver should also decide whether messages carry a partner's name or the coordinator's.
Your rule on dealing with cheaper offers
Decide in advance whether you reduce your fee, explain the difference or let the client go. Only the partners can make this choice. Without a rule, the reply to a cheaper offer is left blank.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Open the quotes that never got a reply

    We begin with last year's quotes that went silent and sort them by the standard and by who sent them. You tell us which silences you know the reason for. We then count how many were followed up and by whom, which gives the opening figures for the follow-up work.

  2. 2

    Read the notes of a scoping call

    We read how a first call is currently recorded and where the details of the customer's demand are lost. You show us a typical set of notes. We design the written recap that goes to the client after each call, so both sides keep the same account of what was agreed. The recap also lists documents the client promised to send, so a missing document is not mistaken for a lost client.

  3. 3

    Decide who follows up and through which channel

    Some clients reply on email, others on WhatsApp, and some only through the purchase head. We settle who in your firm owns each quote and the channel used to reach the client's decision maker. You approve. The rule is written on one sheet that coordinators and partners both follow.

  4. 4

    Write the messages for each stage

    We draft the recap after the call, the nudge after a quote, the note after a cheaper offer and the thanks after a passed audit. You edit them into your own voice. Each message has one purpose and one question, so the reader is never asked for several things.

  5. 5

    Set up the passed-audit and renewal calendar

    We build the calendar of contact after certification: a note of thanks, a request for a referral, a check on the contact person and a renewal message sent to the person who pays. You decide who sends each one. The contact details are confirmed so reminders do not go to someone who left. A passed audit is the moment a client is willing to name you to others, so the request for a referral is placed there.

  6. 6

    Test with live quotes and read the outcome

    Coordinators use the routine on open quotes while we watch where it fails. After they have used it for a while we compare quotes answered, quotes won and reasons recorded with the opening figures. You decide which messages to change and which routines to drop.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

What is the right number of times to chase a quote?
Agree a fixed number of check-ins and a respectful final message that closes the loop. Too few loses the quote, and too many irritates the buyer. We write messages that add something each time.
Should we follow up by email or over WhatsApp?
Use whichever the client used to reach you. A quote goes in writing, with a short WhatsApp note to say it has been sent. Keep a record in the CRM either way.
What if a client says they are going with a cheaper consultant?
Ask what the other quote covers, and offer to compare it against the sites, standards and accreditation. Do not criticise the rival. If the client still goes elsewhere, leave the door open.
What if the client says they are going with a cheaper consultant?
Ask what the other quote covers and what the client's team must do under it. Cheap quotes can leave out records, internal audits or support at the audit. Do not criticise the other firm. Offer to compare the scope in writing, and leave the door open.
How do we avoid sounding pushy after a quote?
Give each message a reason that helps the client: a clarification of scope, a date for a decision they mentioned, a document they asked for. Do not send a message that only says you are checking in. If the client has said they will decide after a customer's meeting, ring after that meeting. We write messages around a question the client has already raised, so the contact is expected and does not feel like pressure.
What should we do when the client does not reply at all?
Follow the agreed steps once or twice, using a different person or channel if the first is silent, and then close the quote in the record with the reason unknown. A closed quote is not forgotten; it goes onto a list to be reviewed when a related event occurs, such as a customer audit. Chasing without end damages your standing with the purchase head and, through them, with their referrers. We write the closing message so it keeps the door open.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.