Skip to content
GullySales

Excavation and earthmoving contractors · CRM

Record every site, every call and every machine in one place, not in three phones.

A CRM for an earthmoving contractor is the record of each site enquiry, quote, booking and repeat customer, kept where the office and the operators can see it. GullySales sets up what to record, who updates it and the follow-ups that fall due, before anyone buys software.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A contractor and engineer review plans beside an excavation site

Last updated 14 Nov 2026.

For excavation and earthmoving contractors

Where it usually goes wrong, and what we would do.

  • “The booking diary and the enquiry list are different books”

    The machine schedule shows who is booked. It does not show who asked and was told no, or who has a job next month.

  • “Builders reappear under different names”

    The same project manager calls from a personal number, the site engineer's number and the office. Three entries for one customer hide the repeat work.

  • “Nobody writes down why a quote lost”

    The job went to a rival with a lower hourly rate, or the machine was busy, or the owner decided to wait. Without the reason, every lost quote looks the same.

What we do

What we deliver for excavation and earthmoving contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. An enquiry sheet with site, machine and date

    One row per site: the caller, the location, the job, the machine, the date wanted, the quote and the outcome.

    Result: Every enquiry has a status and nobody has to remember it.

  2. A customer list with the sites under it

    Each builder or plot owner listed once, with the sites, the machines used and the last date worked.

    Result: You see which builders keep coming back.

  3. Follow-up dates on open quotes

    A date set against every quote that has not become a booking, with who will call and what to ask.

    Result: A quote does not go cold unnoticed.

  4. A lost-quote reason list

    A short list: rate, machine busy, date, owner postponed, chose a rival, no reply. Picked on every lost quote.

    Result: You learn whether you lose on price or on availability.

  5. Machine and operator availability alongside

    The schedule linked to the enquiry sheet, so a request for next Tuesday gets an honest answer on the call.

    Result: You stop promising a machine that is already booked.

  6. A short sitting over open quotes and repeat customers

    Fifteen minutes with the sheet to see open quotes, sites about to start and customers due a call.

    Result: The sheet gets used because it is used for something.

How the result is measured

  • Enquiries logged in the CRM
  • Data completeness
  • Reports generated from CRM data

Recorded as a baseline before work starts, so every later report has an honest comparison.

What to record, and when

What an earthmoving contractor should write down about each enquiry, site and customer, and whether software is needed yet.

Caller, site and the contact on site
Write the person who called, the person who signs the work order and the person who will meet the operator. They can be three different people, and the work order may sit with the second.
Job type, machine and ground
Note the job, the machine that fits, and what you know about the ground: soil, rock, water, slope. This fixes the rate basis and the machine. Update it after the site visit.
Date wanted, date promised
Record both. A gap between them is how bookings sour. If the machine was busy and the buyer waited, write it, because it explains a later lost job.
Quote basis and amount sent
Hourly, per load or per job, the amount and the minimum. A quote without its basis cannot be compared with what the builder was told by a rival.
Outcome and reason
Booked, lost or deferred, with one reason picked from the list. Add the date. Reasons are where the pattern appears, and are worth more than the count.
Do you need software yet?
A shared sheet is enough while one or two people take enquiries. Move to a CRM when several people update it, builders have several sites each, or reminders are missed. Choose after the sheet is being used.

Who it is for

This is written for these excavation and earthmoving contractors.

  • Backhoe loader owners with one or two JCBs
  • Excavator and hydraulic rock breaker operators
  • Basement and foundation excavation contractors
  • Site development and plot levelling contractors
  • Tipper and earth transport owners
  • Pond digging and farm earthwork contractors
  • Road and trench work sub-contractors
  • Mixed fleets supplying builders and layout developers

Before you decide

When this may not be the right fit.

  • You run one machine for a few regular builders and a notebook holds all you need, so a record would be extra work.
  • Nobody has time to enter a call after the day on site, so a tool would stay half filled.
  • The same enquiry is still counted twice across the diary and the phone, so clean up the booking diary first.

Before you decide

Agree the work. Know how to judge it.

CRM for excavation and earthmoving contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

List the records your team uses and show how an enquiry becomes an order today. Bring examples of duplicate entries, missing owners, and reports that require manual correction.

Make the scope clear

Agree the stages, required fields, access roles, and integrations before configuring the system. Separate software subscriptions from setup, data work, and training.

Check the work in use

Ask the people who will use the CRM to complete a real handover and find the next action without help. Check that the management report can be traced back to individual records.

Know when to change course

If the process is unclear, buying a more complex CRM adds more places for confusion. Start with the minimum fields and rules the team can use consistently.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from excavation and earthmoving contractors. Anything missing is noted in the written scope, with who will supply it.

The booking diary for the last season
Any record of jobs, in whatever form, so we can see how a booking is actually written today. If the diary lives in an operator's head, we start with the last month's bills and rebuild from them.
The list of open and lost quotes
Quotes sent and not answered, with whatever reason you remember. These seed the follow-up dates. Where none are recorded, the lost-reason list starts empty and fills only as new quotes are closed. Include the builder's name as spoken on the phone, since the same firm is called by its owner's name on site.
One person who will enter the data
A named person in the office, not an operator on site, who updates the sheet during or just after calls. Without one, the record decays within weeks and we advise against paying for software.
Machine and operator availability sheet
Which machine is with which operator and which days are blocked for repair. The record links bookings to availability. Missing, it is added as a plain column and the dispatcher completes it. Where two operators share one machine across shifts, tell us, because the sheet must show whose name is against the day.

How it works

How the CRM work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Lay the booking diary beside the enquiries

    We ask for your booking diary, the enquiry notes in the phone and any sheet the office keeps, and lay them side by side. Where the same builder appears under three names, we mark it. What exists afterwards is a map of where a job's record currently lives. We also note which entries are only a phone number with no name, since those are the enquiries easiest to lost.

  2. 2

    Name the fields with your office

    With the person who writes the diary we decide the fields: site, machine, hire basis, date, who quoted, and why a quote was lost. You cut anything the office will not fill in. The list stays short enough to complete while a call is still on. A field that only the owner could fill, such as the margin on a job, is left out, because the office staff cannot be asked to guess it.

  3. 3

    Load customers with their sites below

    We enter your builders and plot owners once, with each site listed beneath the customer, so repeat work is visible. You review the merged names and tell us which are the same business. Nothing is bought yet; a sheet is enough to prove the layout.

  4. 4

    Run a week of real calls through it

    The office enters live enquiries and booked jobs while we watch for fields that stay empty or entries that arrive late. Operators are asked for only one thing, the end-of-job note. You decide whether the tool is worth keeping or whether the sheet can stay. We also check whether an operator's end-of-job note reaches the office the same evening, since a booking that stays open on the sheet blocks the next quote for that machine.

  5. 5

    Agree who owns the data afterwards

    We write down who holds the login, who can see rates and who can export the list, so that a departing staff member does not take the customer list. You sign the short rule sheet. The open quotes and repeat customers sitting list is then read at the first sitting.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales management. A target, a review routine and someone who owns the number.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3 · you are here

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should I start with a spreadsheet or a CRM tool?
Start with a sheet that your office will actually fill. If the columns are stable after a few weeks and several people need reminders, move to a CRM. Buying software before the habit exists gives you an empty tool and the same missed follow-ups.
The operators will not update anything. What do I do?
Do not ask them to. Operators report the day's work to the office by call or message and the office writes it down. Ask the operator for one thing only: the site and hours each evening.
What about chats and calls that never reach the sheet?
Treat the chat as the source and the sheet as the record. The office reads new chats each day and adds one row per site. A booking that is only in a chat is not yet a booking in your books.
Who owns the data if a staff member leaves?
The company does, so keep the sheet or CRM in a company account with your login as owner. Do not let customer lists live in personal Gmail, personal phones or one person's laptop. Remove access on the day someone leaves.
Can the CRM replace my billing software?
No. The record holds enquiries, quotes, bookings and follow-up dates, while billing stays in the tool your accountant uses. We add one field that carries the invoice number so a job can be traced from first call to bill, without asking your accountant to change anything.
What happens to the records of builders who stopped calling?
They stay on the customer list, marked by the date of the last job. That date feeds the lapsed-customer call list, so a builder who stopped is called and asked why, and the reason is written in words. Deleting them would remove the one record that shows who left and when.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.