Skip to content
GullySales

Commercial real estate developers and brokers · Sales process

Write down every step from a broker's requirement to a registered lease deed.

A sales process for commercial real estate is the fixed set of steps between a requirement and a signed lease or sale deed. It covers the qualifying call, the tour, the test fit, the term sheet, legal review and the fit-out handover. GullySales writes those steps down with what to ask and record at each.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A broker shows a business owner a commercial office space

Plan the next part of the work

Last updated 21 Nov 2026. Rules for this trade differ by state and professional body, and they change. We describe restrictions in general terms, so check the current position with your own council or adviser before you publish anything.

For commercial real estate developers and brokers

Where it usually goes wrong, and what we would do.

  • “Term sheets go out before the requirement is understood”

    A proposal is sent after the first tour, before anyone asked about budget approval or the end of the current lease. It is then negotiated against a rival's sharper offer.

  • “Nobody owns the deal during legal review”

    Once the term sheet is signed, leasing hands over to legal and the occupier's questions sit between two teams. Deals slip in that gap.

  • “Fit-out is left out of the sale”

    The tenant's first experience of the building is the fit-out period. If nobody from leasing is around, the referral and the later expansion go with it.

What we do

What we deliver for commercial real estate developers and brokers.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A written process from requirement to handover

    Each step named the way your team says it, with what to ask, what to send and what to record.

    Result: A new leasing manager runs a deal the way your senior one does.

  2. A qualifying call checklist

    Area or seats, move date, current lease end, budget basis, decision makers and which other buildings are being shown.

    Result: Tours go to requirements that can sign.

  3. A standard term sheet and approval route

    Your term sheet format, the points management may concede, and who approves anything beyond them.

    Result: Negotiations stop waiting on the owner's phone.

  4. A register of open lease clauses

    Each clause still being argued, who holds it and when it was last answered, from term sheet to registered lease.

    Result: A signed term sheet does not stall for want of an owner.

  5. A fit-out handover routine

    An introduction to the projects team, the building's fit-out rules and a named contact through the rent-free period.

    Result: The tenant starts the lease with a contact who answers.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

Take an occupier from a broker's requirement to a registered lease in fixed steps.

Requirement and qualifying call
Ask the area or seats, move date, current lease end, budget basis and who signs. Record the introducing broker and the time the requirement arrived.
Site tour
Show the floor, the services and the common areas. Record which floors were shown, who attended and what they objected to.
Test fit and proposal
Send a test-fit layout on the floor they liked, with the commercial proposal. Record the layout version, the seats it holds and the date sent.
Term sheet or LOI
Agree rent, lock-in, escalation, deposit, rent-free period and car parks in writing. Record each point as agreed or open, and who approved any concession.
Lease deed and registration
Share the draft lease, log every clause the occupier's lawyer raises, and fix the stamp duty and registration date. Rules differ by state, so your lawyer leads this step.
Handover for fit-out
Hand over the floor with the fit-out rules, the drawing approval route and a named contact. Record the lock-in end and renewal dates for the next sale.

Who it is for

This is written for these commercial real estate developers and brokers.

  • Office and IT park developers
  • Retail, high street and showroom space owners
  • Warehousing and logistics park developers
  • Industrial shed and land owners near state industrial estates
  • Commercial brokers and tenant representation firms
  • Managed office and coworking operators
  • Sellers of pre-leased shops and offices
  • Owners of single commercial buildings leasing floor by floor

Before you decide

When this may not be the right fit.

  • You have not yet agreed who approves a discount or a clause, so a written process would record an argument.
  • The team signs very few leases in a year and the steps live easily in the leasing head's notes.
  • You expect the process to speed up a tenant's board, when its approvals sit outside your control.

Before you decide

Agree the work. Know how to judge it.

Sales process for commercial real estate developers and brokers: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from commercial real estate developers and brokers. Anything missing is noted in the written scope, with who will supply it.

Three signed leases to trace
Choose three leases of different sizes and their file notes. We trace each from first call to handover to see where the process really ran and where it stalled. With fewer, the drawing is less certain, and we mark it as a first draft. Include one lease that was difficult, since it shows where the path really bends and who got involved.
The present term sheet, if one exists
Whatever the leasing desk sends today, even if it is a mail or a chat message. We compare it with the clauses that cause delay. If none exists, your adviser drafts the first one, and we only organise the route for changes. A photograph of a printed copy is acceptable if the original file cannot be found today, and we will type it out with you.
The route for approving deviations
The name of the person who may agree a change to rent-free period, deposit or lock-in, and when they must be asked. The route only works if it is real. If approval is informal, we write down the present habit before improving it. Write the names of the people with authority as well as their titles, and a deputy for when they travel.
Leasing, projects and legal contacts
Names and roles of the people on each side of a deal, with the hours each can be reached. The register and handover depend on these names. When a role is shared, tell us who decides, to avoid an answer waiting on two people. Include the numbers for the people who handle after-hours calls on a tour day or a possession day.
Fit-out and possession guidelines
The document or note that tells a tenant how fit-out works in your building: approvals, working hours, deposits and inspections. The handover note draws on it. If it is only in the projects head's mind, we write it down together. Even a page of bullet points is enough to start from, since we turn it into a clear note with you.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Draw the path from requirement to handover

    We sit with the leasing head and the projects head and draw the actual path of a lease: enquiry, qualifying, tour, test fit, term sheet, legal review, signing and handover. You correct us where the drawing differs from practice. The written path is the base for the rest. Steps that happen only in someone's head are written down so that a new member of the team can follow them.

  2. 2

    Write the qualifying call checklist

    We write a list of what the leasing desk must know before sending any terms: area, move date, headcount, the decision-maker, the current lease end and the budget band. You decide which answers are compulsory. A tour is booked only when the list is answered. The checklist fits on one page and is kept beside the phone, so the desk uses it on a real call.

  3. 3

    Fix the term sheet and who approves changes

    We help you agree one standard term sheet and a route for any deviation, naming who approves it. You and your adviser decide the content, and we write no commercial terms ourselves. The result is a sheet leasing staff can send without waiting for a call from the owner. Anything outside the sheet goes to the named approver, with a note of what was asked and what was agreed.

  4. 4

    Open a register of lease clauses under discussion

    We build a simple register showing each open clause on each live deal, who owns the answer and what is waiting. You choose who keeps it. The register ends the silence during legal review, because every open point has a name beside it. A deal with a clause open for a long time is shown at the top of the register, so the leasing head sees it first.

  5. 5

    Walk the fit-out handover with projects

    We walk the handover with the projects team: possession, fit-out start, inspections and the contacts the tenant needs. You decide which items the leasing team stays involved in. A handover note is the result, passed to the occupier on signing. The note lists the contacts for utilities, security and the building manager, and the documents the occupier needs at possession. The occupier acknowledges it at possession.

  6. 6

    Read each stage against the starting figures

    We compare the number of requirements reaching each stage, and the deals stalled at legal review, with the record taken before the work began. You tell us what caused each stall. The checklist, term sheet route and register are changed from that reading. Deals that stall at the same stage twice are examined with the people involved, and the cause is written down.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

When should we send the commercial terms?
After the qualifying call and the tour, not before. Terms sent to a requirement you do not understand become the floor price in the negotiation. Give the rent basis and CAM early if asked, and hold the full proposal until you know the move date and the decision makers.
The occupier only compares rent per square foot. What do we do?
Compare total cost instead: carpet against super built-up area, CAM, power charges, parking and the fit-out you fund. Lay your building and the rival side by side for them. A lower headline rent on a less efficient floor can cost more.
Who should lead the tour, leasing or the projects team?
Leasing leads, with a projects or facilities person there for power, HVAC and fire questions. Admin heads ask technical questions on the floor, and a guess is remembered. Record what was left unanswered and send the answers the next day.
Should our team stay involved after the lease is signed?
Yes. The fit-out period is when a tenant decides whether you are easy to deal with, and that shapes the renewal and any expansion. Name one person from leasing as the contact until the tenant moves in.
Who should own a deal during legal review?
The leasing manager should keep the relationship and the deal, and legal should own each document. The register of open clauses shows who owes an answer, so the leasing manager can chase without drafting. We name a single person for each live deal and write that name beside every open point, so the occupier never wonders whom to call. Legal review involves four or five people, so one clear owner on the leasing side prevents the silence that follows when each assumes another has called. The register shows the open points and who must answer them, and the leasing manager's job is to chase each one.
Should the sales process differ for a retail chain and an office tenant?
Yes, in the qualifying and tour stages, not in the legal route. A retail chain asks about footfall, frontage and neighbouring brands, and an office tenant asks about efficiency, power and parking. We keep one overall path and add a short checklist for each occupier type, which keeps the process simple while the questions fit the buyer. The overall path stays the same, because the term sheet, legal review and handover are alike for everyone. Only the questions at qualifying and on tour change, so we write one extra checklist for each occupier type and keep the stages consistent for the team. The team then keeps one process for all occupiers.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.