Skip to content
GullySales

Aluminium fabrication contractors · CRM

Keep every measured site and every sent quote on a record someone owns.

A CRM for an aluminium fabrication contractor is the record of enquiries, measurement visits, quotes and orders, with a named person against each. GullySales sets this up in a tool your office will actually use, whether a shared sheet or a simple CRM.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Fabricators inspect laser-cut panels and bent metal enclosures

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For aluminium fabrication contractors

Where it usually goes wrong, and what we would do.

  • “The quote lives in the estimator's phone”

    The person who measured the site holds the rate and the promise made. When they are on another site, nobody else knows what was said, and the buyer is left waiting.

  • “Contractors and dealers are the repeat source”

    An interior firm that gave you one floor may give another. Without a record of who gave what and when, you cannot see which contacts to visit again.

  • “Paper measurement slips go missing”

    Dimensions, sections and hardware written on a slip are needed again when the order is confirmed. A lost slip means a second visit and a doubtful buyer.

  • “Repair history is never kept”

    A track you repaired last year is the first thing the owner mentions when ordering new windows. A record of the earlier visit shows you remember them.

What we do

What we deliver for aluminium fabrication contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A sheet or CRM set up for your office

    Fields for site, type of work, source, measurement date, quote sent, owner and result.

    Result: Every site is one row someone is responsible for.

  2. A stage list that matches your work

    Enquiry, visit booked, measured, quote sent, negotiation, won, lost, in fitting.

    Result: Everyone uses the same words for where a job stands.

  3. Photographs and measurements attached

    Site photographs and measurement notes stored against each record.

    Result: The order can be confirmed from the record, without a second visit.

  4. A contact record for contractors and dealers

    Each firm with the people, the jobs given and the last visit.

    Result: You see who has not been visited.

  5. A short training for your office staff

    How to enter an enquiry, update a stage and close a job.

    Result: Your staff can keep the record without outside help.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

Keep the fields that decide whether a quote is won.

Site address and stage
The estimator fills it at the first call and updates it after the visit. It shows which sites are ready to measure and which are waiting for civil work.
Measurement date and who measured
The estimator fills it on the day. When a figure is questioned later, you know who took the readings and when.
Quote version and date sent
The office fills it each time the quote changes. It stops two versions going out and shows how long a quote has been open.
Contractor or dealer behind the job
The estimator names who sent the work. The owner reads it to see which contractors repeat and which ones only ask for a price.
Reason lost or on hold
The office picks it from a short list, such as price, timing or chose another fabricator. It turns lost jobs into a record you can learn from.

Who it is for

This is written for these aluminium fabrication contractors.

  • Sliding and casement window and door fabricators
  • Office partition and glass cabin fabricators
  • Shopfront and showroom aluminium work contractors
  • ACP cladding and elevation fabricators
  • Aluminium railing, grill and balcony enclosure makers
  • False ceiling grid and aluminium panel fitters
  • Home-based and workshop-based fabricators serving individual homeowners
  • Fabricators who work only as sub-contractors for interior firms

Before you decide

When this may not be the right fit.

  • Your office staff do not enter anything today, and a tool would remain empty until someone owns the habit
  • You handle a few jobs a month and a notebook kept by one person is enough for now
  • Measurements are on paper slips that nobody scans, so the record would hold only the names

Before you decide

Agree the work. Know how to judge it.

CRM for aluminium fabricators: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium fabrication contractors. Anything missing is noted in the written scope, with who will supply it.

Open quotes in whatever form they sit
Quotes on paper, in sheets, in the estimator's phone or in email. We take them as they are. Without them the record starts empty, and the first thing the office sees is a blank tool beside a pile of papers. If a quote exists only in a message, take a screenshot. We read what is there and ask about anything unclear.
Measurement slips and site photographs
The slips and pictures kept for recent sites, gathered into a folder. Photographs of paper slips are acceptable. Without them, we cannot show how to attach a measurement to a job, and slips continue to go missing. Gather them at the workshop into one folder, even if the names are mixed. We sort them with the office during the loading step.
A contractor and dealer contact list
The names, roles and phone numbers of contractors and dealers who send or may send work, with notes on the sites they gave. A phone contact list is fine. Without it, the record cannot show who the repeat sources are. Mark the ones who gave repeat work, since the record will use that to show your best sources.
Office staff time for a trial
The people who will enter data must try the record on live jobs. A short sitting is enough. If they do not, the first live week finds the faults, with enquiries waiting for a reply. Choose a quiet part of the week and keep it practical, with live jobs on the screen and not a demonstration. Two short sittings are better than one long one.
A decision on who owns the record
Name one person who keeps the record in order, with a deputy. It can be the estimator or the office manager. Without an owner, entries lapse within weeks and the record quietly stops being true. Tell us who covers when that person is away. A record with no owner is soon wrong, and nobody trusts it. Set the owner before we start.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Follow one job from enquiry to handover

    We follow a real job through your office: the enquiry, the measurement visit, the quote, the order, the fitting and the handover. We note each paper, phone call and photograph on the way. You tell us where information gets lost, and that path decides the stages of the record. We mark where an estimator's paper note is the only copy of a site.

  2. 2

    Choose the sheet or tool

    We compare a shared sheet and a simple CRM against how your office works and who will use it. We say which fits and what each costs in time and effort. You decide, and we note who owns the set-up after we leave. We cost the set-up in time for the office and not in money, so you decide with the whole picture in front of you.

  3. 3

    Design the stages and the fields

    We draw the stages that match your work: enquiry, visit booked, measured, quoted, ordered, fitted, repair call. We add fields for the site, the work, the buyer type, the source and the next step. You strike anything the office would not fill in. Fields for source and buyer type are kept, since later reviews of the record depend on them heavily.

  4. 4

    Load open quotes and contact records

    We enter open quotes, contractors and dealers into the record, with the office staff doing the entry beside us. Photographs and measurement slips are attached to the right job. We clean duplicates with you, because a wrong merge is hard to undo. Where a contractor appears under two names, we ask the office which is right before we join the entries.

  5. 5

    Run one live job through the office

    The office takes a new enquiry and runs it through every stage while we watch. We note where the form is clumsy, where a field is skipped and where the estimator's paper note still lives. We change the structure before the record is used for all jobs. The estimator's habits matter here, so we adjust the form to what they will actually write at a site.

  6. 6

    Read stalled quotes and repeat names

    After a period of use we read the record for quotes that stopped moving, contractors who returned and repair calls in need of a visit. You decide which fields to add or remove. Nothing here promises more orders, only a clearer record. We read the repair history of one site to show how the next visit is helped by the record of the last.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Is a spreadsheet enough?
For a small workshop, a well-set shared sheet is enough to start. Move to a CRM when more than one person updates it and rows get missed.
Who should own the record?
One person in the office, even if the fitters send the details. Shared ownership leaves the record empty.
Can it connect to WhatsApp?
Some tools do, and some need a manual note. We suggest the simplest option that your team keeps up. Check the tool's current terms before you connect.
Where do measurements and site photographs go?
Attach them to the enquiry, not to a phone. Ask the estimator to upload them the same day, with the opening names written as the drawing uses them. When the fitter arrives, the right file is open.
How do repair calls appear in the record?
They sit in their own stage list, with a field for the original job if you know it. Repair history is the part firms rarely keep, so each visit is noted against the site and the frame. When the same site calls again, the office sees what was done last time and can send the right fitter with the right parts. This also lets the estimator see at once whether a frame was fitted by your crew or by someone else. Tell us if you do not repair others' work.
What if the estimator keeps notes on paper?
Then the paper note is photographed and attached to the job by the office, and the key facts are typed into the fields. We do not force the estimator to change at the site. Over time, the estimator may dictate a voice note instead. The record works as long as someone in the office fills it from the paper the same day. The paper stays on file as the original, and the typed fields are the working copy the whole office can search.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.