Skip to content
GullySales

Flooring contractors · Social media

Use Instagram and Facebook to show finished floors to owners and designers.

Social media marketing for a flooring contractor means posting the floors your crew has finished so that owners, designers and builders see the work. GullySales works on what to photograph, how to caption it and how to turn a comment into a site-measure request.

Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

Flooring companies: show a real physical business scene illustrating Room-wise measurement and quote. Quote room by room from measured areas, with your wastage rule applied as area becomes boxes. Underlay, skirting and laying lines are added to the quotation format at set-up.

What social media means

Social media is the ongoing posting your business does on platforms such as Instagram, Facebook and LinkedIn to stay visible to customers and prospects between purchases. GullySales plans a posting calendar, writes captions and designs the images so the page looks active and answers what a visitor would ask.

Last updated 14 Nov 2026.

For flooring contractors

Where it usually goes wrong, and what we would do.

  • “A floor photographs badly unless it is prepared”

    Dust, scattered tools and a flash reflecting off polish ruin a good floor. Ten minutes of sweeping and daylight at the end of the job gives the contractor a picture worth posting.

  • “The designer is the real audience”

    Interior designers scroll Instagram for installers. A feed with clear before and after pictures of the same room tells a designer you finish what you start and can be named to a client.

  • “Process posts earn trust that finished posts cannot”

    A short clip of levelling, spacing and grouting shows the care nobody sees once the floor is covered. A buyer who has been told the cheap mason skips these steps will notice.

  • “Comments go unanswered and the buyer moves on”

    Someone asks the rate under a post and nobody replies. Those comments are enquiries. A reply that asks the floor type and area, then moves to WhatsApp, turns them into measures.

What we do

What we deliver for flooring contractors.

The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.

  1. A shot list for each job

    A short list of pictures to take before, during and after: room, close-up of joints, skirting, finish.

    Result: Every job leaves a set of usable photographs.

  2. Before and after posts

    Pairs of the same room framed identically, with floor type, area and city in the caption.

    Result: A viewer sees the change and knows what was done.

  3. Process clips

    Short videos of surface preparation, levelling and grouting with a plain caption.

    Result: The care in unseen steps is visible to the buyer.

  4. A comment reply routine

    A set of replies that ask floor type and area and move the conversation to WhatsApp.

    Result: A rate question becomes a conversation about the floor.

  5. A designer-facing highlight

    A saved collection of finished sites arranged by material, for designers to browse.

    Result: A designer can find your granite or wooden work in one place.

How the result is measured

  • Posts published
  • Engagement rate
  • Enquiries from social profiles

Recorded as a baseline before work starts, so every later report has an honest comparison.

Posts to plan

Post the floors in a way that shows the work, not the photo.

Before and after of a hollow-sounding floor
Two photographs and a line on what was found underneath, shot with the owner's agreement.
Levelling and screed in progress
A short clip of the base being checked, since owners see the finish but trust the crew for what is hidden.
Kota stone laid in a courtyard
A wide photograph taken at the right hour, with the stone type and the area named in the caption.
Epoxy floor at a plant
A finished-floor shot approved by the plant, showing the method and the line markings the buyer asked for.
Designer's project walkthrough
A reel crediting the designer, which gives them a post to share with their own clients.

Who it is for

This is written for these flooring contractors.

  • Tile laying contractors for homes and apartments
  • Granite, marble and Kota stone flooring contractors
  • Wooden, laminate and vinyl flooring installers
  • Floor polishing and restoration specialists
  • Industrial flooring contractors for VDF, epoxy and IPS floors
  • Anti-skid and outdoor paving contractors
  • Large floor contractors working with builders on multi-floor projects
  • Interior designers' preferred floor installation teams

Before you decide

When this may not be the right fit.

  • You have no owner permission to show their homes, so every post would need a new request first.
  • No one can answer comments or messages from the posts, which would leave buyers waiting on a closed door.
  • You want posts to replace the site-measure visit; a social post starts a conversation and cannot quote a floor.

Before you decide

Agree the work. Know how to judge it.

Social media marketing for flooring contractors: use these checks to prepare, choose the scope, and review what changes.

Bring the right evidence

Review the posts that produced useful conversations, not only the ones with the most views. Gather buyer questions and decide which team member can contribute credible material.

Make the scope clear

Choose the audience and channel before setting a posting volume. Agree who supplies material, approves posts, and handles messages, including complaints or questions the agency cannot answer.

Check the work in use

Follow a post through to the profile, website, and response. A useful report explains the quality of conversations and enquiries, alongside reach and engagement.

Know when to change course

If publishing takes time away from unanswered buyer messages, fix the response routine first. Do not expand to another channel without a clear reason for being there.

These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.

Before we start

What to have ready before the work starts.

The records, access and decisions this work needs from flooring contractors. Anything missing is noted in the written scope, with who will supply it.

Admin access to the business pages
We need to post and read messages on the business page, not through a personal profile. A shared login is acceptable if the owner holds the recovery details. If access is missing, we write posts that you publish yourself, and replies are slower.
Permission to show each finished floor
Owners may be happy with a photograph of a floor but not the address. A message from them is acceptable. If permission is missing, we use only your own sample boards and show-flat work, which has less force. Where an owner has agreed only on the condition of no address, we record that condition beside the photograph so nobody forgets it.
A crew member willing to take pictures
One person on each site must remember to photograph the floor before the furniture arrives. They need a short briefing from us. If nobody is named, the best moment is lost and the page fills with pictures of dust and tools.
A decision on posting rates
Decide whether any rate or range will be shown in posts. Our advice is to keep rates for the measured visit, because floors differ. If you do show a figure, we need a statement of what it covers. Without a decision, comments asking for the rate go unanswered.
The designers you want to reach
List the interior designers and architects who have recommended you or whom you hope to work with. A short list is acceptable. Without it, the designer-facing posts speak to nobody in particular and may be wasted. We then draft a first message that the estimator can send to each designer, which you read and send from your own number.

How it works

How the social media work runs

The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.

  1. 1

    Go to a site on the day of finishing

    We ask your crew lead to tell us when a floor is nearly finished, and someone from your side visits with a phone. We take our guidance on light, angles and the cleaning needed before photographs from that visit. You decide which sites may be shown. The first batch of pictures is taken on a real floor, not a staged one. We also note which finished floors photograph badly, such as dark stone or glossy vitrified tile, and ask the crew to carry a cloth and a lamp for those.

  2. 2

    Write the shot list for each kind of job

    From that visit, we write a short list for the crew to follow on every job: the doorway view, the corner joint, the skirting edge, a close shot of the finish and a wide room view. Process shots, such as screeding or grinding, are added. You trim the list to what the crew can really do while working.

  3. 3

    Choose the platforms by who buys from you

    We ask who actually calls you: homeowners, designers, builders or plant heads. Owners and designers look at Instagram and Facebook, plant heads rarely do, and builders prefer a direct message. You agree on the one or two platforms we start with. The others are left alone until the first ones are kept up.

  4. 4

    Draft captions and the answer to the first comment

    For each post we write the caption naming the floor, the locality and the work done, and the reply to the first question a viewer will ask, such as the material used. You read the text and cut any claim you cannot prove. Rates are kept out of posts and offered only when a measure is booked. Where a floor was laid for a designer, the caption names the designer only if they have agreed to be credited.

  5. 5

    Set the rules for crew photographs and comments

    We agree who may post, who answers comments and how a comment becomes a site-measure request. Customers' homes are shown only with consent, and brand names only where the brand allows. You sign off a one-page rule sheet. The crew know what never goes online, such as a client's address.

  6. 6

    Count the measure requests that posts brought

    We note which posts led to a message, a comment asking for a visit or a designer's enquiry, and set that beside the earlier count of requests from social media. You see which floors and which kinds of post to repeat. Likes are shown for information but are not read as the result.

Where this fits

Three pieces of sales work, in this order.

This work sits inside sales process design, at stage 0, foundation. The audit comes before it, and sales management keeps it running.

  1. Step 1

    Sales audit

    Find where deals are being lost and what to fix first.

    Start here if you cannot say where orders are lost.

  2. Step 2 · you are here

    Sales process design

    One written way to sell, from first enquiry to repeat order.

    Start here if every salesperson sells differently.

  3. Step 3

    Sales management

    A target, a review routine and someone who owns the number.

    Start here if the team has targets and no routine.

Tell us what you need Your brief is read before we call. Scope, fee and term in writing.

FAQ

Questions owners ask before they call.

Not here? More answers, or ask on WhatsApp.

Should we post the rate on social media?
A rate without the inclusions misleads. Post the floor and say what the quotation covers, and give the figure after a measure.
Should a flooring firm have a profile on every social platform?
No. Pick the one where your buyers look: Instagram for owners and designers, LinkedIn for industrial buyers. Do one properly before adding another.
Can we show customers' homes?
Only with the owner's permission, and without house numbers or family details. Ask before you photograph, not after.
Do tile brands object to our posting their products?
Name the brand only if you have the right to, and check the brand's current rules for contractors. Posts work without it, because the buyer wants to see the laying, the joints and the finish rather than a logo.
Can we tag tile and stone suppliers in our posts?
Tag a supplier only where it has agreed, and check the supplier's current terms for using its name and images. Tagging can bring the supplier's own audience, but a supplier may object if the post suggests an endorsement it never gave. Name the material used in the caption as a plain fact, and tell the supplier before the post goes live. Do not use brand logos as decoration.
Who should answer the comments, the owner or the estimator?
The estimator or a trained office person should answer, because comments are where a measure request starts, and the answer needs the floor type, the locality and the area. The owner steps in for builders and plant heads. Write a short rule sheet so no comment waits for the owner, and agree the line to use when a viewer asks for a rate.
How much does it cost?
There is no price list, because the work differs by business. The fee is scoped after we have read your brief and spoken to you, and put in writing before anything starts, split into our time, your media spend and production.
How long is the contract?
The term is agreed in writing after we have spoken, along with the fee and the reporting. It is never a default twelve months, and renewal is decided on the numbers against the baseline recorded at the start.
How soon will we see results?
It depends on the trade, the channel and what is already in place. After we have read your brief and spoken to you, we say what we would expect to move first and how it will be measured against the baseline. Nothing here is guaranteed.
Who will actually do the work?
The person you speak to before anything starts. We work from one office in Nagarbhavi, Bengaluru, with no account managers in between.

Your next practical step

Tell us what you are trying to grow, and we will read it before we call.

Eight short steps, mostly taps. Skip anything you would rather answer on the call.