Skip to content
GullySales

Aluminium fabrication contractors · Lead generation

Fill the measurement-visit diary with sites that are ready to order.

Lead generation for an aluminium fabrication contractor means getting a measurement visit booked at a site where glass, hardware or a shop unit is already planned. GullySales works on the sources that send those sites to you and on a record that shows which source sent which one.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Fabricators inspect laser-cut panels and bent metal enclosures

What lead generation means

Lead generation is the combined work of every channel that brings in a new enquiry, whether from search, adverts, referrals or a stall at an exhibition. GullySales runs these channels together and reports the number of enquiries each one produced, not the activity behind it.

Plan the next part of the work

Last updated 21 Nov 2026.

For aluminium fabrication contractors

Where it usually goes wrong, and what we would do.

  • “A cold enquiry is not a ready site”

    A homeowner asking the rate of a sliding window may not have a flat handed over yet. A site engineer asking for a partition fitter has a drawing and a date. The two need different replies, and mixing them wastes a crew's trip.

  • “Contractors and dealers send the larger jobs”

    Floors of partitions and cladding reach a fabricator through interior firms, builders and section dealers. Those people do not search; they remember a name. The job is to be the name a short list of people remember.

  • “The source is forgotten by the next day”

    An enquiry arrives on a call, the fitter notes a site address on paper, and nobody writes down who recommended you. Months later you cannot say whether dealers or Google Maps pay for themselves.

  • “Repair calls look like leads but behave differently”

    A broken track needs a visit this week and pays a small amount. A new floor needs a quote and pays a large one. Counting both as leads hides which kind your effort is bringing in.

What we do

What we deliver for aluminium fabrication contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A source list for your city

    Interior firms, builders, section dealers, glass shops and fit-out managers named firm by firm, with the type of work each one hands out.

    Result: You hold a written list of who to approach and for which work.

  2. An enquiry sheet with a source column

    Every call, WhatsApp and walk-in is entered with site type, area, source and the person who took it.

    Result: Each enquiry has a recorded origin you can count later.

  3. Separate routes for new work and repair

    Two ways to ask, with different questions, so a jammed window and a full floor do not queue together.

    Result: Repair calls and new-work enquiries reach different people.

  4. A measurement-visit request page

    A short page asking for site address, type of work, drawings if any and a good time to visit.

    Result: A buyer can ask for a visit without a long phone call.

  5. A review of which sources paid

    Enquiries set against quotes sent and orders won, source by source.

    Result: You can see which source is worth another visit and which is not.

How the result is measured

  • Relevant enquiries by source
  • Duplicate and unsuitable enquiries
  • Time to the first response
  • Accepted enquiries reaching an agreed next step

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Record these at the first call so a measurement visit is worth the trip.

Type of work and opening count
Sliding windows, partition, shopfront or railing, and how many openings. The estimator uses it to judge whether the visit is a small repair or a full measurement.
Site stage
Bare shell, plastered, tiled or occupied. It tells you whether frames can be fixed now, and whether the civil work is finished enough to measure.
Who is the buyer
Owner, interior contractor, site engineer or dealer. The person who answers the phone is not always the person who approves the quote, so note both.
Glass, finish and colour asked for
Anodised, powder-coated or wood-finish, plain or toughened glass. A quote cannot be compared unless these are written down at the first call.
Who sent the enquiry
A contractor, a dealer, a shop sign on a finished site or a map search. It is the source column that shows where the larger jobs come from.

Who it is for

This is written for these aluminium fabrication contractors.

  • Sliding and casement window and door fabricators
  • Office partition and glass cabin fabricators
  • Shopfront and showroom aluminium work contractors
  • ACP cladding and elevation fabricators
  • Aluminium railing, grill and balcony enclosure makers
  • False ceiling grid and aluminium panel fitters
  • Home-based and workshop-based fabricators serving individual homeowners
  • Fabricators who work only as sub-contractors for interior firms

Before you decide

When this may not be the right fit.

  • You have no one to take the call when the crew is on site, so more enquiries would only reach an unanswered phone
  • Your workshop is full of orders already, and a new source would only lengthen the wait for buyers you must disappoint
  • You cannot travel beyond your current area, and enquiries from outside it would be turned away

Before you decide

Agree the work. Know how to judge it.

Lead generation for aluminium fabricators: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Define the organisations or buyers you can serve and the reasons they would consider a conversation. Bring examples of accepted and rejected prospects so the selection rule is visible.

Make the scope clear

Agree the research sources, contact approach, qualification rules, and handover. Clarify which meetings count as accepted and what happens to replies that are not ready to buy.

Check the work in use

Review why a prospect was selected and what was learned from the response. Count held, relevant conversations separately from contacts found, messages sent, or meetings booked.

Know when to change course

If the same objection appears repeatedly, adjust the offer or buyer group before increasing outreach. Respect a request to stop contact and keep the exclusion in the record.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from aluminium fabrication contractors. Anything missing is noted in the written scope, with who will supply it.

Last year's measurement-visit register
The book, sheet or phone notes where visits are recorded, in whatever state they are in. Gaps are acceptable and we mark them. Without it we cannot see which sources sent real sites, and the baseline sheet starts empty, so later work has nothing to be compared with.
Names of contractors and dealers who send work
A short list of the interior contractors, builders' offices and section dealers that have given you sites, with the person you know at each. A scribbled list is enough. Without it we cannot plan visits, and the work leans on the listing and the phone number alone.
The areas your crews can reach
A plain statement of the localities, roads and building types your crews will go to, and the ones they will not. Only you can say. When it is missing, enquiries come from places you cannot serve, and the estimator loses time on visits that never lead to an order.
A phone that is answered on site
A named person who picks up the enquiry number while the crew is out, even if only a few times in the day. A shared phone is acceptable. Without one, calls go unanswered during site hours, and the buyer rings the next fabricator on the list.
Your rule on repair calls
Whether the firm takes repair work, on which kinds of frame and in which areas. A yes or no with a few conditions is enough. If it is open, repair calls are mixed with new sites, and the crew is sent to jobs that were never planned.

How it works

How the lead generation work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Mark the crews and sites you can staff

    We sit with you and the estimator and list how many fitting crews you have, which areas they can reach and which kinds of work they can take on at once. You decide which sites you will refuse, so that new enquiries never outrun the crews you can actually send.

  2. 2

    Sort last year's visits by source

    We open the visit register and the quote file and mark where each site came from: a contractor, a dealer, a neighbour's word, a listing or a board. The source column becomes the baseline sheet, and you correct any entry that you remember differently from the file.

  3. 3

    Write the site-ready questions

    We draft the short list of questions an enquirer answers before a visit is booked: where the site is, what is to be fitted, whether glass and hardware are chosen, and who holds the keys. You cut or add questions until the list fits a phone call.

  4. 4

    Call the numbers as a stranger would

    We ring the listed numbers and send a test message as a buyer with a site to fit. We note who answers, what is asked and where the details are written, and whether a repair call is separated from new work. Faults in the handoff are corrected first.

  5. 5

    Brief contractors and dealers in person

    You and the estimator meet the interior contractors and section dealers who already send work. We prepare a one-page sheet for each visit, listing what you fit, how a visit is booked and how a contractor's site is treated.

  6. 6

    Match paid jobs back to their source

    After launch we compare the source column on each new job with the baseline from last year. You see which source sent sites that went on to be ordered and which sent only questions, then decide where the next visit or call goes. No count of enquiries is promised.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should I buy leads from a listing site?
Treat them as one source among others and tag them. A shared enquiry goes to several fabricators at once, so record which ones you actually won. The sheet shows whether the cost was worth it.
How do I get more floors from interior contractors?
Be the name they can pass on. A finished site to visit, a crew list and a clear quote format give a contractor something to say to a client. GullySales prepares those and the list; whether a firm gives you a floor is its decision.
Do you promise a number of enquiries?
No. We set up the sources and the record, and you see what each one brings. We cannot promise enquiries or orders.
Can a fabricator ask for a site photograph before the visit?
Yes, and it saves a wasted trip. A photograph of the opening or the wall shows the condition and the access. Ask politely on WhatsApp, explain that it helps you plan the measurement, and still visit before quoting a final figure.
What should the source column contain?
One short word per enquiry, such as contractor, dealer, listing, board or neighbour, plus the name when the source is a person. It is written when the call is taken, not afterwards, because the source is forgotten by the next day. We add the column to your enquiry sheet and show the person who answers the phone how to fill it in. The person answering the phone writes it, since they hear the source first. Without that, the column fills with blanks quite soon.
Who calls the enquirer back when the crew is on a site?
A named person in the office or the estimator calls back, using the reply we write with you. The reply thanks the enquirer, asks the few site questions and offers a visit slot you have chosen. If nobody can call, the enquiry goes into a list that is cleared when the crew returns, and the buyer is told that a callback is coming. Tell the enquirer the callback is coming and why, so they do not ring the next fabricator on the list in the meantime. A courteous holding reply costs nothing.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.