Skip to content
GullySales

Building information modelling consultants · Follow up systems

Chase the tender result with a name and a date instead of a hunch.

A follow-up system for a BIM consultancy is the set of rules that decides who contacts a bidder after a proposal, with what message and on what trigger. GullySales builds the rules around the tender close date and evaluation stage, so the call is made when the answer is likely to exist.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Realistic editorial illustration of architecture firms at work in India

What follow up systems means

A follow-up system is the set routine for calling, messaging or emailing an enquiry more than once, since most buyers do not decide on the first conversation. GullySales sets the number and timing of follow-ups so an undecided buyer keeps hearing from you until they decide either way.

Last updated 14 Nov 2026.

For building information modelling consultants

Where it usually goes wrong, and what we would do.

  • “Silence during evaluation says nothing”

    A contractor under evaluation cannot answer you, and a call made too soon only irritates. The record should say when evaluation ends and who owns the decision, so you call on the right day.

  • “The tender may be won by the contractor, then awarded to you”

    Your proposal sits inside their bid. Two outcomes follow, and you need to be told of both. A follow-up after the contractor's result, not only after your own submission, keeps the thread alive.

  • “A lost proposal still deserves one call”

    A contractor that chose a cheaper modeller may return when the model fails. A courteous call asking what decided it, and leaving the scope guide behind, keeps you in view for that moment.

  • “Architect practices go quiet after the peak”

    A small practice that borrowed your modellers will forget you when the submission passes. A short note with the sample file exchange sheet keeps your name on file for the next stretch.

What we do

What we deliver for building information modelling consultants.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A follow-up plan per proposal stage

    What happens after the proposal is sent, after the tender closes, after the result and after a loss.

    Result: Every proposal has a next step with an owner.

  2. Message drafts for each stage

    Short notes and call scripts in plain words, ready for you to adjust.

    Result: Nobody writes a chase from scratch.

  3. A due list from the tender calendar

    Daily list of calls due, built from close dates and the named contact.

    Result: Your team opens one list and works through it.

  4. Loss review note

    A short form asking what decided the outcome, filed in the record.

    Result: Losses add to what you know about buyers.

  5. Reminder to re-contact

    A note on past bidders to contact when a new tender with a BIM clause appears.

    Result: Earlier contractors hear from you when it matters.

How the result is measured

  • Follow-up completion rate
  • Average number of follow-ups before close
  • Enquiries closed after repeat follow-up

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to capture or send

Each stage of a BIM proposal has a message and a record entry.

Proposal sent
Record the date, scope and named reader. Send a short note naming the one question the buyer is likely to raise first.
Evaluation under way
Record the expected result date and who tells you. Make no call until that date, since the bidder cannot answer.
Contractor result known
If your proposal sits inside their bid, ask the result of their bid first. Your award depends on theirs.
Clarification asked by the buyer
Log the question, the person and the reply date. Answer in writing so the proposal file stays complete.
Proposal lost
Record the stated reason in the buyer's words. One courteous call afterwards shows what to change in the next scope.
Handover model delivered
Record the date and the reader. A short check that the facility team can open the files keeps the relationship alive.

Who it is for

This is written for these building information modelling consultants.

  • Modelling and coordination firms working for contractors
  • Consultants appointed by developers and project managers
  • Scan-to-BIM and as-built modelling specialists
  • Revit modelling teams serving architects and MEP firms
  • Structural BIM detailing and rebar modelling teams
  • 4D and 5D BIM planning and quantity specialists
  • Facility management and digital twin consultants
  • Freelance modellers growing into firms

Before you decide

When this may not be the right fit.

  • Proposals are sent without a named reader at the buyer, so a follow-up would reach no one.
  • No one can read a tender calendar, so reminders would be set on guesses and land during evaluation.
  • You want automatic chasers to site teams, who answer a person who knows their tender.

Before you decide

Agree the work. Know how to judge it.

Follow-up systems for BIM consultants: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Trace recent enquiries from arrival to the last recorded action. Include a won enquiry, an unsuitable one, and one that went quiet, with personal details removed for the initial discussion.

Make the scope clear

Agree who accepts each enquiry, what makes it qualified, and how ownership changes. Include a rule for missed replies and a clear reason for closing an enquiry.

Check the work in use

Pick an enquiry at random and ask the team to find its owner, latest conversation, and next action. Check that the record agrees with what actually happened.

Know when to change course

If no one has capacity to respond, assign that responsibility before buying more leads. Automation can support the owner, but it cannot replace an unresolved handover.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from building information modelling consultants. Anything missing is noted in the written scope, with who will supply it.

Every proposal sent in the last year
The system starts from what is undecided now. Bring the proposals with date, client and scope, won, lost or open. Where status is unknown, the owner of the proposal asks the client, and that call is itself the first follow-up. A proposal that lists several scopes is entered once with each scope noted.
Evaluation dates from the client
A contact timed to the client's evaluation is welcome, one that ignores it is not. Bring any dates the client gave for close, clarification or award. Where unknown, we write the first message to ask. If the client is a public body, bring its published evaluation steps.
A named owner for every proposal
Each proposal needs one person who follows it up. Assign owners, and tell us who covers during leave. Proposals without an owner are listed for the director to hand out. Tell us also who decides when a proposal is withdrawn because the studio is full.
The reasons clients gave for choosing others
Lost proposals hold the best lessons. Bring any feedback you have, from a call or an email. If none was given, we add a question to the loss message and begin recording the replies. A single line from the client is enough, and a call note counts.
Agreement on what may be said about a rival
A follow-up that criticises another firm harms yours. Decide the tone of messages after a loss and what you will never write. We follow that rule in every draft.

How it works

How the follow up systems work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    List open proposals and where each stands

    We open your proposal file and list every proposal still undecided, with the client, the scope, the date sent and the stage of evaluation. You tell us which are still live. That count is kept as the starting point, and the dead ones are cleared with a single message to each client. Proposals whose clients have not answered in a long while are listed apart from those still under evaluation.

  2. 2

    Map the tender stages to the triggers

    Together we write the stages a proposal passes through, such as submitted, clarification, shortlisted, negotiation and awarded, and the event that moves it from one stage to the next. Each stage gets a rule about who contacts the client and what they say. Silence during evaluation is not treated as a no. Stages differ for a contractor bidding to a client and for a developer choosing a consultant, so each type gets its own line.

  3. 3

    Write the message for each stage

    We draft a short message for each stage: a polite check that the proposal reached the right reader, an offer to answer clarifications, a note after shortlisting and a thank-you after a decision. Your director edits them into their own voice, since a client can tell a template at once. We also write the plain question to ask when a client goes quiet after a clarification.

  4. 4

    Build the due list from the tender calendar

    We create a list that shows, from the close and decision dates, which proposals are due for a contact and who owns each. We test it on live proposals for a short while and adjust the rules where it fires too soon or too late. The list also marks proposals that need a sample file or a reference before the next contact.

  5. 5

    Add the loss review and re-contact note

    For every lost proposal, a short note records the reason the client gave, the winning firm if known and the next date to speak. Your director reads these notes together. A lost client is placed on the re-contact list with a reason to call again. The note is kept short enough for a director to complete after a telephone call.

  6. 6

    Read results and change the rules

    After the team has followed the plan, we compare the proposals answered, the clarifications received and the awards with the starting list. We sit with your director to change any stage rule that did not work. The reasons given for lost proposals are read together.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 2, qualification. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

How often should we follow up?
When the record says a contact is due. The close date and evaluation stage the buyer gave you set the next call, not a fixed rhythm.
What if the contractor never replies?
Log the attempts, ask once more through a different person if one is known, then close the record with a reason so the list stays clean.
What if the contractor never reveals the evaluation outcome?
Send one courteous note that offers to answer queries, then record the silence and move on. The reason is that a bidder under evaluation may be barred from discussing it, so more calls add pressure without information.
Can we follow up after delivery to ask for the next project?
Yes, after the handover model has been opened and checked. The reason is that the buyer has by then seen the value of coordination. Ask what the next project is and when the BIM clause will be written.
How soon should we contact a client after submitting a proposal?
The right moment depends on the client's own process and not on a fixed gap. We write the first message to check that the proposal reached the person who reads it and to ask when clarifications will be taken, and we set later contacts from the dates the client gives. If the client gives none, the due list holds the proposal for a gentle check at a point your director sets. We never promise a result from any contact.
Is it worth contacting a client who chose another firm?
Yes, once, and politely. A short message that thanks the client, asks for any feedback and leaves a way to stay in touch costs little. Buyers who chose another firm sometimes return when a project changes or a consultant falls short. We record the reason given, place the client on the re-contact list and do not chase the same tender again.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.
What if we are not happy with the work?
Tell us and the plan changes. Everything is reported against the baseline, so a number that is not moving is visible to both sides. The term is in your written scope, and the refund and cancellation policy sets out the rest.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.