Skip to content
GullySales

Building information modelling consultants · CRM

Keep every tender, scope and proposal on one record you can read in a minute.

A CRM for a BIM consultancy is the shared record of each contractor, consultant and developer, the tender they are bidding for, the scope you proposed and the stage of the decision. GullySales sets up the fields and rules, so the tender close date and the person who will give the outcome are never left in someone's inbox.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of architecture firms at work in India

What CRM means

A CRM is the record where every enquiry, call and quote is kept against a customer, replacing separate notebooks, spreadsheets and memory. GullySales sets up or cleans an existing CRM and reports from it by enquiry outcome rather than by activity logged.

Last updated 14 Nov 2026.

For building information modelling consultants

Where it usually goes wrong, and what we would do.

  • “A tender has dates that an ordinary contact list ignores”

    The close date, the evaluation stage and the person who will tell you the result decide when to call. A CRM built for generic sales leaves those in notes, where nobody sees them in time.

  • “The same contractor appears on several bids”

    One firm may bid on several tenders and ask for a different scope on each. A record per company, with a record per tender beneath it, keeps the history straight when a new clause arrives.

  • “Rescue jobs and planned jobs need separate marks”

    A model started badly by another team has different fees and a different outcome. Marking the type on each record shows how much work comes from planned projects and how much from repair.

  • “Freelancers and partners are part of the picture”

    Associate modellers, scanning vendors and architects who refer work all touch a project. Recording who brought or supported a job shows where relationships actually come from.

What we do

What we deliver for building information modelling consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A company and tender structure

    Companies, contacts and tenders arranged so each bid sits under the firm and its people.

    Result: One search shows every bid for a contractor.

  2. Fields for BIM scope

    Scope sold, building type, disciplines, software and level of development as the buyer stated them.

    Result: You can compare proposals of the same type.

  3. A tender calendar view

    Close dates, evaluation stages and the named person for the result, in one list.

    Result: Each call to ask the outcome is made on time with a name.

  4. Source and type marks

    Source of each enquiry, and a mark for planned or rescue.

    Result: You can see which sources bring planned projects.

  5. Simple handover from sales to delivery

    A summary sheet generated from the record when a contract is won.

    Result: The delivery team starts with what was promised.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

Fields worth keeping

A BIM record needs the clause, the scope and the evaluation stage.

Tender close and result date
The estimator fills it from the tender document. It sets the day a call is useful and the day it is not.
BIM scope sold
Modelling, coordination, scan-to-BIM, 4D or 5D, as the buyer stated. The estimator fills it so proposals of one type can be compared.
Disciplines and building type
Architecture, structure, MEP and the building class. Filled at the first call, it shows which projects you win most.
Software and level required
The tools and level of development the client names. The modelling lead fills it before the proposal is priced.
Rescue or planned job
A single mark entered at the first call. It separates fee notes and reminds you to ask for an earlier role next time.
Who evaluates and who tells us
The named person for each. The business head fills it, so the follow-up goes to the right desk.

Who it is for

This is written for these building information modelling consultants.

  • Modelling and coordination firms working for contractors
  • Consultants appointed by developers and project managers
  • Scan-to-BIM and as-built modelling specialists
  • Revit modelling teams serving architects and MEP firms
  • Structural BIM detailing and rebar modelling teams
  • 4D and 5D BIM planning and quantity specialists
  • Facility management and digital twin consultants
  • Freelance modellers growing into firms

Before you decide

When this may not be the right fit.

  • Tenders and enquiries are tracked in a shared spreadsheet that everyone already updates, and a CRM would only add a second place to enter the same facts.
  • No one owns record keeping, so the fields would be filled for a month and then abandoned.
  • You want the CRM to hold models and drawings, which belong in your project storage.

Before you decide

Agree the work. Know how to judge it.

CRM for BIM consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from building information modelling consultants. Anything missing is noted in the written scope, with who will supply it.

The tender and proposal files you hold
The record starts with what you have. Bring the list of current and recent tenders, proposals and clients, wherever they are kept. We merge them once, and where information is missing, we mark it unknown instead of inventing it.
Close and decision dates for live bids
A calendar is only useful if dates are right. Bring the close date, clarification date and decision date for each bid in progress. Where a date is unknown, the owner of the bid asks the client and enters the answer. If a client never confirmed the date, the owner of the bid writes that in the record.
A list of freelancers and partners
Freelance modellers and partner firms are part of how work gets done. Bring their names, what they do and whom they work with. Without this, the record holds only buyers, and capacity questions are answered from memory.
Decisions on who may see what
Proposals hold prices and client names. Decide which roles may see fees and which may only see status. If left undecided, we hide fees at the start, which makes proposal review slower. Tell us also whether partners and freelancers should see any client information at all.
Time for a trial with two users
The test needs two people to work with the record for an afternoon. Fix the day with your director and protect it from client calls. If the team is split across sites, we run the trial remotely.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one tender from notice to appointment

    We trace one past tender through your records, from the first notice through the proposal, the clarifications and the decision, and note who handled it, where each document lives and where dates were missed. You mark the steps that must never be skipped. The record we design follows this path. We also note the emails and calls that carried the key decisions, so that the record can hold them.

  2. 2

    Decide the company and tender structure

    Contractors, consultants and developers appear on several tenders at once, so we agree how a company, its people and each tender are linked in the record. Your director decides which facts must always be filled: client, scope, tender close date, decision date and contact. Fewer required fields means more get filled.

  3. 3

    Add the BIM scope fields and marks

    We add the fields that matter to modelling work, such as software, level of detail, building type and whether the job is planned or a rescue. We also mark each enquiry by source and by type of buyer. Your lead modeller checks that these fields mean something to the people who deliver.

  4. 4

    Load live tenders and test with your team

    We enter your current tenders and clients into a test version and ask two people to use it for an afternoon instead of their spreadsheets. They tell us what slows them. We change the screens until a clarification or a revised date can be logged without leaving the email. The test also shows which fields people leave empty, and those are removed or made optional.

  5. 5

    Set the tender calendar and the alerts

    We build the calendar view of close dates and decision dates, and the reminders that go to the owner of each tender. Your director approves the rules, including who is told when a close date is within reach. A tender with no owner is shown in red.

  6. 6

    Hand over, with the sales to delivery note

    When the team has used the record, we move the remaining data from the old sheets and archive them. You name the administrator and who may export. We also set up the short note that passes a won job from sales to the delivery team, so that scope promises are not lost.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Which CRM tool should we use?
One your team will open daily. Choices in India include Zoho CRM and HubSpot, and a well-kept spreadsheet is a fair start. We set up whichever you pick.
Do we need to move old records?
Move the live tenders and the clients you expect to hear from again. Older records can stay archived and be imported only if a pattern needs them.
What about confidential tender details in the CRM?
Restrict access to those who work on the bid and keep client documents in your project store, not in notes. The reason is that tender terms carry confidentiality duties. Check the access settings of the tool you choose.
Should rescue jobs sit in the same pipeline?
Yes, with a mark. The reason is that they follow the same enquiry and proposal steps but different fee logic, and a mark lets you see how many arrive and which led to an earlier role on the next project.
Should past clients be in the same record as new tenders?
Yes, in the same record but marked differently. A past client who is bidding again is your warmest lead, and your team should see the earlier jobs, the contacts and the lessons from the last project before writing the next proposal. We separate current tenders from history through a simple stage mark. A contractor who appears on several tenders is shown once, with each tender listed under it.
How do we stop the record becoming a second job?
By keeping it short and by making it the place where tender work is already done. The required fields are few, and the proposal, the clarification mails and the dates are filed there as part of the work. We cut any field the team does not use after the trial. Your director reads the tender calendar in meetings, which gives the team a reason to keep it right.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.