Skip to content
GullySales

Excavation and earthmoving contractors · Sales process

Turn a call about a machine into a site visit, a quote and a signed work order.

A sales process for an earthmoving contractor is the order of steps from the first call to the signed work order and the handover to the operator. GullySales writes the steps your office follows, names who does each, and records where jobs drop out.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

A contractor and engineer review plans beside an excavation site

What sales process means

A sales process is the fixed sequence of steps, such as enquiry, site visit, quote and order, that every deal is expected to pass through in the same order. GullySales writes this sequence down for your business and checks that every salesperson actually follows it.

Plan the next part of the work

Last updated 21 Nov 2026.

For excavation and earthmoving contractors

Where it usually goes wrong, and what we would do.

  • “The quote is given on the phone and never confirmed”

    A rate said over a call is forgotten by the next day. When the invoice arrives, the builder remembers a different number.

  • “The site is not seen before the machine goes”

    The operator arrives and finds a narrow lane, a wet plot or a rock bed. The day is lost and the argument over who pays begins.

  • “The work order is verbal until payment is due”

    A builder who booked by phone disputes the hours at invoice time, and nothing signed supports your count.

What we do

What we deliver for excavation and earthmoving contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A five-step sales sequence in writing

    Enquiry, questions, site visit for larger jobs, written quote, booking confirmation, each with an owner and a record.

    Result: Everyone in the office knows what happens next.

  2. A qualifying call

    The four questions on the card, plus whether the owner has permission for the job and for moving the soil.

    Result: You do not send a machine to a site that cannot receive one.

  3. A site visit slip and photographs

    A short form and three photographs from the visit, attached to the quote and kept in the sheet.

    Result: The quote is for the ground that was seen.

  4. A written quote and terms sheet

    Basis of charge, the minimum, what the owner provides, what stops the clock for rain or access, and how the hours are counted.

    Result: The invoice holds no surprise.

  5. A booking confirmation and hours log

    A message on booking that restates the site and the day, and a daily hours slip signed by the site contact.

    Result: The invoice matches a slip someone signed.

  6. A handover to billing and the next call

    The hours and the invoice details passed to the accounts, and a note to call the builder about the next phase.

    Result: The job ends with payment and a reason to call again.

How the result is measured

  • Enquiries with a named owner and next action
  • Opportunities meeting the stage evidence
  • Time waiting at each decision
  • Handovers returned for missing information

Recorded as a baseline before work starts, so every later report has an honest comparison.

Steps of a sale

The steps from the first call to a signed work order for an earthmoving contractor, and what to ask and record at each.

Enquiry
Write the caller, the number, the site and the job. Ask how they found you. A call that arrives without a site is a conversation about a rate, so ask for the location pin before saying more.
Qualify
Ask what is to be dug, how deep, in what ground, by when, and who signs the work order. Ask whether the owner holds the permission needed for the work and for the soil. Decline politely what your machines cannot do.
Site visit for larger jobs
Go, or send someone who can read ground. Check access, slope, water, neighbouring walls and where the spoil goes. A short visit saves a lost day, so photograph and note what you saw.
Quote
Send the basis of charge, the minimum booking, what the owner provides and what stops the clock. Send in writing the same day, and say when you will call to discuss. Verbal rates are the start of disputes.
Follow up
Call the builder after the quote and ask a real question: have they compared, is the date fixed, is anything unclear. A second call a few days later, before the machine is booked elsewhere, is part of the job.
Confirm and hand over
On booking, send the site, the day and the contact on site. Give the operator the same sheet. After the job, record the hours, the bill and the date to call about the next phase.

Who it is for

This is written for these excavation and earthmoving contractors.

  • Backhoe loader owners with one or two JCBs
  • Excavator and hydraulic rock breaker operators
  • Basement and foundation excavation contractors
  • Site development and plot levelling contractors
  • Tipper and earth transport owners
  • Pond digging and farm earthwork contractors
  • Road and trench work sub-contractors
  • Mixed fleets supplying builders and layout developers

Before you decide

When this may not be the right fit.

  • You work as an operator-owner and quote on the spot for each regular builder, so a written sequence would slow a trusted routine.
  • Your hourly and load rates are not fixed, so a written quote step would change with every site.
  • You have no one to visit sites, so a site visit step could not be followed.

Before you decide

Agree the work. Know how to judge it.

Sales process for excavation and earthmoving contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Bring examples of deals that moved forward and deals that stalled. Record what the buyer had actually agreed at each stage rather than relying on the salesperson's confidence.

Make the scope clear

Define the entry and exit rule for each stage, the owner, and the document or decision that moves the deal. Agree how exceptions will be handled before rolling the process out.

Check the work in use

Take a live enquiry through the proposed stages with the team. Two people reviewing the same evidence should place it at the same stage and agree the next action.

Know when to change course

If a stage produces no useful decision or handover, remove it. The process should help someone do the next piece of work, not create administration for its own sake.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from excavation and earthmoving contractors. Anything missing is noted in the written scope, with who will supply it.

The last five quotes and their outcomes
Papers or messages for five recent quotes, won and lost, with whatever you recall about why. They show where the process currently breaks. With fewer, we trace by interview and the first read of drop-outs is less firm.
Your present terms for hire
Whatever you now tell buyers about minimum hire, rain, breakdown and diesel or operator supply, even if only spoken. We write the terms sheet from it. If your terms differ by operator, you choose which version stands.
A site visit slip you will actually use
A decision on who visits larger sites and how the slip is carried back to the office. Without a named visitor the site step is dropped and the quote stays a phone quote. If the owner visits every site personally, say so, and the slip is written for the owner to fill in alone.
Agreement on a lowest acceptable rate
A figure only you can set for each machine, below which a job is declined. We never choose it. Without it the cheapest-rate buyer is answered one way by one person and another way by the next.

How it works

How the sales process work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Trace one real job from first call

    We pick a recent job, a basement or a layout levelling, and follow it from the first call to the bill with the person who handled it. Where the rate was said, who saw the site and when the booking was fixed are each marked. The written trace becomes the starting picture. We also mark the point where the machine was already promised to someone else, since that is where an honest answer is hardest to give.

  2. 2

    Agree the five steps and their owners

    From the trace we draft the five steps and name who does each: the person who answers, the person who visits, who quotes, who confirms and who bills. You change anything that does not fit your office. A step with no owner is cut or merged.

  3. 3

    Write the terms sheet in plain words

    We set the basis of charge, the minimum, what stops the clock for rain or breakdown and what the owner provides on site, in language a plot owner can read. You approve every line. The sheet then goes with each written quote. A line on payment, such as the part due before the machine moves, goes in only if you already ask for it.

  4. 4

    Rehearse a call with the office

    We play a plot owner and a builder on the phone while your staff use the steps, and note where the rate is blurted or the site question is skipped. You listen in. The qualifying call is adjusted to the way your office really speaks.

  5. 5

    Run live jobs and mark the drop-outs

    The office uses the steps on real enquiries and records at which step each one fell away. We read these with you in terms of calls, site visits, written quotes and booked jobs. You decide which step to tighten first. Where several quotes dropped at the same step, we sit with the person who handled them and ask what the buyer said at that moment.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Who should do each step?
The office takes the enquiry and sends the quote. Someone who can read ground does the site visit, whether the owner, a supervisor or a senior operator. The operator handles the work on site. Write the names against each step.
When should I give a rate on the first call?
Give the basis and a range of what it depends on, and say the firm quote follows the site details. A single figure on a first call is held against you whatever the ground turns out to be.
What should I do with a buyer who only asks the cheapest rate?
Say plainly what your rate includes and what the cheaper machine leaves out, such as an experienced operator or a back-up machine. If the buyer still wants the lowest rate, let the job go. Record the lost reason.
Do I need a signed contract for a one-day hire?
Not a long contract, but a booking message or slip that states the site, the day, the basis of charge and who signs the hours. For larger jobs, a written work order from the builder. Your own lawyer can check the wording.
Does the process mean more paperwork for my operators?
Very little. Operators handle two things: the hours slip signed when the day's work is done's work and a photograph of the finished ground. The office carries the quote, the confirmation and the terms sheet. If the operators would find it a burden, the first version leaves their step out entirely.
What if the buyer will not wait for a written quote?
Send a short confirmation message the moment the call ends, with the machine, the basis of charge and the date. It serves as the written quote for a small job. For larger work we hold the site visit slip first, because the ground decides the rate.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.
What do you need from us?
Your brief, and a conversation. After that, access to whatever this work touches, such as your website, your accounts or your enquiry record, and time with the people who handle your enquiries.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.