Skip to content
GullySales

ISO certification consultants · Lead generation

Find the plants that were told this week to get a certificate.

Lead generation for an ISO consultancy means reaching businesses at the point where a customer, a tender or a regulator has asked for a standard. GullySales works on the sources that carry that moment, the scoping questions that qualify it and the record that stops an enquiry going cold.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of business consultants at work in India

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For ISO certification consultants

Where it usually goes wrong, and what we would do.

  • “The trigger is a purchase term, not a wish”

    A manufacturer rarely wakes up wanting ISO 9001. A buyer writes it into the vendor terms, and the owner starts searching that afternoon. Lead sources that put you in front of that search, or in front of the people who hear about the term first, beat general advertising.

  • “Referrers see the need before you do”

    An accountant filing for a supplier, a certification body scheme manager and an association secretary all hear who has been asked for a certificate. They send the lead to whoever they remember. A consultant nobody has briefed gets nothing from them.

  • “Wrong-fit enquiries eat the partner's day”

    Someone asking for a cheap certificate with no audit, or for a standard you do not handle, takes a long call and leaves. A short filter at the first touch keeps the partner's calls for businesses that can actually engage.

  • “Past clients are the cheapest lead”

    A plant certified earlier needs surveillance support, and may need an environmental or safety standard next. Those leads sit in old invoices and are reached by nobody.

What we do

What we deliver for ISO certification consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. Source map of where ISO enquiries start

    A list of the places your past clients first heard of you: searches, referrers, associations and training sessions.

    Result: You can see which source deserves the next hour of effort.

  2. Enquiry form and call script with the reason first

    Questions on who asked for the certificate, which standard, how many sites and the date the customer set.

    Result: Every enquiry reaches you with what the quote needs.

  3. Referrer briefing sheet

    A one-page note for accountants, auditors and association secretaries stating the standards you prepare clients for and who to call.

    Result: A referrer knows exactly what to send you and when.

  4. Old-client reactivation list

    A list built from earlier invoices showing each client, the standard held and the next audit or standard due.

    Result: Past clients are contacted before a rival reaches them.

  5. Lead record by source and standard

    A shared sheet logging each enquiry, its source, the standard asked for, the quote sent and the outcome.

    Result: You can compare sources by engagements won, not by enquiries received.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Ask why the certificate is needed before anything else.

Who demanded the certificate
A customer, a tender, an export buyer or the owner's own wish. The reason decides the standard, the urgency and the tone of the scoping call.
Standard asked for
ISO 9001, 14001, 45001 or another, as the caller states it. Some callers name the wrong one, and the consultant corrects it on the call.
Size and shape of the unit
Headcount, number of sites and whether it makes or serves. It sets the scope of the work and whether a single consultant can handle it.
Existing system or none
Whether the plant has any procedures, records or a previous certificate. A renewal and a first-time client are scoped differently.
Referrer's name
The CA, auditor or customer who sent the enquiry, noted at once so they can be thanked and told how it went.

Who it is for

This is written for these ISO certification consultants.

  • Quality management system consultants
  • Multi-standard ISO consultancies
  • Consultants serving manufacturing
  • Consultants serving IT and services
  • Consultants for export-oriented businesses
  • Training providers combined with consulting

Before you decide

When this may not be the right fit.

  • No partner can take a scoping call within the day, so a fresh enquiry would go to the next consultancy that answers.
  • You cannot yet say which standards and sectors you handle well, so leads would arrive for work you would have to turn away.
  • You plan to buy leads from a directory without checking who they are, so your calls would go to people comparing price lists.

Before you decide

Agree the work. Know how to judge it.

Lead generation for ISO consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from ISO certification consultants. Anything missing is noted in the written scope, with who will supply it.

Proposals and engagement letters, past year
These show what clients bought and why, in the words they used to you. Scans or a folder of files are fine. If confidentiality is a worry, strip the client names but keep the standard and the reason. Without them, the source map rests on memory alone.
A list of the referrers you know
Accountants, bankers, auditors, associations and trainers who have sent work or could. Names and the way you know each are enough. We need this list to brief referrers, and without it the plan leans on search and directories only.
A partner who takes the first scoping calls
Someone senior enough to say no to a poor-fit enquiry must be named, with the days they are free to take calls. Without a named person, we keep the enquiry form simple and route every call to a coordinator for notes only.
The list of past clients and their audit dates
Old clients are the cheapest source of new work and referrals. The list needs the standard held and the surveillance or renewal date if you know it. A sheet from a coordinator is enough. If it is absent, the reactivation list cannot be built.
Your policy on referral thanks
Only you can decide whether you thank a referrer with a gift, a favour or nothing, and what your own adviser would advise about it. Settle this before any referrer is briefed. Until then, we write the briefing without any mention of reward.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Read the last year's engagement letters

    We begin with the signed proposals and engagement letters of the past year and note, for each client, which standard was bought and what pushed them to buy: a customer's vendor form, a tender clause or an auditor's remark. You tell us which of those were really your referrals. The result is a list of triggers in the clients' own words.

  2. 2

    Trace each client to its referrer

    Next we ask your partners and coordinators who introduced each client: an accountant, a banker, a certification body's auditor, an association secretary or a past client. You fill the gaps from memory. We record the names in a sheet, so the sources that really feed the firm are visible and the guesses are marked as guesses.

  3. 3

    Choose which sources deserve a partner's hour

    Partners cannot attend every meeting, so we set the sources side by side and you pick the few worth personal attention. Directories you pay for are tested against the engagements they produced. We write down what each chosen source needs from you, whether a briefing, a coffee or a short note.

  4. 4

    Write the scoping questions that open the call

    We draft the first questions a coordinator asks when an enquiry arrives: which standard, who asked for it, what the customer's form says, whether a certification body is already chosen. You correct the order. The questions begin with the reason for the enquiry, so a vague curiosity is told apart from a deadline.

  5. 5

    Send a test enquiry through every route

    We place a made-up enquiry through the form, the phone and each referrer's route, and watch who answers and how the details are recorded. You see where a message stalls. Anything that reached the wrong partner is rerouted before a real client meets the same gap.

  6. 6

    Read the lead record against the opening figures

    We compare enquiries by source and by standard with the figures noted at the start: calls, qualified scoping calls, proposals sent and engagements signed. Which sources get more effort and which are dropped is your decision. Enquiries that were declined as a poor fit are counted too, since they show where the wrong people are finding you.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we buy leads from a directory?
Run it as a trial, not a standing arrangement. Note which standards and cities the directory leads ask for, then compare the engagements won against the cost. Keep the source column in your record so the answer comes from your own numbers.
Do referrers expect a payment for sending work?
Some professionals accept no payment, and some professional codes bar it. Ask each referrer what is acceptable, and repay the favour with prompt updates on their client and a short note when the audit is passed.
Which enquiries should a partner take personally?
Take the calls with a stated deadline, more than one site, or a second standard likely to follow. Hand simple single-site queries to a coordinator working from the scoping sheet.
Should we take every enquiry for a certificate?
Take the ones where you can name the standard, the sector and the owner's reason. A caller who wants a certificate without a system behind it is asking for something you cannot honestly provide. Say so on the call, and record the enquiry.
What should the enquiry form ask that a generic form does not?
Ask which standard, why it is needed now, whether a customer or tender asked for it, and whether a certification body is already chosen. Those four answers separate a business with a deadline from one browsing. Add the size of the site and whether the business already holds another certificate. Do not ask for a budget on the first form; a wrong guess there turns people away. The answers go straight into the lead record with the source.
How do we deal with enquiries from consultants and students?
Place a question near the top asking who the enquiry is for, and route anything not from a business to a short, polite reply instead of a partner's calendar. Competitors and students waste scoping time. We write the reply so it is courteous and offers a guide or training session where that fits your offer. We do not delete or ignore these messages; we sort them into a separate list so the partners never see them as leads.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.