Skip to content
GullySales

Commercial real estate developers and brokers · CRM

Keep every requirement, introduction and lock-in date in one record the company owns.

A CRM for commercial real estate is the record of every requirement and every tenant. It holds the area needed, move date, introducing broker, tours, test fits and term sheet stage, then the lock-in and escalation dates once signed. GullySales sets up those fields and the introduction rule, so the record outlasts any one leasing manager.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A broker shows a business owner a commercial office space

Last updated 14 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For commercial real estate developers and brokers

Where it usually goes wrong, and what we would do.

  • “A requirement lives for months”

    Between the first call and a signed lease come tours, test fits, a board approval and legal review. Notes on one manager's phone do not last that long.

  • “The lease is the start of the next sale”

    Lock-in end, escalation date and renewal notice are sales dates. A CRM that stops at signing leaves the renewal to chance.

  • “One company, several requirements”

    A corporate occupier may want an office in one city and a warehouse in another. Record the company once with the requirements under it, or two of your people ring the same CFO.

What we do

What we deliver for commercial real estate developers and brokers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A requirement record with commercial fields

    Area or seats, space type, budget on a rent basis, move date, current lease end, fit-out need and decision makers, held centrally.

    Result: Any manager can pick up a requirement halfway through.

  2. Introductions logged as they arrive

    Broker, company, date and time of the first introduction, with the validity your rule sets shown beside it.

    Result: Commission questions are answered from the record.

  3. Tours and test fits as events

    Which floors were shown, who attended, what the occupier asked for, and the test-fit layout sent afterwards.

    Result: The next call picks up where the tour stopped.

  4. Stages that match a commercial deal

    Requirement, tour, test fit, proposal, term sheet or LOI, legal review, lease signed and fit-out, with a reason needed before anything is closed as lost.

    Result: The pipeline reads the way leases are signed.

  5. Tenant dates after signing

    Lock-in end, escalation, renewal notice and lease expiry for each tenant, with a named owner for each renewal conversation.

    Result: Renewals start from the record, not from a notice letter.

  6. Stacking plan beside the pipeline

    Which floors and units are free, held under a term sheet or let, visible next to each requirement.

    Result: Nobody offers a floor that went under LOI last week.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to record, and when

What a commercial leasing team should record about each requirement and tenant, and whether software is needed yet.

First introduction, with date and time
Record who brought the requirement, the company named and the exact time. Introductions decide commission, and memory loses that argument.
Area, move date and current lease end
Write all three at the first call. A company whose lease ends well after your floor is free is a requirement to plan for, not one to chase this week.
Who signs on the occupier's side
Name the admin head, the CFO, the founder or the board, and note which of them has toured. A deal stalls at whoever has not seen the floor.
Term sheet points still open
List lock-in, escalation, rent-free fit-out period, deposit and car parks as agreed or open. Legal review moves faster when the open points are written down.
Tenant dates once the lease is signed
Enter lock-in end, escalation and renewal notice for each tenant. Keeping a tenant costs less than finding a new one, and the renewal starts from these dates.
Do you need software yet?
One broker with a few live requirements can work from a sheet. A landlord with several buildings, brokers and tenants needs a shared CRM, because introductions and lease dates cannot sit in one person's file.

Who it is for

This is written for these commercial real estate developers and brokers.

  • Office and IT park developers
  • Retail, high street and showroom space owners
  • Warehousing and logistics park developers
  • Industrial shed and land owners near state industrial estates
  • Commercial brokers and tenant representation firms
  • Managed office and coworking operators
  • Sellers of pre-leased shops and offices
  • Owners of single commercial buildings leasing floor by floor

Before you decide

When this may not be the right fit.

  • You lease a few floors and a shared sheet already holds every requirement, so a CRM would add work without clarity.
  • Brokers' contacts sit on personal phones that the team will not share, which must be settled before any tool is bought.
  • Nobody will enter a tour or an introduction on the day, so the record would trail the real position.

Before you decide

Agree the work. Know how to judge it.

CRM for commercial real estate developers and brokers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial real estate developers and brokers. Anything missing is noted in the written scope, with who will supply it.

The stacking plan for every building
A sheet showing each floor, its area, its current tenant or status and the lease end date. The tracker links requirements to floors using this plan. If it exists only as a drawing, we transcribe it with you, and the first load takes longer. Mark the floors that are under offer and the date the offer lapses, since a requirement may be linked to a floor that is not yet free.
Requirements held on WhatsApp and in notebooks
Gather the live requirements that leasing managers keep in chats and notebooks, even as photographs. These are loaded first so the tracker is useful from day one. If managers keep them private, the tracker starts empty and the team may return to chat. Photographs of notebook pages are acceptable, and we type them in with the manager beside us to correct any entry as we go along. This saves us guessing at later stages.
A rule on broker registration and commission
Decide how the firm treats a requirement that arrives through two brokers, and who may register one. The tracker records the first introduction, but the rule is a commercial decision for the owner and the firm's adviser. Without it, disputes are logged and left open. Write the rule even if it is rough, since an adviser can refine a draft far faster than a blank page, and the tracker then follows it.
Lease summaries for signed tenants
A one-page summary for each tenant: start date, lock-in, escalation, renewal option and fit-out period. These dates drive follow-up after signing and tell you when a tenant may need more space. Without them, the tenant records carry no dates and the reminders stay empty. Include any option to renew or expand and the notice period required, as written, because the tracker prompts a call before that date. The dates also tell leasing which tenants to call first.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one lease from first call to handover

    We take a signed lease and follow it backwards through the leasing desk's notes: the first enquiry, the broker introductions, the tours, the test fits and the term sheets. You correct us where we misread. The stages of the tracker come from that real path, not from a template. Where the real path differs from the one the team describes, we keep the real one and note the gap for discussion.

  2. 2

    Design the requirement record with commercial fields

    We agree the facts a record must carry: area, floors, headcount, move date, current lease end, decision-maker, introducing broker and building considered. You cut the list until every field is one the leasing team will fill. Fields that only a manager reads move to a separate sheet. Each field gets a short note saying why it is there and who reads it, so nobody wonders about an empty box.

  3. 3

    Load the stacking plan and live requirements

    We enter each building's floors with area and status, then load the open requirements and link them to the floors they are considering. You check a sample against what you know. After this step the tracker shows which requirements compete for the same floor. Requirements that point at the same floor are shown together, so the desk sees competition before it promises the floor to anyone.

  4. 4

    Connect forms, calls and the broker inbox

    We link the website form, the leasing number's missed-call alerts and the inbox where brokers send requirements, so each arrives as a record with its source. You send test enquiries and watch them land. Rules that move a record between stages are tested at the same time. A form that arrives without an area or a move date is flagged for the desk to complete by phone.

  5. 5

    Hand over to leasing, then read the outcomes

    On the day the team starts, we stay on hand to fix what they find. Later we read the outcome fields against the record taken before the work began: requirements, tours, term sheets and signed leases. You decide which stage definitions to change after seeing the pattern. Stages that nobody uses are merged, and a stage where records pile up is examined with the team before any rule is touched.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Our leasing team works on WhatsApp. How does that get into the CRM?
Use a business WhatsApp number the company owns, and log the requirement, the floor plate sent and the reply in the record after each exchange. Brokers keep messaging as they do now. The introduction time must be copied in, not left in a chat.
Our managers do not update the record. What works?
Make the record the only place a tour can be booked and a term sheet raised from. Then pay incentives on what the record shows. A rule without that link is ignored soon after it is announced.
Who owns the data if brokers register requirements in our CRM?
You do, as the landlord. Give brokers a form to register requirements, with no access to other brokers' introductions or your tenant list. Write the arrangement into the broker agreement.
Can one CRM hold both leasing and the sale of units?
Yes, with separate stages. A lease runs through tour, test fit, term sheet and lease deed; a sale runs through tour, offer, agreement and registration. Keep two pipelines on one company record, so an occupier who later buys is recognised.
Can the CRM show which broker introduced a requirement first?
Yes, if every introduction is logged with its date at the moment it arrives. The tracker keeps the order, so the first introducer is visible. What the firm then does about commission is a commercial and legal decision that belongs to the owner and an adviser, not to the software. We set the field and the history, and leave the rule to you. The first introducer is visible on the record, but the commercial rule for commission remains with the owner and an adviser. Disputes are logged with dates, which makes later conversations calmer, and we never settle them inside the software. This keeps the history accurate for everyone.
What should we do with requirements that have gone cold?
Keep them, mark them as dormant with a reason, and review them when a floor falls vacant. A company that stopped talking in the spring may have a new need after a funding round or a lease end. We add a dormant stage and a reason field, so a cold record is searchable instead of buried in a notebook. Dormant records are reviewed whenever a floor of a matching size falls vacant, so the desk calls those companies first. A reason for the pause, such as board approval pending or lease running on, makes the call more specific and more welcome. Nothing is deleted, so history stays complete.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.