Skip to content
GullySales

IT staffing and contract hiring firms · Digital marketing

Reach hiring managers and candidates on the channels each one uses.

Digital marketing for an IT staffing firm is the use of search, LinkedIn, job boards and email to bring both companies and candidates to a conversation. GullySales works on channel choice, tracking and what happens after the enquiry.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Recruitment colleagues discussing candidate requirements and interview notes

What digital marketing means

Digital marketing is the combined work of search, social media, advertising and website channels running together rather than as separate projects with separate people. GullySales runs these as one connected system so a change in one channel, such as a new offer, is reflected everywhere at once.

Last updated 14 Nov 2026.

For IT staffing and contract hiring firms

Where it usually goes wrong, and what we would do.

  • “Two audiences need two plans”

    A campaign for hiring managers and one for engineers differ in channel, message and measure. Treat them separately.

  • “Job boards bring volume and noise”

    Naukri and similar boards bring applications that are in large part unsuited. Judge a board by profiles submitted and joinings, not applications.

  • “LinkedIn is where managers and engineers meet”

    Both sides use it. A clear page, relevant posts and direct messages to the right roles work better than broad ads.

  • “The count that matters is joinings”

    Applications and enquiries are early steps. The business is paid at joining, so track every channel to that point.

What we do

What we deliver for IT staffing and contract hiring firms.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A channel plan for each audience

    Which channels to use for companies and for candidates, with the measure for each.

    Result: Spend follows the audience.

  2. Tracking from source to joining

    Each requirement and each candidate tagged by source, and followed to a submission or joining.

    Result: You know which channels produced joinings.

  3. Landing pages for campaigns

    A page for each skill or hiring model, with one route to submit a requirement.

    Result: Campaign visits land on a relevant page.

  4. An email programme

    Messages to clients and to consenting candidates about roles and hiring models.

    Result: The owned list is used with consent.

  5. A review of cost against joinings

    Each channel's spend set against submissions and joinings, discussed with the owner.

    Result: Spending decisions rest on placements.

  6. A hiring-model comparison page

    A plain page setting out contract, contract-to-hire and permanent hire, what the client signs and how a replacement is handled, so a hiring manager chooses a model before the call.

    Result: Calls begin with a model chosen, not a lecture.

  7. A consent line on every candidate form

    A consent line on the profile form and the job-alert sign-up that says how the CV is stored and shared with clients, with a way to ask for removal, so the email list is built on permission.

    Result: Every candidate email address has a recorded consent.

How the result is measured

  • Enquiries across channels
  • Cost per enquiry overall
  • Channel mix by contribution

Recorded as a baseline before work starts, so every later report has an honest comparison.

Searches your buyers type

The searches and channels that reach each side of the placement.

hire contract developers in Hyderabad
A client landing page with a requirement form that asks the stack, level and hiring model before anything else.
react developer jobs near me
A candidate role page with a short apply form and the consent line shown before the submit button.
staffing partner for GCC in India
A LinkedIn and search combination aimed at companies setting up a centre, pointing to the hiring-model page.
IT contract payroll services India
A page for a company that wants to engage contractors without running payroll, naming what you handle.
Naukri or LinkedIn job post for a role
A paid job-board listing sent to a tracked page, so that a joining can be traced back to the post.

Who it is for

This is written for these IT staffing and contract hiring firms.

  • Contract developers and testers for product companies
  • Contract-to-hire engineers for services firms
  • Permanent hiring for startups and GCCs
  • Data, cloud and DevOps specialist hiring
  • IT support and infrastructure staff
  • SAP, Salesforce and other platform consultants
  • Bulk campus and fresher hiring support
  • Third-party payroll for contract IT staff

Before you decide

When this may not be the right fit.

  • You cannot trace an enquiry to the channel it came from, so spend would be judged by guesswork.
  • Your recruiters lack the bench for the skills a campaign would advertise, and a campaign would only bring in roles you cannot fill.
  • You run on one anchor client who supplies every requirement, so new channels would bring a mix of work you are not set up for.

Before you decide

Agree the work. Know how to judge it.

Digital marketing for IT staffing firms: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring a recent won order and an enquiry that went nowhere. Trace how each buyer found you, what they asked, and who handled the next step. A channel list alone will not explain the difference.

Make the scope clear

Choose one offer and one buyer group first. Agree which part needs attention: being found, getting a useful enquiry, or turning an enquiry into an order. Separate recommendations from the work required to carry them out.

Check the work in use

A useful plan names the first change, its owner, the evidence behind it, and the number that will show whether it worked. Ask what has deliberately been left out and why.

Know when to change course

If your team cannot answer the enquiries it already receives, improve that handover before buying more traffic. If the offer itself is unclear, test it with buyers before adding channels.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from IT staffing and contract hiring firms. Anything missing is noted in the written scope, with who will supply it.

The last year's list of joinings
Bring the placements of the last year with client, skill and source if known. Without it we cannot tell which channel works and we would be guessing from enquiry counts. A rough list built from invoices will do, and where the source is unknown the plan marks it unknown and does not invent one.
Budget for the period decided by the owner
Decide the amount you are willing to spend on advertising and job boards before we plan channels. We do not set it. A plan without a ceiling spends where noise is cheapest, and the cheapest clicks for a staffing firm come from job seekers and not from hiring managers, which is the wrong audience for a company-side campaign.
Login access to every channel in use
List the job boards, the LinkedIn page, the email tool and the site analytics, with who holds each login. Unknown owners are common in older firms, and recovering them takes time that the plan must allow for.
A decision on candidate consent lines
Candidate forms and ads must say what you will do with a CV. Have your adviser's view ready, or tell us you have none. We write around it and mark the line for the adviser.
A recruiter for each campaign skill
A campaign needs a recruiter who can take the replies the same day and speak about the skill. If no one is free, the campaign waits.

How it works

How the digital marketing work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Count joinings by source in the last year

    We ask for the list of joinings and where each requirement or candidate came from: referral, job board, LinkedIn, search, a client's repeat order. You help us mark the ones nobody can trace. The count becomes the starting figure, and the spread of sources shows which channel earns a fee and which only fills the inbox.

  2. 2

    Plan a client half and a candidate half

    A company and an engineer use different channels, so the plan has two halves. With the owner we decide how much attention each side gets this time, depending on whether the desk is short of requirements or short of candidates. The decision is written down so channels are not chosen out of habit.

  3. 3

    Check the tracking and the forms

    We open the requirement form, candidate form and phone numbers on the site and test that each enquiry is recorded with its source. Where tracking is missing, we add it before spending anything. The owner confirms who reads the enquiries. What exists afterwards is a chain from first click to joining.

  4. 4

    Write one landing page per campaign

    A campaign for a skill needs its own page that speaks to the hiring model and the consent line for candidates. We draft each with the recruiter who fills that skill. You approve the wording about your firm. Pages for companies and pages for candidates are kept apart.

  5. 5

    Approve the messages and the email list rules

    Before an email or advert is released, the owner reads it for claims, client names and candidate data. We agree which lists may be emailed and on what consent. Messages that fail the check are rewritten. Nothing goes out until this is signed.

  6. 6

    Reconcile spend against joinings

    At the end we set the cost of each channel beside the joinings it produced, using the starting count. You decide which channel to continue, using fees earned and not enquiries received. No result is promised, and a channel with no joinings is stopped or changed.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Do we need paid ads for IT staffing?
Not necessarily. Referrals, LinkedIn outreach and search pages may produce enough. Test paid channels on a small scale and judge them on placements, because a campaign that fills the inbox with CVs and yields no joinings has only cost your recruiters hours.
Which job boards are worth paying for?
Those whose submitted profiles turn into interviews and joinings. Keep a record of each board's results by skill and city and drop those that do not produce placements. Check each board's current rules before you renew a plan.
How do we measure a campaign for candidates?
By submissions, interviews and joinings from that campaign, not by applications. A campaign that attracts unsuited applicants costs your recruiters time, so also record how many profiles a recruiter rejected, because that count is the real cost of the channel.
Which job boards are right for a contract role?
Test with the board where your target engineers already look. A board with a large applicant pool gives volume, while a narrower one gives better-matched profiles. Compare each by joinings, not by applications, and check each board's current rules before posting client roles.
Which should we fix first, requirements or candidates?
Fix the side that limits your fees. If you have more requirements than candidates to fill them, extra company enquiries add work but no fee, so start with the candidate side for that skill. If your bench is full and orders are thin, begin with the company side. Your joinings list and the open requirements sheet show which it is. We read both with you and decide together, and the plan changes if the position changes during the work.
Should the same person run both sides?
Not if it can be avoided, because the work differs. A business development person speaks with hiring managers and vendor managers; a recruiter speaks with engineers. One person doing both leans towards the louder side. In a small firm one person may cover both, and then the plan keeps their tasks separate in the record and in the week's order of work. The owner decides, and we adjust the plan to the people available.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.