HVAC contractors · Website
Build a site that shows a consultant what you installed before they call.
A website for an HVAC contractor is a reference library for consultants, builders and plant engineers who look you up after hearing your name. It should show systems, sites and how to send a drawing. GullySales plans and writes the pages and the enquiry form, and your team supplies the project facts.
Scope, fee, reporting and term are agreed in writing after we have read your brief and spoken to you.

What website means
A website is the page a customer lands on after searching, clicking an advert or scanning a code, and it decides whether they call or leave. GullySales builds and maintains sites that load quickly, explain the offer plainly and make the enquiry form or phone number easy to find.
Last updated 14 Nov 2026.
For HVAC contractors
Where it usually goes wrong, and what we would do.
“The visitor is checking, not discovering”
A consultant who received your introduction opens the site to see whether you have done a job like theirs. If the first page is a stock photo and a general paragraph on cooling, the check ends there.
“Projects need structure, not just pictures”
Each project page should name the building, area, system, equipment brands and tests done. A gallery of plant rooms with no words forces the visitor to guess what they are seeing.
“The enquiry form should ask for a project”
A form with a name and message gets short notes. A form that asks building use, area, system and stage gets what your engineer needs. Offer WhatsApp for drawings, since that is how drawings arrive.
“Residential service must not crowd project work”
If AC repair takes the home page, project buyers leave. Keep service on its own page and give the main menu to systems, projects and contact for consultants.
What we do
What we deliver for HVAC contractors.
The work available for this need. We agree the deliverables and responsibilities for your engagement in writing.
A site map built around systems and buyers
A structure with pages for each system, each building type, projects, about and contact, planned before any writing.
Result: The menu shows what you install and where a consultant should click.
Project pages with structured detail
A page template for each project: building, area, system, brands, testing and photographs, filled from your records with client consent.
Result: Each project is described the same way and can be compared.
System and room pages
Pages on chiller plant, VRF, ducting, clean room, cold room, hospital and ventilation work, written for the engineer who runs the room.
Result: Each system has a page in the buyer's language.
An enquiry form and drawing upload
A form capturing project details with a way to send a drawing, feeding into your offer log.
Result: Every enquiry arrives with details and a source.
Speed, mobile and tracking checks
A check that pages load properly on a phone, forms work and enquiries are recorded.
Result: A list of checks passed and faults fixed.
How the result is measured
- Page load time
- Bounce rate
- Enquiries from the website
Recorded as a baseline before work starts, so every later report has an honest comparison.
Searches your buyers type
The pages a consultant checks before agreeing to your name on a tender list.
- HVAC contractor projects completed
- A project index by system and building, each with area, system, make and role. Detail is what separates a project page from a gallery.
- clean room HVAC contractor capabilities
- A page naming filtration, pressure control and testing you perform. Your quality engineer should confirm every claim.
- VRF versus chilled water for an office
- An explanatory page that helps an owner choose, with your own view. It earns trust from the reader who has no consultant.
- HVAC contractor drawing submission
- A page and form that accepts a drawing upload and asks for the building type, area and submission date.
- AC service for homes or offices
- A separate service section, kept apart from project work. Mixing the two makes a consultant take you for a technician.
Who it is for
This is written for these HVAC contractors.
- Ducting and air distribution contractors
- Chiller plant and central AC contractors
- VRF and VRV system installers
- Clean room and pharma HVAC contractors
- Cold room and temperature-controlled storage contractors
- Ventilation and exhaust contractors for factories and basements
- Hospital and operation theatre HVAC specialists
- Testing, adjusting and balancing firms working with contractors
Before you decide
When this may not be the right fit.
- You have no photographs of installed work that clients have agreed to, so project pages would carry stock images.
- The firm has not decided whether to chase packages or service work, so a site would try to serve both and convince neither.
- The old site still brings enquiries you want and only needs its project pages updated.
Before you decide
Agree the work. Know how to judge it.
Website for HVAC contractors: use these checks to prepare, choose the scope, and review what changes.
Bring the right evidence
List the pages that support a buying decision and the actions visitors must complete. Keep examples of failed forms, unclear product information, and questions your team answers repeatedly.
Make the scope clear
Agree the page list, content ownership, integrations, and who controls the domain and hosting. Include redirects and existing search traffic in a redesign brief, before changing addresses.
Check the work in use
Complete a real enquiry journey on a phone and a laptop. Check that the confirmation appears, the enquiry reaches the right person, and tracking records the action once.
Know when to change course
If visitors can enquire but the team does not follow up, start with the sales handover. A larger website will not resolve that delay.
These are discussion points, not a fixed package. GullySales confirms the deliverables, responsibilities, fee, and term in writing after reading your brief and speaking with you.
Before we start
What to have ready before the work starts.
The records, access and decisions this work needs from HVAC contractors. Anything missing is noted in the written scope, with who will supply it.
- Logins for the domain, hosting and site
- The registrar, the hosting and the content system logins in your name. If a past developer holds them, recover them first, because a launch with no control of the domain cannot be undone. We keep a note of who received which login so access can be withdrawn later.
- Project facts for each site to be shown
- For every project that will have a page: the system, building type, area, tests carried out and how it was handed over. Your project manager can write them in rough notes. A page with no facts is not written, since a consultant who reads a vague page learns nothing about how you work.
- Photographs with the client's permission
- Clear pictures of finished work and the client's yes for each site. Sharp photos taken on a phone are good enough. Without permission we show the work and not the name, and without photographs the project pages carry stock images, which consultants recognise and distrust.
- A decision on whether prices appear
- Whether the site shows any price. We write to your choice. Showing none is acceptable if the form says what an offer needs, such as the drawing, the load and the site. Leaving the question open means the form asks too much, or too little, and buyers drop out.
- The drawing file types your estimator can open
- The formats and sizes your estimator can read, such as PDF or CAD files, and any limit on size. We set the upload to match and test it with a large drawing from a phone. If the estimator cannot open a file type, the buyer learns that only after a delay.
How it works
How the website work runs
The work itself, in order. How an engagement starts, from your brief to a written scope, is set out on our method page.
- 1
Read the site as a consultant checking you
We open the current site as a consultant would after hearing your name, and note what they can and cannot find: systems, sites, drawings, contacts. You see the gaps. This decides whether to repair or rebuild. We also test the contact page from a phone, since first visits happen in a car or on a site.
- 2
Collect the project facts from your team
Your project manager supplies, for each site you can show, the system, the building type, the area, the tests and the handover. Photographs come with it. A page without facts is not written. Where a fact is missing, the page is marked pending and not filled with a general sentence.
- 3
Draw a sitemap built around systems and buyers
We lay out pages for each system and room type, a project library and a route for sending a drawing. Residential service is placed apart so it does not crowd project work. You approve the sitemap before writing begins. The project library has the same fields on every page, so a consultant can compare two sites at a glance.
- 4
Write system and project pages
We draft pages for each system and each room type, and structured project pages with the same fields every time. Your engineers check technical lines. Clients are named only with permission. Each project page ends with a link to the enquiry form for a similar building.
- 5
Build the enquiry form and drawing upload
The form asks for a project, not a name: the building, the system, the area and the drawing. We test an upload of a large drawing from a phone and a desktop. The enquiry reaches your estimator with a source recorded. Large drawings are tested on a slow connection, because a failed upload loses the enquiry.
- 6
Launch, then check speed, mobile and tracking
After launch we check the speed, the mobile layout and the tracking of enquiries on the live site. We read enquiries against the baseline and you decide what to change. Pages that draw visits but no enquiries are listed for rewriting, and pages that are never visited are considered for removal.
Where this fits
Three pieces of sales work, in this order.
This work sits inside sales process design, at stage 1, prospecting and lead generation. The audit comes before it, and sales management keeps it running.
Step 1
Sales audit
Find where deals are being lost and what to fix first.
Start here if you cannot say where orders are lost.
Step 2 · you are here
Sales process design
One written way to sell, from first enquiry to repeat order.
Start here if every salesperson sells differently.
Step 3
Sales management
A target, a review routine and someone who owns the number.
Start here if the team has targets and no routine.
FAQ
Questions owners ask before they call.
Not here? More answers, or ask on WhatsApp.
Can the old site be repaired, or does it need replacing?
What do we need to give you?
Should we show prices?
Should the site accept drawing uploads?
How should the site handle home service enquiries?
Should project pages name the consultant?
How long is the contract?
How soon will we see results?
Who will actually do the work?
What do you need from us?
More for HVAC contractors
Related work to consider.
Closest to this: search and visibility
Also for HVAC contractors
Or start from the overview: sales and marketing for HVAC contractors.
Your next practical step
Tell us what you are trying to grow, and we will read it before we call.
Eight short steps, mostly taps. Skip anything you would rather answer on the call.