Skip to content
GullySales

Notary and stamp paper vendors · CRM

Keep a record of who sends work and who is waiting on a paper.

A CRM for a notary or stamp paper vendor is a simple record of enquiries, repeat senders and unfinished cases, so no half-done document is forgotten and no regular agent is treated as a stranger. GullySales sets up the sheet or tool and the habit of filling it.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A sales team agreeing pipeline stages before a CRM is configured

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For notary and stamp paper vendors

Where it usually goes wrong, and what we would do.

  • “The register records documents, not people”

    A statutory register of notarial acts is kept for another reason. Nothing in it tells you who sent the work or who is waiting to return.

  • “The phone is the database”

    Numbers sit in a call log and WhatsApp chats, and a new assistant cannot find the agent who sent forty agreements last year.

  • “Unfinished cases vanish”

    Someone who left to fetch a proof is not noted. The case goes to another table.

What we do

What we deliver for notary and stamp paper vendors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A one-sheet enquiry and case record

    Columns for date, document, source, status and the item still missing, kept on a shared sheet.

    Result: Every open case has a note.

  2. A senders list

    A page for each agent, typing centre, advocate and firm with the work they send and the dates they are busy.

    Result: Regular senders are known by name.

  3. A reminder routine

    A daily look at the cases waiting for a proof, with a message to each.

    Result: People return to the same table to finish.

  4. A keep-and-delete rule for personal data

    A written note on what customer information is stored, for how long and who can see it.

    Result: The record helps work without exposing customers.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to record, and when

What to write down when an enquiry arrives, and what to add as the case moves.

Document and date needed
Recorded on the first contact by whoever answers. It lets you plan the day and pick out the urgent ones in the morning.
Source of the enquiry
Filled by whoever answers: Maps, agent, typing centre, friend. After a season it shows which senders deserve a visit.
Missing item
The one paper or person still needed. Added at the end of the visit by the person at the table, so a call-back is specific.
Consent to message
A yes or no noted at the table. It decides whether you may send a reminder or a seasonal note later.
Do you need software yet?
Not if one shared sheet is being filled every day. Move to a CRM when two people are updating it and rows are being missed or overwritten.

Who it is for

This is written for these notary and stamp paper vendors.

  • Notaries sitting at a district or city civil court complex
  • Stamp paper vendors licensed to sell at sub-registrar offices
  • Notary and typing centres near the passport office or an RTO
  • Notary offices run by advocates in a commercial street
  • Table-and-counter stamp vendors in a town market
  • E-stamping and franking counters for rentals and agreements
  • Notary services inside a document or photocopy shop
  • Home-visit and doorstep notary services in a metro
  • Notary tables serving a university or college area
  • Counters serving an industrial area or SEZ with company paperwork

Before you decide

When this may not be the right fit.

  • Nobody at the table has the minute needed to write a line per customer, so a tool would sit empty.
  • You have no rule on keeping customers' IDs or addresses, which should be settled before any record is built.

Before you decide

Agree the work. Know how to judge it.

CRM for notary and stamp paper vendors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from notary and stamp paper vendors. Anything missing is noted in the written scope, with who will supply it.

The register for the last busy month
The record is built from the register, so we need to see it. A photograph of a busy month's pages with names covered will do. Without it, the sheet starts empty and fills only from new visits, and the first weeks cannot show which documents and senders bring repeat work. The photograph also shows which columns are left blank on busy days, so we can drop them.
A list of agents and firms who send work
The senders list needs the names of the agents and small firms who bring work. A list from memory, with a note of what each sends, is enough to begin. Without it, the list starts empty and fills as senders arrive, which means the first rush is handled the old way.
A decision on who may see the sheet
The sheet holds names and numbers, so decide who sees which parts. The practitioner may see everything, the counter staff only open cases. Without that decision, everyone shares one login, nobody can tell who changed a row, and a leaving member of staff takes the whole list.
Your adviser's view on keeping data
Data rules change, and a notary may owe duties of confidence to clients. Ask your adviser how long to keep records and what may be stored, then tell us. Without an answer, the keep-and-delete rule stays provisional and we advise holding only name, number and document type.
A person who owns the sheet
A record without an owner decays within weeks. Name the person who checks that open cases are filled in and a stand-in for days the table is shut. Without an owner, the register becomes the only record again, and half-done cases drop out of sight as they do now.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Copy the register headings onto one sheet

    We begin from what the register records and what it leaves out. You show us the columns: document, date, name. We note what is missing: phone number, how the person arrived, whether the case was finished, who sent them. What exists afterwards is a one-page list of fields that turn the register into a record of people and cases. The headings you already use are kept, so the staff do not have to learn a new layout.

  2. 2

    Design the one-sheet enquiry and case record

    We build a single sheet with a row for each enquiry and each case. It records the document, the contact, the source, the missing item and the state: open, waiting, done. You strike any column the counter would not fill. A sheet that is short enough gets used. We also agree where the sheet lives, on the table's phone or a shared drive, so that a case is not recorded on a private device only.

  3. 3

    Create the senders list for agents and firms

    We list the agents and small firms who bring work, with what each needs and when they are busy. You decide who counts as a regular sender. The list lets the staff recognise a regular and treat them as a partner, not a stranger.

  4. 4

    Write the reminder routine for unfinished cases

    Each open case gets a next step and a person to take it. We write the routine: who checks the sheet, which cases need a call and what is said. You choose the person. Without a routine, an unfinished case sits in the sheet unread. The routine also says what the counter does when a customer cannot be reached.

  5. 5

    Write the keep-and-delete rule for personal data

    A case record holds a name and a number. We write a short rule on what you keep, who sees it and when it is deleted. Your adviser checks it against the data rules that apply to you, and the staff receive a copy. Identity papers are never copied into the sheet. The rule also covers the old register pages, which are kept as the table's professional rules require and not copied into the sheet.

  6. 6

    Train the counter and check the record

    We sit with the counter staff while they fill the sheet from real visits. Later, we compare open cases closed, repeat senders recognised and call-backs made with the figures noted before the sheet. You mark what stopped working and we trim the columns. We do not promise a number of cases. We also look at which cases stayed open longest and ask what was missing, since that decides the next reminder.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet enough?
For one table, yes. A shared sheet with a few columns does the job if it is filled daily. Software starts to matter when several people update it or when reminders must go out without anyone remembering.
How do we get the counter staff to keep the register up to date?
Keep it to five columns and make the morning call-back list come from it. Staff fill what they use. A record that nothing depends on goes stale in a week.
What do we do with WhatsApp chats?
Note the outcome in the record and keep the chat for reference. Do not rely on scrolling chats to find a case. Use a business number so the chats stay with the table when staff change.
Who owns the customer data?
The table does, and also carries the duty to keep it safe. Store it in an account in the table's name, limit who can open it and delete what you no longer need.
What should never go into the record?
Copies of identity papers, account numbers, the contents of a document and anything a client told you in confidence. The record holds a name, a number, the document type, the source and the state of the case. Anything beyond that creates a risk you would have to protect. We write a short list of what is never entered and put it at the top of the sheet.
How do we record an agent who brings batches?
Give the agent one row in the senders list and tag each case they send with their name. The sheet then shows how many cases a sender brings and what they need. You do not need to record the agent's clients beyond what the case needs. We write the tag in the sheet and teach the counter to add it when the agent says who sent them.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.